Slide 84 of 161

Design controls are those actions taken as a normal part of the development process that are designed into the process to minimize the occurrence of failure or to detect specific failure modes.

Design controls should directly relate to the Prevention and/or Detection of specific causes of failures.

Design Controls

FMEA and Control Plans Forum Discussions

	The Deming PDCA Cycle	QMS Implementation	FMEA Information	APQP Information
Auditing Information	8-D Problem Solving	Statistics	Error Proofing (Poka Yoke)	Brainstorming
Identifying Waste	Pull Systems	Lead Time Reduction	Planned Maintenance	Quick Setup
Discovering Change	Process Capability - Cp vs. Cpk	Histogram Animation	Process Loop Animation	Taguchi Loss Function
		Fishbone / Cause and Effects Animation

This page last reviewed or revised: Sun, 2013-04-21 1:09 PM EST USA - GMT {Greenwich Mean Time} -5 hours

Forums and Site Provided and Maintained by Marc Timothy Smith

This page reviewed or revised: Sunday, April 21, 2013 1:09 PM EST USA - GMT {Greenwich Mean Time} -5 hours

Marc Timothy Smith - Elsmar.com
8466 LeSourdsville-West Chester Road, West Chester, Ohio 45069-1929

(513) 341-6272 (US Phone Number)

The Elsmar Cove Privacy Policy and Statement