Does anyone have a copy of a product specification template? I've been asked to come up with one and I'm not sure where to start. We're wanting to standarize our specifications so they all have the same outline.


Thanks
q-m

every company I've worked for has had a different product specification format. A spec for a wing nut can be very different from a spec for a circuit board.

It might help if you tell us what you make.

every company I've worked for has had a different product specification format. A spec for a wing nut can be very different from a spec for a circuit board.

It might help if you tell us what you make.

Thanks,

We make support communication equipment for aircraft OEMs.

Any template would work I just trying to figure out what the outline should consist of.

Thanks again,


Quality-Misfit

Thanks,

We make support communication equipment for aircraft OEMs.

Any template would work I just trying to figure out what the outline should consist of.

Thanks again,


Quality-Misfit

more questions, just trying to narrow it down...

What is the purpose of the specification?
Is it for internal use only or will it go to customers?
If internal who will be using it?
Is the goal to make it as short and sweet as possible or is to be more like a technical file with design specifics?

more questions, just trying to narrow it down...

What is the purpose of the specification?
Is it for internal use only or will it go to customers?
If internal who will be using it?
Is the goal to make it as short and sweet as possible or is to be more like a technical file with design specifics?

What is the purpose of the specification? I would like to use it as a design specification for new product.

Is it for internal use only or will it go to customers? Both.

If internal who will be using it? Engineering, quality, and manufacutirng.

Is the goal to make it as short and sweet as possible or is to be more like a technical file with design specifics?[/ I wouldlike for it to be simple but I want to ensure that we hit all the high points too. :thanx:


Thanks,

quality-misfit

Thanks,

We make support communication equipment for aircraft OEMs.

Any template would work I just trying to figure out what the outline should consist of.

Thanks again,


Quality-Misfit


Here's one from a quick google search:

10.2.4 Performance Specification

The Weatherproof Handset RF Call Box shall meet the following performance and physical specifications:

Mechanical Specifications
Physical Dimensions
Material Valox® (FV649 reinforced polyester)
Shipping Weight Color Gray
Environmental
Temperature Range -20° C to +60° C
Weatherproof Rating NEMA 3R
Humidity 95% non-condensing
Audio Level to RF Module 50 – 500 mVrms
Audio Level from RF Module
Audio Distortion 1.5%
Speaker Output Level dB SPL at 1 meter (max.)
Handset Receiver Output Level
Battery
Output Voltage 12 V dc
Required Charge Voltage 13.8 V dc
Cycle rating 6 sec. transmit; 6 sec. receive; 10 sec. standby 1.3 battery
Battery life (No operation)
Battery life (2 Watt Output) cycles (over 7-day period)
Battery life (5 Watt Output) (over 7-day period)
18 Ah battery
Battery life (No operation) days
Battery life (2 Watt Output) cycles (over 30-day period)
Battery life (5 Watt Output) cycles (over 30-day period)
External DC Power Source
Voltage Output (adjustable) Regulated 13.8 V dc required for battery trickle charge
Current 2 amps
General
Push-to-talk minimum transmit time Factory set @ 4 sec. (adj. 0-31.875 @ 0.125 sec. intervals)
Push-to-talk maximum transmit time Factory set @ 20 sec. (adj. 15-60 @ 1 sec. intervals)
Stand-by time Factory set @ 10 sec. (adj. 0-255 @ 1 sec. intervals)
Frequency range VHF: 154-174 MHz
UHF: 450-470 MHz
Antenna impedance 50 Ω
Operating voltage 8-15 V dc, 13.8 V dc nominal
Encoder/decoder CTCSS tone, DCS digital
Receiver (measurement procedures made per ANSI/TIA/EIA-603)
Sensitivity (12 dB SINAD) 0.25 μV
Inter-modulation VHF @ -65dB, UHF @ -60dB
Audio output 700 mVrms with 3kHz-deviated signal
Transmitter (measurement procedures made per ANSI/TIA/EIA-603)
RF output 2 or 5 watts
Spurious and harmonic emissions < -20 dBm max.
Audio Input 300mVrms for 3kHz-deviated signal
Modulation Sensitivity 100 mVrms @ 60% peak dev.
Approvals
FCC Identifier VHF: AIERT 17-142
UHF: AIERT 17-442
FCC Compliance Part 90
IC Certification VHF: 1084A-RIT 17142
UHF: 1084A-RIT 17442
VHF Antenna
Dimensions Maximum 3.63 inches high
Mounting BNC connector
Impedance 50 Ω
UHF Antenna
Dimensions Maximum 3.75 inches high
Mounting BNC connector
Impedance 50 Ω