|
*Please be aware that SOME RECENT forum threads may not yet be indexed by Google. |
|
View Full Version : 316LVM Cannulated Mill Needed mtbjosh 17th April 2008, 02:47 PM I'm trying to find a mill to make me 316LVM per ASTM F138 with an OD/ID of .250" x .067" and also .375" x .102". Minimum tensile of 160ksi. I've tried Forecru, Carpenter, Sandvik, but with no luck or with 40 week lead times. Does anyone know of any mills in France or whereever that I could contact personally to get this? I'm looking for at least 1000' feet of each. Thanks! Josh 951-836-0851 world quality 17th April 2008, 03:54 PM You Might try these: Contact Us | Home | Terms of Use & Privacy © 2004 Vita Needle Company, Inc. • 919 Great Plain Avenue • Needham, MA 02492 Phone: 781-444-1780 • Fax 781-444-3956 • Email: sales@vitaneedle.com Info@unimed.ch 9This covers France, Germany, England mtbjosh 17th April 2008, 04:09 PM Yup, I've tried them too! Jim Wynne 17th April 2008, 04:33 PM Yup, I've tried them too! Check the attached PDF--contact info at the end. This is not an endorsement, and I have nothing to do with the company. |
|