- How to define process sampling frequency?
- Material Thickness - Customer does not give us a tolerance
- Checking Profile Tolerance on CMM's
- Geomeasure CMM + Mitutoyo Bright-A910 CMM: Using a SCR200 Tool Changer
- Validation Testing - How many unit should I test prior to launch?
- GeoMeasure 6000 - Exporting buffers to a file
- PRG format saved in PCDMIS PRO V4.2 can't export to CATIA V5R16
- AQL vs. Cpk - Sample Size and Reduced Sample Size
- Which control chart for incoming (receiving) inspection - Sample size of 10
- Sample Size Determination - Medical Devices
- Determining sample size for drop test and waterproof testing
- Sampling Plans for Critical Defects
- How to inspect the 5 different dimensions using an optical comparator
- Seeking Information about DISCUS Software
- What does "C" in C=0 mean?
- Looking for a Kaplan-MacDonald Sampling Plan
- Inspector to Technician Staffing Ratio
- Another binomial use/misuse question
- Final Inspection for Software Product - Functional Test?
- Tolerance Stacking or Tolerance Chart - Checking manufacturing print tolerances
- What Standard Applies to This? Feature (or defects) not depicted on the print
- Inspecting surface finish on SS on a piece that can't be measured with current equip.
- +/-.0025mm tolerance on an OD - What should I use to measure it?
- Which sampling plan to use if 0.5% defective is known
- Inspection by Attributes to ensure a 99% Confidence in a Customer Contract
- RIG testing and BCR list - Heard of these acronyms?
- The best way to source reputable 3rd Party QC Services in China, Guangzhou area?
- Effective case depth of .508mm MIN. How do I measure this?
- Adhesive longevity tests - Glued silicone used in a shower to bond glass panels
- Acceptance criteria for visual defects of electronic components
- Medical device functional test - ISO 2859 or 3951
- Using Multiple Plug Gages check a large diameter
- TSC on blueprint "to square corner" - Meaning?
- Checklist for Check-Fixtures (Automotive Check Fixtures) - Injection Molding
- Measuring a tap hook angle - ANY illustrations/pictures for the correct method?
- Sampling Method for 25 pieces a week of a cable with connectors
- Sampling Evidence requirements - Pursuing AS9100
- Has anyone heard of backwards traceability?
- Basic training needs for Final Inspection people
- PCB (Printed Circuit Board) Assembly Inspection Checklist
- Combining Lots under ANSI/ASQC Z1.4 Inspection Sampling Plan
- Sampling and Yield calculation for a specific period of time (more than one batch)
- Skip Lot for product or for Supplier ?
- My C=0 sampling failed to detect parts are out of round
- Hand tool to measure angles that has been machined into stock
- Test equipment for resistance welded wire/rebar
- Strange test result form - CFG-1003 form
- How to validate the geometry of a 8 mm pitch, 22 tooth Gates HTD sprocket
- What is the preferred Inspection Method of Stainless Steel for Cracks
- Critical Characteristics need to be measured 100% if they are variable in nature
- Checking a male taper using a female air gage fixture - Air Gaging question
- Conversion Help!! Print with this dimension .2917+/-.0005 :1
- Customer rejection because he "doesn't like it." - No specific rejection criteria
- Final inspection process design for a machine shop setting.
- Torque Testing for Threaded Inserts in Sheet Metal
- Sampling - Total probability of accepting bad lot - Producer's risk
- CMM Filter Settings - Measuring perpendicularity and concentricity
- How to make a Product Specification Summary / Quality Inspection Sheet
- Needs clarification on tensile test on SS class F 431 material as per ASTM A 473
- Angularity or Composite profile - Angularity callout on a recent print
- Using Three (3) Gage Pins to Check Hole Ø
- Incoming (Receiving) Inspection of SMT components
- Anyone with Millipore cleanliness test experiences?
- SC in a circle next to feature box - Is this "Statistical Control"
- AS9100C Sampling Plans - When samples have known nonconformities
- How to display color chips - Injection molding color verification
- Sampling of Pharma excipients
- How to inspect Mylars to verify dimensions, grid lines and grid points
- Fatigue and Load Test on Orthopaedic Joints - Stems
- Print asking for Straightness of 0.013 and it has a note "Any Radial Element"
- Certifications for inspectors - Revitalizing a certified operator & inspector program
- Customized sampling plan - Acceptance sampling plan for the raw materials
- True Position of slots that have angles as basic dimensions
- Implementation of Certificate of Acceptance/Analysis in place of IQC
- Profile of datum planes - Profile callout back to datum A (itself)
- What does NO GO mean on a thread gage
- Double-sided (USL, LSL) Variables sampling plan Z1.9 - Use in Excel spreadsheet?
- Go/No Go tap gage vs. Go/No Go thread gage
- Measuring a .250 diameter hole +/.005 in Thin Laminates
- Criteria for taking Dimensional Measurements of a Painted Hole in a Part
- 100% continuous inspection question
- Sampling Plan - AQL effect on sample size
- New technique for nde structural health in steel bridges
- Zoned Defect Chart - 9 zones with 12 possible defects
- Electrical Crimp Experts - Should we accept this?
- GD&T question: Measuring basic dimensions
- Conical gauges (ISO 5356) how to use on PVC (soft part)
- (DUPRO) Inspection in China - Why it is a MUST.
- Rejection rate statistical measurement
- New version of ANSI/ASQ Z 1.4-2008?
- Measuring Hole @ .00005"
- Heat treatment inspection and Process capability index Cpk
- Is there a reject/acceptance criteria for 100% inspection??
- Recording of First Piece Inspection to meet 21 CFR 820.80e and ISO 13485 7.5.1.1
- Dyne Pen Testing for cleanliness
- Visual Inspection Calibration
- What do "GO" and "NO GO" of a thread plug gauge check?
- Positional callouts on this print - GD&T true position question
- Attribute Data - What is the required sample size (medical field)?
- Accuracy of Inspection Equipment - How precise does the measurment device need to be?
- Random Sampling question - taking samples from the same spot!
- Company or organization press NSA 211.00 specification
- Critical testing point for surgical disposal product
- 99.5% - Quality Inspection Requirement (Power / Sample Size Selection)
- Inspection filter needed - Large machine tools
- Confidence Interval for Production Sampling
- Use of OC Curves for Resampling Confidence - Sterilization based upon Z-1.4
- China GBT 14233.1:1998 test for "Easily Oxidized Substances"
- Measuring Wall Thickness on Socket Head Cap Screws
- 200 hour Salt Spray per ASTM B 117 - What should be reported?
- Functional Gages give different results - Thread Plug Gage
- C=0 vs. ANSI/ASQC Z1.4 - Part Inspection Sampling
- Visual Inspection - How do you quantify Visual Inspection for TS16949
- Double Sampling Plan Explanation for *
- Mathematical probabilities (Sampling Inspection)
- Environmental Screening of PCBAs in High Volume Electronics Contract Manufacturing
- Inspection of Diameters on a CMM (Coordinate Measuring Machine)
- Random Sampling for in-process inspection
- Samples from Lots of Incoming Raw Materials - Sampling Protocol Help
- The difference between Rz and Rz3 Surface Roughness
- Large Weldment Inspection Plan
- Color Evaluation of Tinted Transparent Plastic
- Electronic Coordinate Determination System
- How to read a BS6001 Sampling Plan?
- ASTM copyright infringement?
- Where is the line drawn between Manufacturing and Quality...
- Determining Sample Size for FDA Verification and Validation Activities
- Wire Harness Inspection Method
- Interpreting Decimals in the mm state - Off Wall Question
- Using 3 Basics to find Position - Customer says to use the X, Y and Z Basics
- Quality Control of High Tension Steel Cable Bolt - Inspection Method
- Determining Sample Size - Filling a bag with three different types of candy
- Using Inspection Instructions to Modify Drawing Requirements
- Who can provide me Dodge-Romig inspection tables?
- Critical Characteristics in Incoming (Receiving) Inspection - Inspection Levels
- Self Inspection - How to implement an "Operator Self Verification" program
- The Relationship of Sample Size and Lot Size
- Injection Mold 100% Visual Inspection - Short Shots and Debris not being found
- Inspection Tools for Flatness and Channel Depth of Bipolar Fuel Cell Plates
- GD&T: Boundary - Callout for an Oblong Hole (Slot)
- New Vendor (Supplier) Certification & AQL Question
- Specification Conversion from Sets to Individual Measurements?
- Acceptance Sampling for Bulk Materials - Anyone knowledgeable about ISO 10725?
- New CMM - Zeiss vs Wenzel vs ?? (Any Feedbacks)
- Sample Size for PCB used in a Medical Device
- LTPD, Alpha and Beta for this plan.
- Best Way to Tolerance a Cylindrical Section on a Part (Customer's Design and Drawing)
- Accurate Method of Internal Radius Check
- Understanding True position - Drawing Feature Control Frames - ANSI Y14.5
- Confidence Level II or Inspection Level?
- Subjective vs Objective Finish Issues - Stainless Steel Bar
- Positive Corrective Action - 3 parts found out of 20,000 pcs 9 months after delivery
- Measurement and Inspection of SAE J-1926 O-Ring Ports
- Reduced Sampling based on Process Capability (AS9100 Standard)
- CMM Software - Geomet vs. PC DMIS
- Chain Sampling Plan explanation and help - Reducing sample sizes (compared to Z1.4)
- In need of good Gaging house in the Midwest
- Tracking Lots for Reduced and Tightened Inspection
- Verify, Inc. Source Inspection experience?
- DOE needed without Normal Data Run - What to Do?
- Sample Size in Design Verification & Process Validation
- How to define c=0 Reject Rates
- In Process Inspection Frequency and Documentation - CNC lathe/mill work
- Need help on printing report in Camio (CMM software)
|
*Please be aware that SOME RECENT forum threads may not yet be indexed by Google. |
|
View Full Version : Inspection and Test, Sampling and Related Topics |
|