- Inspection and Testing
- 4.11 Control of Inspection Measurement and Test Equipment
- Final Dock Audit - Dock Audit (inspection) on every part number?
- Receiving Inspection by Subcontractors? Heat Treat
- Incoming Material Inspection Plan - Drawing CTQ (Critical to Quality) features linked
- Layout Inspection and Functional Testing
- Incoming Product Quality - Receiving inspection for chemical substance
- Inspection Plans - Subcontracted Electronics Assembly
- Section 4.10 - Inspection & Testing: Applicability to an R&D Company?
- Acceptance Criteria for Attribute Data Sampling Plans shall be Zero Defects
- Trying to elimate, or at least severely decrease, our incoming inspections
- Is it acceptable to use a checklist for inspection of machined parts from supplier?
- Weld Inspection of Assemblies - Agricultural spreaders manufacturer
- Do I have to do a Layout Inspection? Automotive
- Guidelines for in-process inspection of PCB repairs:Changing from end-item inspection
- Method of Disposition on Damaged Inspection,Measuring Test Equipment
- ISO 9001:2000 and Inspection - The concept of "inspection"
- Layout inspection and functional testing
- Process Capability & Inspection Frequency: Is there any relationship?
- What is the 95 x 95 Inspection Level? Either an attribute or variables type plan
- Is a separate area for final inspection required?
- Inspector Efficiency - Total hours spent divided into total number of finals complete
- Identification of Inspection and Test Status
- Previous Inspections - Gages used to calibrate other gages
- Interpretation of Ele.4.10.5 with respect to records of inspection authority?
- Inspection and Test Records - Question on electronic retention
- Final Inspection - Specific lot control required?
- Pre-Control Chart to guide in-process inspection / adjustment decisions
- Define Final Inspection Requirements on the Control Plan?
- Receiving Inspection Techniques - What can we do to improve our current system?
- Internal Subcontractor Certification Program - Eliminate Receiving Inspection?
- Receiving Inspection: C of C for resins
- Validity of previous inspections when equipment is found out of calibration
- MIL-STD-1916 "Acceptance on Zero (AOZ) Sampling Inspection"
- Dimension Inspection - Results recorded on print - Seeking a better method
- Accuracy of 100% Visual Inspection - Proofs
- Part Approval - Eliminating Incoming Quality Inspection by Customer
- Product ID, Inspection and Test Status, - QS9000
- As9100 4.10 - Identification of production inspection instruments
- Developing a method of inspection (other than visual)
- 100% Inspection - 80% Accurate - Quote from Juran (?)
- CNC Machining Operations Sampling Plan
- Where I can find the grade requirement for an inspection plate
- Final Inspections - Does 100% inspection really work
- How can you deploy an MSA study on a visual inspection appearance variable
- ISO TR 10064-3 - Cylindrical gears - Code of inspection practice
- Procedure for Incoming Inspection of Adhesives including Shelf Life
- Recording Monitoring and Measuring Readings - Record inspection gages we use?
- 4.10.4 Final Inspection and Testing - Wondering what kind of methods you guys use
- Dimensional Inspection Business
- FMEA Issue - Consider all inspections that we have like a processes?
- Guidance for Developing Inspection and Test Criteria
- Changing Inspection Frequency on the Control Plan
- Laboratory Scope must include inspection stations out on the shop floor
- Finished Goods Testing - Using historical test data to prove finished goods OK
- How can we ship zero defectives? Zero Defects Sampling?
- Skip Lot Inspection - What do we look at and when?
- 8.2.3.1 Monitoring and measurement - Containment of product and 100% inspection
- In-Process Inspection Data?? How Much?
- Is a Control Plan Required for Receiving Inspection?
- Calibration of inspection, measuring and test equipment
- Lighting Requirements For Inspection - What output is required? Is there a standard?
- Visual Standard for watch industry
- Employee Owned Inspection Equipment
- Reduced Inspection & SPC
- AS9100 Clause 8.2.4.2 - First Article Inspection (FAI) - How do you comply?
- Job Shop Inspection and Test - Where should we establish inspections? Why?
- Product Audits must include raw material or incoming inspection process?
- Quality Records - How long do you keep inspection records and why?
- Inspection and Test Status for ISO 9001 - 'OK To Use' sticker?
- Accredited Persons Inspection Program - Third Party Inspection
- Zero Acceptance number procedure for Attribute Sampling
- The worth and effectiveness of Self-Inspection: Seeking Opinions
- Significant digits when reporting measurements
- Inspection & Test System - Evidence of conformity but no actual measurements
- GMP Inspection Requirements - Eliminating Visual status of finished goods
- Inspection & Test System for Distribution Centers
- MIL-STD-105D & MIL-STD-105E Differences
- Inspection and Detection - Kit to production - Need an inspection routine
- Internal Laboratory - Defining the Laboratory Scope - Inspection, Test, Calibration
- Product inspection specification sheet form - Examples needed
- QA Mechanical Inspection Supervisor - Columbia, Maryland
- Anyone have any experience setting up a Liquid Penetrant Test program?
- Do the inspection stages in flow chart also need to come out the FMEA?
- TS 16949 Section 8.2.4.1 - Layout inspection vs. QS-9000 Section 4.10.4.1
- What is the purpose of the AIAG's PPAP process? Elimination of customer inspection?
- Layout Inspection & Product inspection - Can We Eliminate Product Audit?
- ISO 9001:2000 Clauses 7.4.3 & 8.2.4 - Incoming inspection records - need your input
- Weld Destruct Test - Have any of you ever used this test?
- Current Receiving Inspection activities - Reviewing, revising and improving
- Probability of passing bad product - Air decay inspection
- Where I can buy Dodge-Romig Sampling Table?
- ASQ Inspection and Measurement Quality divisions conference September 2004
- Receiving Inspection Instructions for PCB's
- What if the inspector isn't inspecting? NASA inspector indicted
- Inspectors in a furniture manufacturer - How many quality assurance auditors
- Is the first piece inspection method supposed to be in the Control Plan?
- Process Control Plan and Inspection Plans - Receiving and final inspection required?
- Need to purchase ANSI/ASQ Z1.4 & 1.9 - Sampling Procedures and Tables - Inspection
- Dodge-Romig Sampling Inspection Tables - Seeking (possibly in Excel .xls?)
- Verify paper print to CAD file so we can use the CAD models for inspection purposes
- Inspection Room Environment - ASME standard which addresses environmental controls?
- Rework by Inspectors - Pros and cons of a quality inspector also doing rework?
- Determining the Appropriate Sample Size for Process Validation/Qualification
- 8.2.4.1 Layout inspection - When is a full layout required and how often?
- Operator Quality Certification - Visual Inspection - Very high customer return rate
- MIL-STD-105E & Continuous production sampling plan
- Receiving Inspection Procedure - Visual inspection defined
- Visual Inspection - How to maintain the same results?
- UK Inspection Manager UK - Metals and composites inspection
- Visual Inspection Variation - What can we do? Building slot machines
- Inspectors and Assemblers - How much can they handle?
- Airline Crew Misses an Inspection - Aircraft Door Falls Off
- Layout inspection content - Auditor said we should do an annual audit also
- Incoming Inspection trends? ANSI Z1.4 / Z1.9 - What is normal?
- Inspection: Looking for ways to check 10 x 20 foot "checking aid" mylars
- Effectiveness of Human Inspection - Reality vs. the 80% 'Rule of Thumb Acid Test'
- Receiving Inspection - What is the best way to handle the C of C's, test results, etc
- Sampling Plans - Inspection Levels I, II, III - I'm looking at ANSI/ASQ Z1.4-2003
- Worker self-inspection - I would like to implement a first pilot experience
- Annual Requirements - TS 16949 - 8.2.4.1 Layout inspection and functional testing
- Mil_STD 105E & ANSI/ASQC Z1.4 sampling Plan
- Has anyone heard of the Squeglia Zero (c=0) Acceptance Sampling Plan?
- Suitability of in-process automated inspection system - Stamping house
- Customer Test Driven Development - CTDD
- How effective is 100% inspection
- The essential criteria for inclusion in a test method
- Why Does a Thread Plug No Go Gage Mean Fail?
- Inspection Results - The FDA's interpretation of recording inspection results
- Inspection status, checksheet and evidence.
- Sampling Spreadsheet to help determine the sample size for sampling plans
- 105E/Z1.4 - How do you determine acceptance of an inspected lot?
- Is it necessary to take out a sample from delivery lot to save for 15 years?!
- Prototype Inspection - 100% Inspection on All Parts or just a Sample?
- sampling plan for medical devices (implants)
- Checking fixtures - How to build it and are its dimensions the same as the part?
- Acceptable Rejection Rates - Are there any industry standards or figures?
- Arriving at Sample sizes based on confidence levels
- Layout inspection - When is a layout inspection required?
- PCDMIS CMM Software from Brown and Sharpe - Your opinions?
- Open-Air CMM??? Open to the elements of the shop - Comments Appreciated
- Automotive Sampling Plans. HELP! Working on an Automotive process control plan
- Welding Inspection Work Instruction
- Precision/Tolerance Ratio for 1-sided Specification - How to Compute
- Sampling plan vs. test samples - All samples taken have to be tested to all specs?
- ANSI/ASQ Z1.4, Section 6.2 Nonconforming Units
- Asking for e-coat inspection plan
- Wheel seal testing facility needed
- Sample size selection to make sure 95% confidence detectability
- How do you explain sampling plans to management?
- Seeking Contract inspection service provider for in-house inspection - Arkansas
- I am looking for a US laboratory that can perform ISO 1628-4 testing
- Concentricity Measurement - How to correctly measure concentricity
- Recording Inspection Data - Best Practices - What do you folks do?
- No In-process or first piece inspection - Final Inspection ONLY! Am I wrong?
- Measuring Injection Molding Quality using Weight of final assembly
- What is the Effect of Temperature on OHM (resistance) test?
- Outside the box, or off the reservation? Applications for automated inspection
- Need help with Gage R&R method
- Outbound Shipping Quality - Package Contents Sampling Plan - 1,500 Packages an Hour
- How do part tolerance and gage tolerance interact?
- Mil-Std-105e - Average outgoing quality (AOQ) & Average outgoing quality level (AOQL)
- ISO 2895/3951 Switching Inspection Rules
- Choosing a Sampling plan for Start Up Fabless IC Company - Guarantee a 200 DPM limit
- Chain Hoist and Slings Inspection Sheet - Needed
- Confidence interval for % overuse in component lots
- Has anyone tested furniture to ANSI/BIFMA X5.1-2002 and what are your comments
- Incoming parts inspection in automotive industry
- Sampling plans and Cpk - Some way to calculate the sample quantity
- Sampling plan to detect defective units - Given N=6000, PPM=500
- Components "Commercial grade" vs "Automotive grade"
- Device tracking sampling plan for device tracking audits - Medical device industry
- ABS Signal Testing Dilemma
- Incoming Metal Coil Inspections - How many do you inspect?
- Sampling - Skip Lot - 20 ppm - What is your opinion of Skip Lot sampling?
- Can anyone help with ESD Protection (PCBA)? How is ESD generated?
- Sample Size for calls to be monitored? Call Center Customer Service Representative
- Sampling plan for lots smaller than 25
- Zero Acceptance Sampling Plan By N.L. Squeglia
- Sampling Inspection Plan - Cell phone distributor offering programming services
- Cost Estimate for how many hours to measure a part (Full first artcle)
- Ansi/ASQ Z1.4 C=0
- General appearance inspection standards for casegoods (wood)
- 100% Inspection Control Chart By Dr. Feigenbaum - SMT (Surface Mounting Technology)
- The best inspection tool for measuring cracks - Ceramic cylinder
- Can anyone tell how do we do inprocess inspection of raw materials
- Drawing (Print) Symbol - Need Help With
- Limits of size of defect that one can identify by simple visual inspection
- Independent Tests - Another operator or tester to do the final test?
- Automating variable inspection - Calipers, micrometers, and optical comparators
- Looking for a good mechanical inspection software package
- How to tell the difference between 303 and 316 Stainless Steel Bar Stock?
- Color Measurement - SP 60 Sphere Spectrophotometer - How do we input the L*a*b*
- Rubber Intial & Inspection Stamps - Valid or a violation of FDA quality guidelines?
- "N" and "C" diamond rockwell brales - Does anyone know how these are made?
- Doubt on Thread Measurement - Measuring Fluted (Odd) Taps for its pitch diameter
- Inspection 100% - Process continuos (Continuous Process)
- Zero Acceptance Sampling - Is anyone is actually using this?
- What tools and techniques are used in paper gaging?
- Surface Inspection solutions for Hot mills, Pickling lines, annealing lines
- Destructive Gauge R&R Sample Sizes - Does ANOVA work better for the analysis?
- Sampling Plan Sample Size Problem
- Converting torque to pressure - One for the Math Folks
- Machinery Acceptence Criteria Determination? Chemical Blending (Pharmaceutical Plant)
- Test requirements for sectional observation & temperature rise (wire harness)
- Streamlining incoming audit - 2 separate inspection processes
- Production duties vs. Final Acceptance Testing - New Quality Manager needs HELP!!!
- Test method validation on raw materials, intermediates and final device
- API REG Pin and Box Threading - Minimum Gages Needed - Thread, Plug and Ring gauges?
- Resolution question - Measuring a product on a CMM - the tolerance is .000/.001
- Test report requirements - Signature required? ISO 7176-19
- Where to buy non-slip pad or material or non slip balancing machine
- Explanation of Concentricity and Eccentricity
- How to convert angle measurement given in degree to degree/Minutes/Seconds?
- Conversion of surface finish measurements
- GD&T Dimensional Control Frames - How the tolerance is defined
- Determining Sample Size for Attribute Data
- Advice on maintaining surface plate condition - Starrett crystal pink surface plate
- Determining Receiving Inspection Sample Size
- Variable Measuring Tools for Measuring Centerline of Woodruff Slots in Shaft Work
- Sheet metal inspection - constrained or not constrained
- Detecting non-visible defects in machined brass - Where to start?
- Smart-labels that automatically monitor lapsed time - Sample and Testing Plans, Help!
- Residual Dirt Analysis - I have to create a Standard for Residual Dirt Analysis
- Gear / Spline Gaging - Both Internal and External Splines
- Sampling plan/method that accepts on ZERO defects
- Light Measurement Help - Work Instruction for Inspection of Powder Coated Surfaces
- Visual Inspection: Can Visual Inspectors be Evaluated?
- Measuring Weldnut Locations
- Cubing Tests - What Measurments Need to be Done?
- Label Inspection - How to Set Goals for Inspectors - Label Manufacturer
- CMM Probe Size Selection when doing a CMM Layout of a Part
- Final Inspection - Calibrated M&TE (Measurement and Test Equipment)?
- Certificate of Compliance for a Vendor (Supplier) - Looking for an example
- Inspection Check Fixtures for Blow Molded / Injection Molded Components
- Bidirectional True Position Tolerance Call-Out for Holes for Process Capability
- 100% Visual Inspection - Would you Remove or Reduce the Visual Inspection?
- Receiving Inspection Plan Sample Size - Measuring Mil-Std Rivets - Fasteners
- Implementing Operator Product Self-Inspection
- Finding Sample Size - Data Type is Attribute
- Sampling Plans - Can a company create its own Sampling Plan?
- Finding sample size by using confidence level and probability
- Books On Receiving Gauges
- Sampling plan for destructive test
- Green Channel Parts - No Receiving Inspection - Cable Harness Contract Manufacturer
- Is there a separate standard for dimensioning and tolerancing sheet metal work?
- How to work with Mil Std 105E OC curves?
- Writing Test and Inspection Procedures
- Inspecting Quality into Product - How to react?
- Surface Finish Tester Recommendations with both Ra and Rz (english and metric) scales
|
*Please be aware that SOME RECENT forum threads may not yet be indexed by Google. |
|
View Full Version : Inspection and Test, Sampling and Related Topics |
|