terranceyu
2nd November 2009, 10:41 PM
Hello ereryone,
I am new to cove, and actually happy to see Cove served as the mdeium of information provider and intellectual sharing betweens all the experts.
I come with several questions, and hope the gentleman / ladies in the forum will help me, and provide some opinions/ guidelines. Thanks,
Currently we have given a new pcba for medical device project, which I should develop a sampling plan based on the information. In the provided documentation, the requirements is Special Inspection Level 3 per ANSI 1.4, AQL = 1.0%.
ISO 2859-1 is the sampling procedures for inspection by attributes i came accrosed.
Question: :confused:
How to relate this ISO 2859-1 to ANSI 1.4?
Is the sample size code letter provided in ISO 2859-1 similar to ANSI 1.4?
As this is newly developed project, is it AQL= 1.0% is the most appropriate, pls advise.
Cheers! :)
I am new to cove, and actually happy to see Cove served as the mdeium of information provider and intellectual sharing betweens all the experts.
I come with several questions, and hope the gentleman / ladies in the forum will help me, and provide some opinions/ guidelines. Thanks,
Currently we have given a new pcba for medical device project, which I should develop a sampling plan based on the information. In the provided documentation, the requirements is Special Inspection Level 3 per ANSI 1.4, AQL = 1.0%.
ISO 2859-1 is the sampling procedures for inspection by attributes i came accrosed.
Question: :confused:
How to relate this ISO 2859-1 to ANSI 1.4?
Is the sample size code letter provided in ISO 2859-1 similar to ANSI 1.4?
As this is newly developed project, is it AQL= 1.0% is the most appropriate, pls advise.
Cheers! :)
