http://www.elabs7.com/content/510702/banner_solutions_training.gif (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,5sph,h9y4,h0h3,aims) http://www.elabs7.com/content/510702/banner_dnvlogo.gif (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,5sph,h9y4,h0h3,aims)

ISRS® Solutions and the OSHA Top 10 Countdown
"If only I had a crystal ball that could see non-compliance with OSHA rules and provide some guidance on managing conformance systems!"
- Anonymous DNV author
Well, it's paper (or electronic), not crystal, and you have to read it to get information from it, but the International Safety Rating System® (ISRS®) (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,9tr1,4y6g,h0h3,aims) has been a safety director's best friend since the late 1970's. Now in its seventh rewrite, the IxRS family provides a plethora of help across safety, quality and environmental management systems.
For the next ten issues of DNV's eMail Blast, we will be counting down the infamous "OSHA Top 10 Citation List for 2008" and linking ISRS requirements that, if managed properly, could help mitigate the conditions or practices that lead to such infractions.

The 10th most frequently cited OSHA standard for 2008 was:
#10 - Electrical systems design, general requirements, general industry (29 CFR 1910.303)

Common violations included

Failure to adequately guard electrical equipment
Failure to keep work spaces clear of electrical hazards
Failure to identify disconnecting means and circuits
Etc.

ISRS® sub-element activities that could control these risks and therefore reduce the likelihood these types of citations are:
ISRS 3.1 Planned General Inspections - Using a systematic approach to check compliance with electrical standards.
ISRS 7.5 Sources of Energy Controls - Using surveys and targeting objectives to ensure that disconnecting means and circuits have been identified with effective labeling, color-coding, etc.
ISRS 14.2 Hazard Identification and Risk Assessment - Using a systematic approach to ensure that all hazards relating to electrical exposures are identified and evaluated.
ISRS 14.2.2 Follow-Up System - Developing action plans and ensuring implementation of controls and routine hazard reviews to ensure that all identified electrical exposures are properly addressed.

These notes are provided from DNV's International Safety Rating System®. Your hands on, hands down, practical safety solution.®
Call now to speak to a DNV Safety Professional 1-800-486-4524.
DNV Academy Training Courses
HEALTH & SAFETY

Internal OH&S Management Systems Auditor (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,djz1,l8dw,h0h3,aims) (OHSASIA)
Houston, TX - July 7-9

OH&S Management Systems Auditor/Lead Auditor (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,4d1x,g95z,h0h3,aims) (OHSASLA)
Atlanta, GA - Sept. 28-Oct. 2
Houston, TX - November 2-6 </B>

Incident Investigation (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,k86c,7q6b,h0h3,aims) (II)
Houston, TX - July 28-30
Long Beach, CA - August 11-13 Atlanta, GA - October 13-15
Modern Safety Management (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,hu1k,163o,h0h3,aims) (MSM)
Houston, TX - April 21-24
Las Vegas, NV - May 5-8
Chicago, IL - May 12-15
Houston, TX - September 15-18 Seattle, WA - September 22-25 Atlanta, GA - December 1-4
msm2 ... Building Your Risk Competence (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,49lq,dn1e,h0h3,aims) (msm2)
Atlanta, GA - September 1-3 Long Beach, CA - November 3-5
Risk Management - The DNV Approach (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,2xtn,9myu,h0h3,aims)
Houston, TX - May 27-28

ISO 28000 - Food Supply Chain Security (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,gbdl,67d9,h0h3,aims) (ISO 28000-SMSIA)
Houston, TX - August 25-27
QUALITY - ISO 9001:2008

Internal QMS Auditor (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,1q66,9frg,h0h3,aims) (QIA)
Houston, TX - July 21-23
Atlanta, GA - August 11-13
Detroit, MI - Sept. 22-24
San Diego, CA - Sept. 22-24
Houston, TX - November 10-12
Integrated Management Systems (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,brmp,ja2l,h0h3,aims) (IMS)
Houston, TX - June 23-25
San Diego, CA - August 18-20
Atlanta, GA - September 15-17
ISO 9001:2008 Series Auditor/Lead Auditor (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,m3dx,2a91,h0h3,aims) (QLA)
Houston, TX - April 27-May 1
Houston, TX - July 13-17
Long Beach, CA - Sept. 14-18
Houston, TX - October 5-9 Effective Root Cause Analysis for Corrective and Preventive Actions (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,mfmt,62dc,h0h3,aims) (ERCA)
Houston, TX - April 24
Long Beach, CA - May 15
Atlanta, GA - August 14
San Diego - September 25
Long Beach, CA - October 23
Houston, TX - November 13



DNV Academy Courses - Training with Impact


AEROSPACE - AS SERIES

AS9100 Aerospace QMS Internal Auditor (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,jb1h,538u,h0h3,aims) (ASIA)
Long Beach, CA - May 12-14
Long Beach, CA - October 20-22

ENVIRONMENT - ISO 14001:2004

Internal EMS Auditor (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,996f,auew,h0h3,aims) (EIA)
Houston, TX - May 12-14
San Diego, CA - June 16-18
Houston, TX - September 22-24

Environmental Management Systems Lead Auditor (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,e099,d64b,h0h3,aims) (ELA)
Houston, TX - June 22-26
Houston, TX October 12-16
Onsite Training
DNV can present training for personnel at all levels of your organization based on your needs.
If you have 6 or more employees to train, and are interested in saving money while benefiting from DNV's knowledge and expertise call (800) 486-4524 or visit www.dnvtraining.com (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,5sph,h9y4,h0h3,aims). Discounts

DNV offers discounts to organizations who:

Register 45 days or more in advance
Have multiple attendees
Sign up online (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,5sph,h9y4,h0h3,aims)






FOOD SAFETY NEW COURSES!

ISO 22000 Internal Food Safety Management System Auditor (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,6rc2,2831,h0h3,aims) (FSMSIA)
Houston, TX - June 9-11
Atlanta, GA - August 18-20 Houston, TX - October 27-29
Introduction to BRC Food Safety Course (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,jr9s,kaf7,h0h3,aims) (BRCI)
Houston, TX - May 18
Houston, TX July 20 Houston, TX - September 21
Introduction to GFSI Food Safety Standards Course (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,8s31,k5tq,h0h3,aims) (GFSSI)
Houston, TX - May 21
Houston, TX September 24
Hazard Analysis and Risk Assessments in Supporting GFSI Standards (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,189u,86lq,h0h3,aims) (HACCP)
Houston, TX - July 23-24
Internal Auditor Course for International Food Standard (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,2yy4,jzzu,h0h3,aims) (IFSIA)
Houston, TX - May 19-20
Houston, TX - July 21-22
Houston, TX - September 22-23 Course dates and locations are subject to change. Check online at www.dnvtraining.com (http://www.elabs7.com/c.html?rtr=on&s=ay26,fiul,txu,5sph,h9y4,h0h3,aims) or with a representative by calling 1-800-486-4524.

The 9th most frequently cited OSHA standard for 2008 was:

#9 - Machine GuardingGeneral Requirements for All Machines (29 CFR 1910.212) Common violations included:

Failure to provide one or more methods of machine guarding
Failure to guard the point of operation of machines whose point of operation exposes an employee to injury
Failure to anchor fixed machinery
Failure to guard blades
Failure to affix guards to machines


Examples of ISRS® sub-element activities that could help control these risk to people and property while also reduce exposure to regulatory citations include:

ISRS 3.1 Planned General Inspections - Integrating positive recognition verbally or in writing, when above standard practices are observed to reinforce positive performance.

ISRS 3.1 Planned General Inspections and 3.7 Pre-Use Inspections - Using an internal inspection program instead of waiting for regulatory inspectors to identify deficiencies in machine guarding and ensure employees verify guarding is in place prior to performing task.

ISRS 8.2 Specialized Work Permit System - Verifying your system ensures equipment tagout when guarding must be removed for maintenance and have a process to ensure guarding is in place prior to resuming operations. ISRS 14.1 Engineering and Change Management - Using a system to keep the organization current with relevant regulations, codes and standards to ensure compliance, ISRS 14.2 Hazard Identification and Risk Assessment - Using a systematic approach to ensure that machine guarding hazards have been identified by qualified individuals on a scheduled basis, ISRS effectively defines and integrates proven management practices to assist in building an effective management system to control risk to people, property, the environment and reduce regulatory violations.