Does anyone have a sample gage block uncertainty budget sheet that you would be willing to share?

This is a bump! Appreciate if anybody can help out.

I found a spreadsheet (inms-ienm.nrc-cnrc.gc.ca/clas/spreadsheets/uncertainty_budget_template.xls) from the National Research Council of Canada.

The sheet itself is good, but it is for calibration of a 0-1" (25mm) micrometer, using Grade 2 gage blocks.....do you need to develop the budget for gage blocks themselves, or for the items you may use them to calibrate?

The sheet itself is good, but it is for calibration of a 0-1" (25mm) micrometer, using Grade 2 gage blocks.....do you need to develop the budget for gage blocks themselves, or for the items you may use them to calibrate?


I am looking for an example of an uncertainty budget for gage blocks themselves. I need to identify the uncertainty components and the distribution method for each.

The micrometer sheet is great, too. I am expanding our lab to include dimensional calibrations and any example of pins, plugs, indicators, gage blocks, mics, calipers, etc. would be extremely helpful.

http://www.iop.org/EJ/article/0026-1394/41/3/L03/met4_3_L03.pdf?request-id=1edbdf5f-624c-4a9d-bfc7-e31b7bfcccde

Table 1 is a good example of a budget for gage block. In fact the entire publication has some good examples in it in regard to uncertainty calculations.

Hi,

1. Download QMSYS Uncertainity Workshop - is free for 14 days.

2. Use example "EA4-S4-Calibration of a gauge block of nominal length 50 mm.gmf" for GUM-Method or

3. Use example "EA4-S4-MC-Calibration of a gauge block of nominal length 50 mm.gmf" for Monte-Carlo Method (recommended).

http://www.metrodata.de/examples/s04.html

Example of a 50mm gage block from EAL-R2-S1