- How do I prepare for a recertification audit sch. 1 week after our division is sold.
- Tri-annual TS16949 continuous assessment (3 year cycle)
- Accepted / litigated AQLs in the Automotive Industry? Where is this defined?
- Predictive maintenance vs Preventive maintenance
- Does TS16949 Scope cover Service Parts?
- A Step by Step TS 16949 Implimentation Plan and Strategy - New Company
- New member of the TS 16949 family of registered companies
- Control Plan Compliance [PPAP 3.1] & Drop Shipments
- New developments in automotive - Effect of TS implementation in companies using Lean
- Requirement to control gauge and tooling drawings? TS16949 Clause 7.5.1.5
- Predictive Maintenance - Confused about what can be considered predictive maintenance
- Minor Nonconformance from AIAG Manual - Recommended actions field on our PFMEAs
- Do I need Flow Charts in TS16949?
- From the SMMT website: How many TS-16949 certificates have been issued?
- Improvement On Quality Management System
- Measureables to determine efficiency and effectiveness of the COP Processes
- Special Status Customer Notifications - Supplier Monitoring - ISO 16949 Par. 7.4.3.2
- Monitoring Premium Freight Charges
- Producing a supplier audit system for my TS 16949 organisation
- Validation of Procsses - How do I address TS 16949 Sec. 7.5.2.1
- Please review my Gap Analysis
- Can an OEM like Honda, GM, Ford can get TS 16949 certification?
- Where does the 16949 number in TS16949 come from? ISO Numbering System
- "COP" & "MP" & "SP" List request
- Predictive Maintenance Suggestions
- Looking for Possible Continuous Improvement initiatives for the CI Process?
- ISO/TS16949 Surveillance Audit Frequency
- Help translating abbreviations and acronyms from DDW to plain english?
- Skipping internal audits in internal laboratory
- Effectiveness and Efficiency - Process Objective Determination
- Help with Rules for achieving IATF recognition
- Gantt Chart for ISO/TS 16949 Implementation
- Have the OEMs issued an extension to suppliers if not TS registered?
- Quality System vs. Process vs. Product Audit - TS16949
- Multiple Work Orders at work station found during Internal Product Audit
- Example of an "Internal Audit Plan" - Format dispute with extrnal auditor
- Advertising your QMS registration
- Quality Requirements or a Supplier Quality Manual for Linamar
- March/April 2007 issue of AIAG actionline online for free
- Approved Supplier List for Transportation (Trucking) and other Services
- Would relocation to a bigger plant affect our TS 16949 certification?
- Understanding ISO/TS 16949 Clauses
- Resubmission of PSW required by customer because of part number change
- QA Engineer and Supervisor just left the company - ISO/TS 16949 implementation issue
- What are the current automotive semiconductor requirements?
- General SREA (Supplier Request for Engineering Approval) form for all OEM's?
- Asked by customer to supply Retrospective Capability Data
- TS16949 and implementing a statistical quality protocol.
- Specification Description - Product audit on the production floor
- ISO/TS 16949:2002, clause 1.2:Application
- Audit Days vs. Customer Base - Auditing all of our customers and their specifications
- Remote Support Functions - Sales offices
- 7.4.1 Purchasing Process Criteria for re-evaluation of suppliers
- Is R&D a value-added process?
- Eligibility of Tier 2 supplier of forged parts to get TS 16949:2002 certificate
- Octopus Diagram needed
- Quality Plan for manufactoring products - Example needed
- 100% delivery on time not fullfilled- is that nonconformance?
- Are media (electricity, water etc.) resources or inputs to a manufacturing process?
- Nissan asks about an Unusual Situations procedure
- New GM CSR (customer specific requirements) document
- Automotive Air Conditioner plant TS16949 Registration
- Auditor requires us to have a copy of 2nd Edition Certification Rules
- Help understanding the ISO/TS 16949 Clauses
- TS Certification Scope - Semiconductor subcontractor providing assembly and testing
- Summarise CSR? Boss asked me to design a template to summary the csr
- Supplier of Automatic Gaging Systems need to be on our Approved Supplier List?
- Records Required for ISO/TS 16949
- Triennial TS16949:2002 Assessment Date Rules
- Looking for a manufacturing process flow chart example
- Validation of processes for production/service provision - Clause 7.5.2
- "Characterization to the Corners" of the Process - Translation needed
- Minimum Requirements for TS 16949 Compliance
- No prevention modes were in place - Surveillance Audit Finding
- Auditing CSR (Customer Specific Requirements) during TS 16949 Audit...
- Do you need a supplier questionnaire for TS16949?
- Product Audit Process Requirements - Clause 8.2.2.3
- Customer Satisfaction - Customer satisfaction goal/objective less than 100%?
- Contingency Plans for Equipment Failure as a Separate Document
- Transition From ISO 9001:2000 to ISO/TS 16949
- What is 'sampling based on performance'? 7.4.3.1 Incoming Product Quality
- Interpretation of 7.3.4.1 Monitoring - Measurements at specified stages of design
- IATF Guidance to ISO/TS 16949:2002 - Not auditable?
- MSA (Measurement Systems Analysis) for Visual Standards?
- ISO/TS 16949 Gap Analysis Excel .xls Worksheet
- Does MMNA (Mitsubishi Motors Manufacturing of America) require ISO/TS certification?
- ISO 17025 Accredited Suppliers from a QMI TS16949 Auditors Perspective?
- Suppliers needing to be in "conformity with TS 16949" - Clause 7.4.1.2 - Questions
- Actual examples of FMEA (DFMEA, PFMEA) for Car Assembly Process
- ISO/TS 16949 certification questions
- TS 16949:2002 Standards
- QMS Performance Trends - Based on fixed or flexible periods - Clause 5.6.1.1
- GM Latest CSR - May 19, 2007 posted in IAOB
- Are regular reviews and updates of FMEA's Preventive Actions?
- Effect of Major and Minor NonConformances during Registration audit - TS 16949
- Is the Laboratory in HQ (Japan) considered an Internal Laboratory?
- Product Quality Certifcate types? (Certification by Lot)
- Would anyone have an example of an APQP flowchart?
- 7.5.1.1 - Controls vs. Methods for Monitoring of Control
- PPAP On-Time Tracking procedure wanted
- Specific requirements of the OEMs - GM, VW, end others.
- Is there a need to tie NC found during internal audit to relevant ISO clauses?
- Chrysler requirement of Initial Risk Evaluation
- Does the scope of TS 16949 include 'Trucks'
- New Special Process Guidelines are now available from AIAG
- ISO/TS 16949 Compliant Calibration Method - Laboratory Calibration Levels
- Revisions to CQI-9 - Does anyone know what the changes to CQI-9 are?
- What is the difference between ISO 9001:2000 and TS16949?
- TS16949 Consultancy - What should I expect from a TS16949 Consultant?
- New Auditor wants Mould tool repair bill included in Cost of Poor Quality!
- Too Deep? Applying APQP to a Major Component and to Suppliers
- Pre-Assessment Mock Audits by Different Consultants
- Definitive Understanding of 8.2.2.3 Manufacturing Process Audit
- Is APQP needed as a plating service provider?
- Where can I buy TS 16949 technical specs and manuals?
- Any TS 16949 requirements for Product termination?
- Facility Closing - Continue Surveillance Audits?
- TS 16949 Certification Only for Production Line
- Payment as Customer Oriented Process (COP)- Looking for audit checksheet.
- Does TS require WIs to have special characteristic symbol?
- How do you decide what is acceptable internal or external PPM number?
- AIAG Manual Master List with Current Revision Level
- Internal Audit Check Lists for GM, Ford, and DCX (TS Specifics)
- Does TS 16949 require us to have an internal laboratory?
- Just passed TS 16949 Stage 1 Assessment yesterday
- Is Selling Prototype Parts ok?
- TS Section 7.6.3.1 - In-House Testing - Opinions Please
- 8D (8 Disciplines) Problem Solving for TS16949 Audit Points
- TS16949 Certified - Our Company has been recommended!
- TS 16949 Audit - Examples of Major & Minor NC's and Observations for Stage 1&2 audit.
- How to Link Quality Management System, Manufacturing and Product Audits
- Where can I buy TS7-K Supplier Quality Requirements QS 7 Pack?
- Including Internal Metrics in the Calculation of Customer Satisfaction Index (CSI).
- What is Required of Me to Satisfy the NSF Auditor? TS16949 Internal Audits
- What Documents have to be Controlled?
- How to Compute "Inventory Turn Over Time" - TS 16949 Clause 7.5.5.1
- Invoice Payment Procedure wanted
- ISO/TS16949 Internal Calibration Lab need to include Production Equipments
- The New CQI 11 or 12 Annual Assessment for Plating & Coatings Requirement
- Manufacturing Process Audits (TS16949) - are Turtle diagrams really helpful?
- Guidance List for Control Methods in Control Plans?
- Controlling Continuously Changing Forms
- TS16949 - Company with only 5% sales to Automotive. What to do?
- How To Include Substance of Concern (SOC) Free Into TS16949 Internal Audit Plan
- QMS International - Approval body. Accredited Or not?
- Extra Cost for ISO/TS 16949 in Tooling Cost Break Down
- CQI-11 & CQI-12 Definition of Special Process Scope
- TS16949 Maintenance Objectives and Machine Downtime
- How to Establish a TS 16949 QMS in an ISO 9001 Registered Company?
- Does TS 16949 Clause 7.5.3 require our product to have traceability?
- Must 'SoC free' test be carried out by the third party labs (such as Intertek,etc)?
- Are Traders classified as Suppliers in TS 16949?
- Evidence of Scrap Rework - What is needed?
- Implementing SPC in Accordance to the Requirements of TS 169494.
- TS 16949 vs. VDA 6.2 Comparison Matrix?
- Combining Several Systems into One - ISO9001 + ISO14001 + OHSAS18001 (etc)
- Monitoring and Measurement of Finished Goods with a Better Method
- Where can I find the most up-to-date and current engineering standards?
- How can we satisfy TS 16949 clause 4.2.3.1 Engineering Specifications
- Measurement of Visual Inspector Efficiency and Effectiveness
- Quality Guarantee Plan - Flow Chart from Incoming Material to be F/G
- Automated Engineering Specification Change Notifications?
- Must Quality Incoming fill the checksheet for checking the Supplier part, In ISO TS?
- What sort of information can I furnish for a Level 2 PPAP?
- TS 16949 Clause 7.4.1.2 – Is my understanding correct?
- Supplier Change And Customer Notification
- Gauge R&R Studies Bad, but Process has a Cmk of over 7
- IATF Requirements for Registration Scope
- Delphi CSR (Customer Specific Requirements) and LPAs (Layered Process Audit)
- High COPQ (Cost Of Poor Quality) from Our Quality Department
- TS16949 Gap Analysis form or checklist needed
- Upgrading ISO 9001 to TS 16949 - Plastic injection molding company
- ISO/TS 16949 Questions About clause 7.1.2. Attribute Data Sampling
- Why do we now have to do a PSA to either CQI-11 or 12
- Supplier Dispute Procedure - parts on hold not yet replaced
- Ford India has ISO/TS 16949
- Objectives, Targets and KPI for COP, Support and Management Processes
- Rejects due to material during processing - is it an in-Process or Material reject?
- Upgrading to TS 16949 - A Management Overview and Kickoff Document
- TS 16949 and Control Plans - Need Tier II/III follow AIAG Annex A Format?
- Customer Specifics Matrix suggested by TS 16949 Auditor
- How to measure internal auditees' performance during customer audits?
- Organizational Chart Requirement in TS16949?
- TS16949 Implementation - Can one implement TS 16949 without being ISO 9001 first?
- My manager wants me to be the company "TS16949 Expert"
- Linking Quality Plan Objectives to the Business Plan?
- TS16949 Clause 7.1 in plastic pellet 'color mixing' and color compounding' process
- Getting Employees Ready for TS 16949 Registration Audit - Training Materials
- Improving your suppliers to work according to ISO/TS
- Writing FMEA's for Safety - Ideas and Examples
- Manufacturing vs. Production - Differences
- Does TS still apply for Chrysler and Daimler
- Can my organization use Core Tools that are not the Most Current Revision?
- What is 'Direct Run First Time Quality Result' - IATF Guide, Para 7.4.3.2?
- TS 16949 Clause 7.4.3.2 - Help with Delivered Product Quality
- TS Clause 7.6.3.2 - Can Non-Accreditated External Laboratory Carry out Calibration?
- Elements Of Manufacturing - New Chysler Requirement
- Temperature Control in a Laboratory with CMM and other delicate instruments
- Customer is also my supplier - Should I perform an audit to his process?
- TS 16949 clause 5.5.2.1 Customer Representative Responsibilities?
- Corporate "Letter of Conformance to TS 16949" - New Startup Plant
- Process Measures for Every Process - TS 16949 Clause 5.1.1
- Are Customer Specific Requirements negotiable?
- Anybody have any presentation example per TS16949?
- No Actual Field Failures (5 years) - Still need Analysis of Potential Field Failures?
- Section 7.3.4.1, a part of Management Review?
- Hierarchy of TS 16949 Requirements within an Organization
- TS 16949 is a way of Eliminating each of your Customers Auditing you - Need to Vent
- Changing the Registration Scope - No More Automotive Products - TS 16949
- No Automotive Product now - Cancel TS? What if we get new business later?
- Preventive Maintenance for Assembly Line Bar-Code & General Printers - Necessary?
- Laboratory is accredited to ISO/IEC 17025 but that is not stated on the Cal Cert
- TS 16949 Status Report? List of CSR's? 3rd Rev. in October?
- Customer Disruptions including Field Returns - TS 16949 Clause 8.2.1.1
- TS 6.3.1 Plant, facility and equipment - Methods to evaluate effectiveness of existin
- Sample Approval by Customer - Customer doesn't send/return their approval
- True Position Question - What does this print callout mean?
- TS 16949 - Compliance Only for Automotive Customers
- Internal PPAP Audit - What should I ask? Plastic parts (automotive) TS 16949
- Last-off-part comparison used to validate the set-up (TS16949 Clause 7.5.1.3)
- AIAG SPC Manual (ver.1) Interpretations related to Gage R&R (GR&R) and MSA
- Gage Block Measurement - Home made gage blocks at 1" intervals
- "Special Production Process" Validation and TS16949 Clause 7.5.2.1
- Gage R&R Study - Appropriate sample collection and size for a Gage R&R Study
- What kind of documents shall be prepared by a Multidisciplinary approach?
- Gage Manufacturer's Certificate and Accreditation.
- TS Requirements for Warehouses - We store customer owned shipping containers
- Do you need to re-PPAP when moving a Job?
- New Plant Startup: What is Required???
- Capability in ISO/TS 16949 registered firms - No Special Characteristics
- Can I have two raw material suppliers for one type raw material in one PPAP?
- CQI-9 - Heat Treatment standard for Automotive Sector
- TS 16949 Cl 7.2.2 - Review the Requirement Related to the Product
- GM Controlled Shipping Level 1 - Are you required to contact the TS 16949 Registrar?
- Formal CS1 Notification Letter Ideas and/or Template needed
- Guideline to Standardize the Transp. Damage Claim Process for Finished Veh.
- Relationship and Differences between ISO 16949 and ISO 15504 (SPICE)
- The 5 Mile Rule - Is it fact or fiction?
- Control Of Documents - Recommended specification by our supplier
- Free - ELV 'Compliance Connect' Tool from AIAG
- Drop Test - Automotive components
- Is Kappa Study Required during PPAP (Production Part Approval Process)?
- Quick Reference for the 8 Quality Management Principles in ISO 9000
- Customer Documents - TS 16949:2002 Clause 7.2.3.1 Interpretation
- TS 16949 Control Of Documents - Operator Instructions
- Aiag E-documents - AIAG publications in electronic format
- General Motors QSB (Quality System Basics) - Standard work instructions
- Who is responsible for quality of the company (Internal ppm) - Quality or Production?
- Automotive Navigation Software - TS 16949
- Layout Inspection - Sound systems to a German car manufacturer
|
|
View Full Version : ISO/TS 16949 - International Automotive Quality Systems Standard |
|