The Elsmar Cove Discussion Forums > Aerospace and Aviation Requirements > AS9100 Aerospace Standard and Requirements

Pages : [1] 2

1. Adding AS9000 to ISO 9001 and QS9000
2. AS9100 Released into the wild
3. AS9100 Supersedes AS9000 - November 1, 1999
4. Teeth for AS9100 - Third party registration requirements
5. Boeing Imposing AS9100 QMS
6. AS 9100 Standard: What is it - Need Information
7. Following AS9102 for FAI Requirements - Does EVERY Component Need Its Own FAI?
8. As9100-2001 - AEROSPACE Quality Management Standard
9. AS9100 Auditor Certification Requirements
10. Difference between AS9000 and AS9100
11. Scope of approval portion of AS9100 section 4.6, 04 (AS 9101, sec 4.6.2, Q4)
12. Boeing 'Strongly Urges' Suppliers to become AS9100 Registered
13. AS9100A - Production Equipment, etc...
14. AS9003 Clause 4.20.2 - Customer-approved acceptance sampling plan
15. AS9100 A - Small aerospace company - What section do I follow?
16. List of AS 9100 Registered Aerospace Companies
17. AS9100 4.9 Process Control - Specify process documents and their revision levels
18. AS9100 related documents
19. AS9100 and the VERY small business
20. AS9100 vs. ISO 9001:2000 - How closely aligned is AS9100 to ISO9001:2000
21. AS/EN/SJAC AS9120 - Aerospace Requirements for Stockist Distributors - Now available
22. What do the standards D1-9000 and AS9100 refer to?
23. United Technologies Aerospace OEM Mandating AS9100 Certification by June 30, 2004
24. ISO9001:2000 vs. TS16949 vs. AS9100 - What are the Differences?
25. AS9100 Revision A - Timely and effective corrective actions not achieved
26. Is the SAE's AS9100 an International standard? vs. AECMA (EN 9100) - JISQ9100 (Japan)
27. AS 9001 Related Documents
28. AS9100A audit - Is Scoring being used?
29. AS9100 Verification of purchases - Metals stockist buying directly from mills
30. AS 9100a Clause 7.4.3 - Verificaton Of C of C (Certificate of Compliance)
31. AS9100B - 2004-01 - Has been issued. AS9100B is AS9100A less Part 2
32. AS 9100 B Interpretation for Multiple Manufacturing Streams
33. AS-9100 revision A Question: What is a clause?
34. QS para 4.6.2.1 and SI para C9: D1-9000 and AS-9100 NOT acceptable?
35. AS9100A Documentation Control
36. AS9003 flowdown to suppliers - Use of Mil-I-45208 in our quality clauses
37. AS9100 Article - Shameless self promotion
38. EN/AS9100 vs. EN/AS9120 - Can we be both? EN/AS9100 Requirements Exceed EN/AS9120?
39. OASIS Database at a per-entry cost of $500 - SAE Money Grubbers (AS9100)
40. AS9100 internal auditors - Accredited training required?
41. AS9102 Part Revision Change Levels
42. OASIS Database Search - Top 20 AS91X0 registration certificates - CRB's
43. AS9100 Para 7.5.1.3 Maintained according to documented procedures...
44. AS9100 Internal Audit Schedule - Seeking Example
45. EN 9100 - interpretation of additional requirements
46. AS9100 vs. AECMA vs. Oasis (Online Aerospace Supplier Information System)
47. AS9100 procedures and format - Several questions
48. AS9100 in Plain English vs. FAR145, ECAR145 - Seeking Cross Reference Matrix
49. Anyone Hear about a recent AS Mandate Letter from UTC and Boeing?
50. Is anyone familiar with PRI - Nadcap?
51. AS9003 vs. AS9100 - Are the requirements of AS9003 included in AS9100?
52. AS9102 FAI acceptance - Currently having issues getting prompt approvals
53. Part 145 Repair Station Rating and Capability List vs. ISO 9001 certificate Scope
54. Aeronautical regulations JAR145, JAR21G - Aircraft ground handling
55. AS9102 - Do I have to do FAI for all Standard Catalog Hardware items????
56. AS9102 section 3 - Who can explain what ''standard catalog hardware '' means
57. Part 145 Repair Station - Accountable Manager
58. AS9100 - 7.2 Contract Review - How others do Contract Review in a documented fashion
59. Raw Material Storage - AS9100 Requirements for 'Securing' Bar Stock Steel
60. What is FRACAS? Failure Reporting Analysis and Corrective Action System
61. AS9100B - 4.3 Configuration Management - What do I do?
62. Deployment of AS9110 - What are your thoughts?
63. Customer wants to invoke AS9103 on one time buy of 25 piece order.
64. AS9003 - An Aerospace Standard Based on Inspection & Test
65. QMI White Paper, RE: AS9100
66. IAQG - International Aerospace Quality Group - For what is going on in Aerospace
67. Separation of Facilities - Part 145 Repair Station
68. Excluding Design - Would like to go straight to AS9100 for the Aerospace Industry
69. Quality Accreditation for Scanning Bureau
70. AS9100 & Related Aerospace Standards - List
71. AS9100:2004 Checklist needed
72. Grave 'aide memoire' from a Cockpit Voice Recording (CVR) transcript
73. IPC/EIA J-STD 001 to 004 for Solder Specification
74. Seeking An example of how to implement AS9100 in a company
75. Failure to measure conformity of product
76. AIR5493, AIR5359, AAQG Training requirements for AS9100 internal auditors
77. Which topics of AS9100 the auditors (UK) are most focussed on
78. Which OEM's require suppliers to become 3rd party certified to 9100 series
79. Hoeyster QM - Goal: Eliminate "Final Inspection" - Aerospace precision machining
80. Novice quality manager trying to get AS9100 certification
81. To be or not to be AS 9100? Non-aircraft equipment suppliers
82. We Passed our AS9100 registration audit
83. New to aerospace quality and would like advice about FAIR requirements
84. C of C Liability - Person who signs a certificate of conformance
85. Web based AS9102 and 9103 compliance tools
86. List of 121 Air Carriers in Michigan that need the services of a 145 Repair Station
87. 7.5.2 Validaton of processes for production and service provision
88. NASA encourages AS9100/9110/9120 certification
89. Planning of product realization EN 9100 Clause 7.1 e
90. Verification of purchased product - EN 9100 7.4.3
91. EN 9100 7.5.1.4 Control of work transferred outside the organization's facilities
92. EN 9100 7.5.1.5 Control of service operations
93. Is it really useful to implement EN 9100 in small companies (3 people)?
94. Does AS9100 have "special" retention times for any items?
95. 8.2.4.2 First Article Inspection - No customers require them (yet) - AS9100 Audit
96. AS9100 - Would like to know if I can exclude the design
97. Passed AS9100 certification audit!
98. 8.2.4 ... person(s) authorizing release of product - Who could this person be?
99. Interpreting "Design" and development - AS9100B Section 7.3
100. Seeking AS9001 standard (Australia's ISO 9001) - Does anyone of you have?
101. Documentation Audit & Preassessment
102. Looking for example of Foreign Object Damage procedure - Aerospace industry
103. AS9102 Section 5.3 - FAI anytime a machinist tweaks a CNC program?
104. Saving and Control of CMM (Coordinate Measurement Machine) Printouts
105. Recommended for AS9100 B Certification
106. Can anyone explain the extra requirements of AS9120 vs. AS9100?
107. AS 9110 Accreditation - Can anyone tell me what to expect?
108. AS9100 Contract Review - Can the Sales Manager be the process owner?
109. FAR 145 AS9100 Gap Analysis - Any recommendations on where to start?
110. Control of Nonconforming product, Clause 8.3 - Audit finding - No Procedure
111. Preventive Maintenance - Does anyone have a sample of a PM procedure?
112. AS9100 site specific certification question - Software company
113. We passed our ISO9001 and ISO/TS16949:2002 renewal December 2005
114. How can electronic components be rendered physically "un-usable" when Nonconforming
115. Gas Turbines - Looking out for some data on Gas Turbines
116. Registration Rules - Are there any special rules for AS9100 as there are are for TS?
117. AS9100 surveillance audit success
118. AS9100/AS9006 process documentation - Aerospace software consulting company
119. ISO9001 / AS9100 Small Aerospace company - Tasked to get company certified
120. First Article planning - Is an FAI timeline for the product the same thing?
121. Free CATIA training online, is there any?
122. Certificate of Conformance/Compliance (CofC) - Share your best business practices
123. AS9100 - 4.3 Configuration Management - Regulatory impositions
124. Qualification testing of new products - Is there a MIL-STD or ANSI standard?
125. What will change in AS9100 Revision C?
126. Producibility Plan for Lockheed Martin - Seeking example
127. Need Assistance in understanding AS9100 Rev.B
128. Boeing Letter Re: AS9003 and ICOP - D6-82479, Boeing Quality Management System (BQMS)
129. AS9110 - Paper/article by Sidney Vianna - Your comments?
130. Periodic validation of raw material test reports (7.4.3)
131. Should Quality Policy be marketing oriented? Contracting firm for aerospace software
132. What are the Mandatory Records required by AS9100b Clause 4.2.3 / 4.2.4
133. AS9100 - 6.2.2 - Effectiveness of training?
134. What is the difference if I use AS9100 instead of OHSAS 18001?
135. First Article Inspection Required? AS9100 Clause 8.2.4.2 - Lubricant manufacturer
136. Controlling the records of suppliers - AS9100 Rev B Clause 4.2.4
137. Magnetic or penetrant Flawdetection: Requirements of identification w/ letter M or P
138. Still Confused About "Controlling Suppliers Records"
139. Contract Review Procedures
140. Documents required for certification process - AS/EN/JISQ9100
141. NADCAP AC 7004 Rev. D, Effective 9/11/2006 - Checklist has been revised
142. EN AS 9100 Permissible Exclusion and Provision - Aerospace design and development
143. Mandatory Procedures for Aerospace Services Organization - AS9100
144. E Book for EN AS 9100 - Seeking recommendations
145. AS9003 becoming obsolete as early as 2008???
146. ISO 10007 Standard for Configuration Management
147. BS EN 9100:2003 (AS9100 - Aerospace) vs. ISO 9001:2000
148. Implementing an AS9100 Quality System
149. Showing the Effectiveness of the Internal Audit Process System - AS9100B Clause 8.2.2
150. Does Anyone have a copy of Boeing's D1-9000?
151. Purchase Order (PO) Quality Clauses - AS9100 7.4.2 Purchasing Information
152. Application of Configuration Control for Service Laboratory
153. Do we need ISO 9001 certification if we get AS9100b certified?
154. AS9110 Requirement - Who requires the AS9110 standard?
155. AS9100 Internal Auditor Training Recommendations
156. AS9101B Checklist for AS 9100 Standard
157. In search of AS9100 Presentation for Internal Training
158. Mandatory Procedures as per EN AS 9100 standard
159. AS9100 vs. QS9000 vs. ISO-TS16949 - Similarities and Differences
160. AS 9100 - Initial Phase Audit - Certified with Majors or Minors?
161. Control of Nonconforming Product - Seeking Information and Example Procedure
162. Design and Development Activities Flow - Please Critique
163. Supplier Quality Requirements on Civil Programmes
164. AS9100 Certification and the Cost of Doing Business
165. Is anyone using a commercial Configuration Management Software for AS9100?
166. Is AS9100 Technically Obsolete?
167. Control of Non Conforming Product Procedure
168. NADCAP Standard - What is NADCAP and its Requirements?
169. FAR Part 145.161(a)(4) - Summary of Employment
170. 1st Article Part - Recording All Dimensions vs. Critical Dimensions - AS9100B
171. When do the requirements of AS9102 come into play? First Article
172. Consultant and Certification body recommendations for AS 9100 in Chennai, India
173. AS9102 Training - Does anyone have a good AS9102 training presentation
174. AS9100 Webinar - What should be the content?
175. Improving Aerospace Auditing Skills
176. Upgrading from ISO9001:2000 to AS9120 - Difficulties?
177. Audit Segregation by Product - ISO 9001 & AS 9100 in a small machine (job) shop
178. Supplier Reviews and Setting Levels of Supplier Control
179. Positive Recall - How it should work in a small job shop - 7.4.3
180. Requirements of Inspection Documentation in AS9100 - Mini-FAI - 8.2.4.1
181. Looking for AS9102 On-Line or Third Party First Article Training "Help Sidney"
182. AS9100 Certified Auditor needed for December 2006 Audits
183. ISO9000.3:2004 vs. AS9100 - What are the Differences?
184. AS9103 Process Control Plan - MS Word .doc File Forms attached
185. Applicability of AS9100 to Aircraft Ground Support Equipment
186. Certification Form (C of C) - Must CofC forms be numbered and controlled?
187. Identification and Traceablity - Audit Query - AS9100 REV B - Clause 7.5.3
188. 1000 Thank You's!
189. Special Process Validation - Electroplate - 7.5.2 of AS9100B
190. Configuration Management Simplified - Complying with AS9100 Clause 4.3
191. Parts Rework / Repair SOP (Standard Operating Procedure) needed
192. AS9006 Standard Reference
193. FAIR (First Article Inspection Report) for Engineering Services Organisations needed
194. Control Of Production and Service Provision - Onsite /offshore design and development
195. Just AS9100 Approved - High Speed Spin Testing company
196. Configuration Management for an Engineering Services Organisation - Seeking Procedure
197. Grain boundary effects in alloy depletion analysis - SAE AS7101 requirement
198. Do you have to go through a registrar to get AS9100 Certification?
199. Supplier Material Validation
200. Sampling - Clause 8.2.4 - What do the words "known non conformities" mean here?
201. Special Process definition - Clause 7.4.1 part d
202. Traceability Required for ALL Components? AS9100 Clause 7.5.3
203. List of organziations that provide 3rd party source inspection - Aerospace
204. 7.5.1 Control of Production and Service Provision for Nadcap per AS7108
205. Military Depot level maintenance or MRO forum
206. How to obtain AS9100 registration
207. AS 9100 and EAC 17 & EAC 21 Compliance
208. Where to buy a copy of the AS9100 Standard only?
209. Need help with AS9102 form #2.
210. Preparing small company for AS9100 registration - Am I missing any procedure(s)?
211. AS9101 - Any major differences from Revision B to Revision C?
212. Test records shall show actual test results data - 8.2.4.1 Inspection documentation
213. Does my Technical Library belong on my Documents List?
214. Employee owned gages not entered in calibration system - AS9100 Clause 7.6
215. Supplier Excellence Alliance (SEA) - What is the SEA?
216. Successful AS9100 certification audit
217. Monitoring of significant events by Design Organisations
218. Inspection Measurement Documentation - AS9100B Clause 8.2.4.1
219. AS9100 Clause 7.3 - We do make fixtures from the prints sometimes
220. AS9102 - Is it invoked when AS9100B is called out?
221. What is meant by "Test Specimens" per AS9100 Clause 7.4.2 f)
222. NonConforming product NCR during Manufacturing vs. NCR only at final inspection
223. Is there is a questionaire for AS 9006 Quality System Standard?
224. Benefits of AS9100 Certification vs. Cost of AS9100 Certification
225. What do I need to comply with AS 9100 Clause 7.5.1.4
226. Quantifiable and Measurable Quality Goals?
227. First Article Inspection in an AS9100 service industry (Final product non tangable)
228. AS9120 - Should planning of product realization be excluded?
229. Who Should be using AS9006
230. Invitation to provide input on 9100/9110/9120 revisions
231. Corrective action against the auditing agency? Written contract is in error
232. Mandatory Procedures - Does AS9100 REV B require mandatory procedures?
233. Role of different categories of auditors in AS 9100 audits
234. I am looking for software developers with experience working with AS9100
235. Nonconformities against General clauses in ISO 9001:2000
236. NADCAP Endeavor
237. What is the best method to audit AS9100 clause 7.2.1 and 7.2.2
238. I want to know whether Development is a part of Design or not.
239. What should be filled in FAIR (aerospace engineering services)? Clause 8.2.4.2
240. Data Card example and what is required on a Data Card
241. We passed our AS9100 audit
242. Safety Hazard Analysis Report - Need format or an example
243. IAQG Sanctioned Resolutions for the Aerospace QMS Certification Scheme
244. FAI and rework documentation - How will this affect my FAI file?
245. New OASIS database feature - Contact the CB with concerns about a supplier
246. Small Company wants AS9110 Certification
247. Tasked with gaining AS9100 certification
248. Need solution to AS9100 signature requirements on the plans, and/or changes
249. Our Parent company is our supplier? FAI (First Article Inspection) not required?
250. Question about AS9100 Inspection Documentation