TS 16949 section 7.6 requires that all monitoring and measuring software be confirmed prior to intinal use and as necessary. My company uses GageTrack and DataMyte. Has anyone performed a confirmation on these and how. My guess is to have a known test and see if the results are the same. Does anyone know of a published or known standard for X-R charts and Gage R&R's.

Hi
My best guess is enter the same data as in MSA book QS9000 book and check the results and compare with the book.

If you have a measuring machine you have to do a msa on the system. For initial test of the system you can test a master piece with known characteristics.

Hope this helps you