- Automotive and non automotive - 2 systems?
- TR 16949 - BSI Projectline Database
- Existing TR16949 Threads
- "Release" of TR16949
- AIAG release of TR 16949
- How is everyone coming along with ISO/TS 16949 implimentation?
- TS 16949 becoming automotive standard of choice
- AIAG Rollout meeting - ISO16949
- GM and TS 16949
- Prices for Standards
- TS 16949 will replace QS-9000?
- What is ISO/TS 16949?
- Smithers - TS 16949 Registrar
- letters of non-US clients
- Will TS 16949 be aligned to ISO 9000:2000 in the future?
- TS 16949 Transition - Easy? Changed Auditor Requirements?
- Explain the ISO organization's numbering system
- Survey Audit Days (Mandays) - TS 16949
- Is TS 16949 thinner (less paper) than QS-9000?
- TR &TS 16949
- 4.10.6 - Calibration services are conducted by a supplier's laboratory
- Business Plan Requirements - 4.1.1.2 Scope of quality objectives in the business plan
- 4.2.4.2 Measurements at appropriate stages of product realization
- Review Cycle
- Tools & Techniques
- Review-supplemental
- TS 16949 Certification Audit and Results Discussion
- TS16949 OVERVIEW
- TS 16949 - What are the New Requirements?
- Tooling management - Drawing change control for tool and die drawings
- Will TS16949 supersede QS-9000? Is QS-9000 Dead Meat?
- How does ISO/TS 16949 differ from QS-9000?
- TS 16949 Lead Auditor Training Requirements
- Entela Registers Clarion to TS 16949
- Transition-Support.com's Website - TS 16949 Information
- Registration Scheme/Customer Specifics
- Fiat will require ISO/TS16949
- TS16949 / ISO14001 Training - Recommendations
- ISO/TS 16949 & European Standards
- Accreditation Requirements - Facility laboratory either on-site or remote location
- Procedure for ISO/TS 16949 Clause 4.1.7 Impact on Society
- TS16949 & QS-9000 Gap Analysis
- ISO 9001 certiication
- Should we move from QS-9000 to ISO / TS 16949 Registration?
- ISO/TS 16949 vs. QS 9000 - Comparison of the two standards
- New Facility - 6 to 12 Months Before We're Allowed to Register?
- TS16949 Overview
- Differences / deltas between ISO/TS 16949 and QS-9000
- TS 16949 Revision to ISO 9000:2000 Alignment
- TUV Receives 16949 Accreditation
- Is "Employee Satisfaction" referring to satisfaction with the quality system
- 4.1.7 - Impact on Society
- Gap Analysis comparing QS-9000 and TS 16949
- ISO/DIS TS16949:2002
- TS 16949 - Quality Plan Requirements in 4.2.3.2
- TS or QS ??????
- Registration to TS16949
- why 16949 ?
- TS16949 upraging Vs ISO9001:2000
- From QS-9000 to ISO/TS 16949 and ISO 9001:2000
- TS 16949 for Equipment Manufacturers?
- Latest Revision of TS16949
- Transition from QS 9000 to TS 16949
- Has whole group to be TS16949 certified?
- List of TS16949 certified companies
- ISO/TS 16949 and ISO 14001
- ISO/TS 16949 Second Edition - The Latest Scoop!
- How Many Companies Are TS 16949 Registered?
- Location of Work Instructions and Cost of Poor Quality - TS 16949
- 7.4.1.2 of the 'Latest' TS 'Comments' Draft
- Section 6.2.2.4 - Employee Motivation and Empowerment
- Where Did the Number 16949 Come From?
- First Draft of TS 16949
- ISO TS 16949:2002 Information Resources
- How To Select Regulatory (Regulatory Requirements?) For Implement Iso/ts 16949
- ISO / TS 16949 Draft "Disapproved"? December 2001 US TAG ISO/TC 176
- TS Customer Specific Requirements
- TS 16949 - But - No 'Big Three' Customers
- Maintaining manufactoring process capability
- QS/TS Suppplier Stuff
- Is TS 16949 Replacing QS-9000?
- Registration scheme
- TS 16949 vs. QS-9000 Cross Reference Matrix
- ISO9001 vs. TS16949 - Do we still need to use PPAP, APQP, etc?
- When Buying Standards, Shop Around
- Requirements of 16949
- Final Product Audits - What happened to QS-9000 Clause 4.10.4.2?
- Comparison List
- TS-16949 Rollout Workshop - April 2002
- TS 16949 - Who does this thing apply to? Raw material suppliers (steel)?
- ISO TS 16949:2002 - Sanctioned interpretations on the new requirements yet?
- The new ISO TS16949:2002
- TS 16949:2002 qualified auditors
- Grace Period - QS and TS Surveillance Audits
- Validation of Processes for Injection Moulding - Special Process? Clause 7.5.2
- 16949:2002 Checklist
- Who has TS 16949?
- Seeking: TS 16949 'Electronic' Check List
- Auditor's Qualification course as per Second Edition of TS 16949
- Validation of Processess
- TS16949:2002 Versus TS16949:1999
- TS 16949 - What I find confusing are the chapters headed ".... supplemental"
- TS 16949 Implementation - Have a question on defining processes
- ISO/TS 16949:2002 Documentation Structure
- TS 16949 Audits - Manufacturing Process (8.2.2.2) - Product (8.2.2.3)
- Seeking Example of a TS 16949 Quality Policy
- 7.6 Control of Monitoring and Measuring Devices
- Chrysler to mandate 16949
- Frequency of self control and costs - Justification for 4 Hours vs. Every Hour
- Audit Checklists: Quality Management System - Manufacturing Process - Product
- TS 16949 - 6.3 Infrastructure and 6.4 Work Environment
- 7.2. Customer-related processes
- Manufacturing Process Changes (7.1.4)
- TS Auditor
- TS16949:2002 checklist - MS Word .doc Document attached
- Confused about the TS 16949 Deadline - Presumably a Big 3 mandate?
- Auditing in USA vs the world
- TS 16949 - 5.4 Planning, 7.1 Planning of product realization, 7.5.1.1 Control Plan
- Purchasing Procedure - Purchasing process is not complete until product is received?
- TS 16949 and Process oriented auditing
- Cost of Poor Quality (COPQ) - What are the TS 16949 Requirements
- TS16949 and APQP - Does anyone have a cross reference from APQP to TS16949 clauses?
- Ts 16949:2002 Checklist
- Corrective Action Time Line When Responding to a Major from a Registrar
- Laboratory Requirements (7.6.3.1)
- Corrective Actions - ISO 9001:2000 vs. QS-9000 Clause 4.14
- Risk Analysis 7.2.2.2 - How is Risk Analysis defined by auditors?
- QS-9000 vs. ISO 9001:2000 vs. TS 16949
- 8.1.2 Knowledge of basic statistical concepts
- Does anybody have any idea about EAQF94 standards?
- TS 16949 and its HR Implications - Job Descriptions? Competencies?
- 7.6. Laboratory requirements
- TS 16949 - 6.2.2.4 Employee motivation & empowerment. Can somebody provide me example
- Product Realization - What does Product Realization mean in terms I can explain?
- What plans do you have to do?
- TS 16949 Clause 4.2.2 c - Interaction of Processes - What does this mean?
- TS for only “some” Customers
- standard ISO/TS 16949 -2002 Guidance supplement?
- Continual Improvement of Production Processes - TS 16949
- What is a Desk Audit? What should I expect? A Document Review?
- PPAP - When to Send a PSW Warrant
- 7.5.5.1 Storage and Inventory - We don't use FIFO for everything - How can we comply?
- Identification by Sticker - Returned Product Identification Problem
- Nonconforming Product - Report for each product we find with a nonconformance?
- 25th September 2002 - We were recommended for ISO / TS 16949:2002 Certification
- APQP as part of MPD
- Scope of TS standard
- Special Characteristics Symbols in The Control Plan
- Qualified for TS16949?
- TS 16949 Clear Choice For Automotive Suppliers
- Has Toyota Approved ISO / TS 16949?
- Working with the Big Three
- Good metallurgical website ?
- Timely Review of Engineering Specifications - 4.2.3.1 - Two Weeks?
- Distributors cannot convert to TS?
- Prioritized Reduction Plan & Kaizen
- How do I start implementing TS 16949?
- Special Characteristics Monitoring Requirements
- 7.4.3.2 - Special Status Customer Notifications
- 7.5.3 Identification and Traceability vs. 7.5.3.1 Id and Traceability - Supplemental
- Final drop dead registration date for automotive suppliers
- Difference Between Tier 1, 2, and 3 Suppliers
- How Can I Improve Our Company's Corrective Action System?
- Must Tier 2 Suppliers register to TS 16949?
- Some Suppliers to TS 16949 companies told they cannot register to TS 16949
- IM&TE - Outside calibration companies - 7.6.3.2 External Laboratory
- A 16949 Database of Registered Companies
- Seeking: ISO 9001:2000 & TS 16949 Gap Analysis
- Seeking advice about what I have to do before we're ready for a certification audit
- Can a "Two Wheeler" Manufacturer Supplier Register?
- TS16949 promotional items
- TS 16949 Clause 5.5.2.1 Customer Representative - What do you do to comply?
- TS-16949 4.2.2c - Example COP for a machining facility
- TS16949 registration for non-automotive suppliers
- Where I can find the number of companies registered to TS 16949 World Wide?
- To be or not to be TS16949?
- ISO/TS 16949:2002 Employee Training
- Objectives of manufacturing - 8.2.3.1 Monitoring and measurement of processes
- What is the structure of the TS 16949:2002 Manual?
- ISO/TS 16949 - What is the meaning behind this number?
- We have to have a written request from an automotive customer requiring us to certify
- Please Review My Quality Policy
- Knowledge of basic statistical concepts - TS 16949 Clause 8.1.2
- Do I have to have the 'References' section on a Work Instruction?
- QS92k Section II- what is the ISO/TS equivalent?
- Lots of products - need CP's
- Customer Letter Asking for TS 16949
- TS 16949 Cost Benefit Analysis
- Number of Companies registered to ISO 900:2000 and TS 16949
- ISO/TS 16949:2002 Quality Manual and Procedures
- TS16949 Interpertation
- TS 16949 and non automotive products
- TS 16949 - QS 9000 comparison cross reference matrix
- How to convince to Top Management to support TS 16949 Implementation
- Storage & Inventory - Our product has no shelf life
- TS 16949 Lead Auditor Course vs. Qualifications
- What element from QS that is no longer in TS?
- TS 16949 Clause 7.2.2.2 - Risk Analysis Requirements Explaination
- TS 16949 vs QS-9000 Lead Auditor Training
- TS 16949 Clause 8.2.4.2 - Appearance Items require special controls
- COP (Customer Oriented Process) for Market Analysis
- TS 16969 8.2.3 Does Monitoring & Measurement of Processes include Support Functions?
- 7.5.2.1 Process Validation - Supplemental - What does it mean?
- What is diagnostic guidelines refered in 7.3.3.1
- Statutory Requirements - 7.3.2 - Applicable statutory and regulatory requirements
- AIAG Quality QuickBytes
- TS 16949 Sanctioned Interpretations yet?
- Can TS 16949 certificate include ISO 9001:2000
- GM Cust. Specific Reqt's. More than one version?
- Appearance Items
- Field Returns - 6.3.2 s - Contingency plans to satisfy customer requirements
- 7.3.2.1 - Maintainability???
- Seeking Company to Benchmark With
- Where can I buy the TS 16949 standard? The AIAG is expensive!
- ISO/TS 16949 Lead Auditor Training - Suppliers of
- Process Identification Spreadsheet - Free from AIAG
- Audit - Zero Nonconformance Requirement
- TS 16949 7.5.3 Identification and traceability
- Audit of off line sites such as Sales offices by 3rd Party Assessor
- Successful TS 16949:2000 Registration Audit
- To 17025 or to 7.6.3.1?
- Help with Process Flow Diagram - Please Review Mine!
- TS 16949 Lead Auditor Training Providers
- TS 16949 vs. QS-9000 Audit Differences
- TS 16949 Clause 4.2.3.1 - Customer Print Revisions
- ISIR (Initial Sample Inspection Report) vs. PSW (Part Sample Warrant)
- TS 16949 Clause 7.5.1.1 - Control Plan - Control Plans required for ALL processes?
- ISO 9000:2000 to TS 16949:2000 Gap Assessment Tool
- TS 16949 - 7.5.2 - Process Validation - Criteria for review and approval of processes
- Starting Fresh or Keeping your QS procedures?
- Manufacturers, Distributors and QMS development
- Identifying Business System Processes
- TS 16949 - Separate Site Registration
- 8.2.4.2 Appearance items
- Control of External Documents - Which documents are required to be controlled?
- Color Acuity Testing - What types are available? Are there different tests?
- TS 16949 vs. QS-9000 Comparison - Gap analysis attached
- Release of AIAG's CQI-7: ISO/TS 16949 Implementation Guide
- Using an "operator copy" of control plan?
- TS 16949 Clause 8.2.2.3 - Product Audit Frequency
- Required Upgrade to ISO/TS 16949:2002
- TS 16949 Clause 6.2.2.4 - Employee Motivation and Empowerment Procedure
- The IAOB's TS 16949:2000 FAQ has been Updated
- IAOB Sanctioned Interpretations - Duplications/contradictions - TS update/interps?
- Opinions from Successful Registrations???
- TS 16949 - Where did the 16949 come from?
- ISO14001 and TS16949 "compatibility" versus audit day requirements
- 7.3 Exclusion Question
- Defining Process Changes and Customer Notification Requirements
- TS 16949 Clause 4.2.3.1 Engineering Specifications - Anyone have comments?





