Marc
10th September 1999, 04:29 PM
Date: Fri, 10 Sep 1999 12:19:58 -0400
From: SERGIO_LOPEZ-CARMONA
Subject: Re: DMM Calibrations
Hello Luiz Fernando:
There is a standard (document) which recommends to use the 10%, 50% and 90% of every range as the key calibration points to be tested in every DMM. The document is ANSI-C39.6 and can be bought in ANSI.
Sergio Lopez-Carmona
From: SERGIO_LOPEZ-CARMONA
Subject: Re: DMM Calibrations
Hello Luiz Fernando:
There is a standard (document) which recommends to use the 10%, 50% and 90% of every range as the key calibration points to be tested in every DMM. The document is ANSI-C39.6 and can be bought in ANSI.
Sergio Lopez-Carmona
