The Elsmar Cove Discussion Forums > National and International Business Standards > Customer and Company Specific Requirements > QS-9000 - American Automotive Manufacturers Standard

Pages : [1] 2 3

1. Chrysler's Annual Layout Requirements
2. Measuring benefit of QS9000
3. Complying with the requirement for Contingency Plans - 4.9.b.2
4. Answer to Mr. Shailesh Patel 7 Jully 1998
5. QS9000 3RD EDITION IMPLEMENTATION
6. Process Flow Diagrams - How detailed the PFD has to be
7. PPAP applicability - Supply molds to a Tier 1 supplier to GM
8. Customer Satisfaction and Dissatisfaction Measurement
9. Can my company be certified to QS TE Suppliment
10. Human resource Management - QS9000 or ISO9000 have not addressed
11. Monitoring Uptime
12. Info on when Columbian Chemicals got QS9000
13. Does QS-9000 reference a specific drawing standard?
14. Verification of Purchased Product - At the subcontractor's premises - 4.6.4
15. QOS for Tooling and Equipment - Having difficulty selecting a measurable
16. Purchasing 4.6 - Statement on purchase orders: QS-9000 compliance preferred
17. Customer advocacy should be contained in the company business plan
18. Supplier Laboratory Requirements 4.10.6
19. What defines a "change in process"
20. 4.9.2 Maintaining Process Control - Maintaining ongoing process capability
21. QS-9000 - R.I.P. (aka QS-9000 is Dead Meat and a 'Failure')
22. Inventory Control and Production Planning and QA
23. PPAP and the need to re-submit - Engineering change to a single component part
24. 4.9.1 Process Monitoring & Operator Instructions
25. QS-9000 Accreditation Body Interpretation
26. 4.16 Quality Document
27. ISO:9001:2000 Affect QS?
28. TR16949 - Thread 2 - 1 More Spec - More Costs?
29. Requirements for Registration
30. 4.10.6 Supplier laboratory requirements - applicability
31. QSR 3rd Edition, section II Run at Rate (run@rate) - What do they want?
32. Classifying Characteristics
33. QS9000 Adequacy Audit Matrix
34. What exactly is needed on the subcontractor list for evaluating subcontractors
35. Preventive and Predictive Maintenance - Information on procedures relating to 4.9.g.1
36. QS-9000 TE Supplement & Service Providers
37. Toyota & QS9000
38. Lot integrity - We have many paperwork problems - Wht can I do?
39. Where can I buy 10 CFR Part 21 in either PDF or Text format?
40. QS9000 Software - Y2K
41. QS-9000 seminars in Europe
42. Job Descriptions - Employees complaining that job descriptions are not available
43. QS9000's New Dock Audit Requirement
44. QS 9000 Issues
45. Third Edition Upgrade Surveillance
46. Theodolite Calibration - Does anyone know what to do about the ingar bars?
47. ed 3 4.9 qs 9000
48. Ford Motor Company's Black/Gray/White Box Systems
49. QS-9000 Compliant
50. Approved Product Authorization
51. Tooling and Equipment Manufacturer (TE Supplement) Registration Audit
52. Facilities and Tooling Mgt. 4.2.6
53. ISO Guide 25 - QS9000 Interpretations
54. 4.11.2 Accredited Labs
55. How many firms are third-party registered to TE (Tooling and Equipment) Supplement?
56. TE REGISTRATION
57. Laboratory Scope - Research and Development Labs - Do we need 2 Scopes?
58. Interpreting 4.4.2.1
59. New IASG 3rd Edition Interpretations
60. Calibration Laboratory Requirements - 4.11.2.b.1 IASG Interpretations
61. 4.1.4 Business Plan preparation
62. QS9000 third edition - Do APQP, FMEA and PPAP have any significant changes
63. 4.10.6.6 Lab Statistical Methods
64. Advise on applicability
65. Help on Analysis and Use of Data: Element 4.1.5
66. Third day of our ISO 9001/QS9000/TE audit - What do we put on the letterhead?
67. Audit Success
68. Clause 4.19 Servicing - Mold Makers and do produce some parts off customers molds
69. Final Product Audit (QS-9000 Paragraph 4.10.4.2)
70. Facilities and Tooling Management
71. TE9000
72. Delivery Performance
73. T. & E. Supplement
74. TE REGISTERED
75. QS 9000 Documentation
76. Purchasing Review and Approval Process
77. Skills qualification for design activity - What consistitues "qualification"?
78. Ford's FMEA Handbook Supplement
79. Is there any news about acceptance of TR 16949 by the Big Three?
80. Maintenance Objectives
81. QS9000 3rd edition, 4.17
82. QS9000 Rev 3 Printing 3 Changes
83. TE-Registration Audit
84. Training - Strategic Issue
85. Compliance Software Packages
86. Laboratory Requirements - Company Partnering with a University
87. Mold Making Area Mangement Dis-agreement
88. TR16949 or QS-9000?
89. 4.1.6.1 Notify certif. body
90. QS9000 in the steel industry
91. QS 9000 3rd Edition: Safety & Laboratory Scope
92. In 4.11 under Calibration Services states three ways of doing calibration
93. On-Time delivery
94. Marketing Issues in QS9000
95. Calibration Requirements
96. Supplier Lab Requirements/Calibration Services
97. QS9000 or TR 16949? Which should we register to? Management wants one or the other
98. FORD's QOS (Quality Operating System) and Ford's Q1
99. Hierarchy of Quality Systems and Lab Accreditation
100. TES & QSA-TE
101. TES & QSA-TE
102. FRACAS - Failure Reporting And Corrective Action System
103. Split Site Registrations
104. 4.9.3 Modified Process Control Requirements
105. Need Easy Performance Measures
106. Calibration, should we.... Go-No-Go, thread, pin, and ring gauges
107. ISO9001-2000 vs. QS9000 - What are the differences?
108. Inventory Control - only manufacture parts AFTER receipt of a purchase order
109. CI Prioritized Action Plan
110. Costs To Register
111. Semi-annual surveillance audit to Edition 3 - New Certificate is issued
112. ISO / TS 16949 vs. QS9000
113. Product Safety - 4.2.3.4 - Safety considerations relative to the supplier's product?
114. Risk Management
115. Operator Instructions
116. Preventive Maintenance & Machine Manual Control
117. Customer Service Agreements
118. TE-QS9000
119. 4.10.6.3 Laboratory Product Identification and testing
120. Should our company be ISO 9001 certified or QS-9000 certified?
121. Corrective & Preventive Database
122. Corporate/Multi-site Registrations
123. 4.5.2.1- Engineering Specifications
124. Non-Conforming Area Requirements
125. Verification of Rev Level of Customer-Supplied Standards
126. 4.8 Product ID and Traceability
127. Work Instructions - How detailed do work instructions need to be?
128. 4.10.7 Interpretation - Extends the ISO Guide 25 requirement of calibration labs
129. TE Supplement and QS9000 - The Link
130. Predictive Maintenance
131. Laboratory Environment Monitoring - Are there any "universally accepted" conditions?
132. Internal Customer Satisfaction
133. Environmental compliance
134. Retention List - Documents and Records with mandated retention periods
135. QSA-TE - Electronic version of the QSA_TE (2nd edition)
136. Gage Calibration non QS-9000 Section
137. As Appropriate -and- Shall - The importance of verbiage
138. Gage Calibration non QS Area 2nd Topic
139. Calibration - What do we need to calibrate and what don't we need to calibrate?
140. Internal Laboratory Scope - Methods & Standards
141. QS9000 vs ISO/TS16949
142. Retro fitting QS9k requirements
143. Para 4.6.3c - What is meant by the last part; ...number and issue of...?
144. TE Web Sites
145. Production Trial Runs Idiots Guide
146. Text or Flow Charts? Mixing flow charts and text in procedures
147. QS-9000 Clause 4.9.g.1 - Preventive Maintenance - Tool Wear Predictive Maintenance
148. Need to submit level 3 PPAP - New or Multiple Presses - Injection Molding
149. Older Interpretations
150. Re-certification to QS9000/TE9001
151. Mechanical Drawing Aprovals
152. PPAP can we say waiver? A bureaucratic, non value-added mess
153. Laboratory Capabality Verification based upon QS-9000 Third Edition
154. Registration Logo, Cert, and Accred Mark
155. Re-certification update
156. Ford D145A - A contract document
157. 4.2.3.4 Product Safety - What does this element want? I find it very ambiguous
158. RE: 4.6.2.1 Subcontractor Development - T/E
159. Calibration Requirements - SNC (National Systems of Calibration) accreditation?
160. AIAG approved for sanctioned training delivery
161. Should Tooling Documentation (such as tooling setup instructions) be Controlled?
162. ISO9000:2000 and QS9000
163. Is QS-9000 T/E Supplement appropriate terminology?
164. QS-9000 Implementation: APQP / PPAP Documentation
165. Checking and approval of drawings
166. Due Date for QS9000 Audit Response
167. Implimentation of Engineering changes
168. Ford's FM&SP Procedures Manual PNP05-007
169. TE Subcontractor Development
170. Change the way we need to document our work - Copies of requirements?
171. What is the difference between ISO9000 & QS9000?
172. FM&SP Procedures Manual PNP05-007
173. Effect of ISO900:2000 to QS9000
174. Scope of Registration
175. Who is OEM and OEM customers?
176. Is there new revision of TE (Tooling and Equipment Suppliers Requirements)?
177. TE Supplement and FMEA's
178. Machinery Qualification Runoff test
179. Preventive Maintenance Interpretation - Clause 4.9.g.1
180. Is the 8D process a part of QS-9000? SEC:U 8D
181. Can anyone recommend a consultant and/or registrar? T&E Supplement
182. SPANISH TOPIC - QS9K y el Tech Standar 16949
183. QS9000
184. QS-9000 Sanctioned Interpretations
185. Barcodes & Scanners
186. QS 9000 TE Cert
187. Calibration
188. Control of External Documents
189. R & M Guideline - Applicability and Training
190. QS9000 vs. E-commerce
191. Who offers QS9000 training (in Spanish) on topics like PPAP, FMEA, etc
192. QS-9000, Appendix I, #6, Confidentiality - DaimlerChyrsler - Hank Gryn?
193. QS Training - Am trying to tie training in with job descriptions
194. English or German language of QS9000 books?
195. Purchasing Procedure - Where to put Material Request in the Procedure
196. Wrestling The Bull By The Horns
197. 'Controlled' Documents
198. Organizational Interfaces
199. FMEAs, APQPs and Control Plans everytime?
200. Starting QS9000
201. Facilities and Tooling Management
202. Dock Audits - 4.10.4.2 Final Product Audit
203. Supplier Laboratory Requirements - 4.10.6 - Requirements for an In-House Laboratory
204. Seeking registration - with a twist
205. Documents
206. Laboratory Scope - Need some advice regarding our Laboratory Scope
207. No Participation
208. Getting Mgmt support after registration
209. Ford QOS - 3rd Party Auditing body able to assess the QOS Assessment?
210. AMT TE Implementation Course
211. TE 9000 - FMEA
212. ISO/QS9000 REVIEW ASSESMENT
213. QS9000 Specifications
214. accounting dept. role in QS
215. Maintaining Process Control
216. Who charges for PPAP's? Is it common to charge customers for PPAP's?
217. QS-9000 Approval
218. ISO9001 to QS9000 Compliance Problems
219. Certifying A Seltered Company
220. QS 9000 System Awareness
221. Need QS9000 cousulting and training services
222. QS9000 Section 4.10.6.5
223. QS9000 AND FORD
224. Are we qualified for QS 9000 certification?
225. Test Equipment at Work Station
226. QS9-SC/QSA-SC
227. Training Presentation for ISO9001 /QS 9000
228. Registration upgrade ISO9001 to QS9000
229. One World - One Quality System LOGO
230. Tool & building Administration
231. Control Plan content and fields - Format and Reaction Plan - 4.9.1 & 4.9.2
232. What will auditors review when going over statistical techniques?
233. Specification Standardization
234. Short Run Mfg Seeking QS9000 Certification
235. WE DID IT! Passed the muster of a QS9000 Certification Audit
236. Stability of steel material features for small bended mechanical parts
237. Personnal Employee Gages in Tool Room
238. Are Polyurethane Foam Rolls Bulk Material?
239. Ford QOS (Quality Operating System)
240. Amend
241. Requirement for "ESD" circuit boards - Clause 4.9.g1
242. Monitoring Premium Freight Charges including any charges our supplier incurrs
243. Business Plan - More than one to form the whole
244. ISO/QS9000 Procedures/Flowcharts
245. International Standards
246. Incoming product is released for urgent production purposes prior to verification
247. AIAG Labelling Requirements
248. QS9000 Clause 4.10.7 requires Accreditation for External Laboratories
249. QS9000 3rd edition - Is there a site where I can view/print the Third edition
250. Traceability - Semiconductor supplement