Hello everybody,

I am looking for the Toyota Weld spec TSH5603G


Can some one here has a electronic copy?

Thank you
Alex

With the hope of not appearing to be rude or socially unacceptable, have you asked Toyota?

Here is a weblink if you're a Supplier. http://www.toyotasupplier.com

If you're not a supplier it may be proprietary. Why do you need this specification? (Except for obvious reasons)

I did a Google and only came up with some Thai stuff.

With the hope of not appearing to be rude or socially unacceptable, have you asked Toyota? Good point.

I will say many times over the years I have found getting a specification from a source other than from the originating company was faster. Sometimes it was a matter of the specification being called out on a print from a customer who was not design responsible, and getting the customer to get a copy of the print from their customer was near impossible.

That may be so, but if you want to know how to act in Rome wouldn't it make sense to ask a Roman?

Like I said, good point. I agree. I'm not saying one should not try to get a copy from (in this case) Toyota. However, like I say, I've seen where getting a spec was faster getting it from someone else who had it than from the Romans who made one jump through hoops first. I've been in the situation where I couldn't get a spec because I wasn't a direct supplier, and the customer didn't have a copy (and was dragging their feet getting a copy from their customer). Rather than delay the project, it was simply faster getting a copy from someone I found that had a copy.

If anyone has any information on Toyota Weld Specification TSH5603G, it will be appreciated.

Both of you guys are right. If I want the "correct" version of the spec I should ask Toyota, but sometimes is faster if you ask around the net.
As soon as i get it I will paste it here. Thank you
Alex

Please don't paste it if it's copywrited!

Good luck