i am new to this area..any expertise here can assist or help me? how to conduct a machine capability study? especially for eletrical discharge machine (EDM).is there any standard procedure?what are the parameters of the machine I need to look into?

Hai

As per the machine capability Ananlysis .We need not to go for testing machine paremater somthing like discharge voltage and rate .

The machine capability study is been conducted that the machine is capable of produce the required precesicion and accuracy.For that we have to take 125 or 50 continous components from the machine and go for the Capability study which is as same as process capability analysis method.And for the accpectance criteria the MPk should me more than 2 (What we call it as Cpk in Process capability).

REGRADS

R.L.SATTHISH KUMAR



For other readers if any corrections pl let tell me for further improvements.

Any current comments from the experts here?

Also see: Machine Capability (http://elsmar.com/wiki/index.php/Machine_Capability)

Hello everyone,

try using this attachment

let me know if someone finds it useful
nb:I can not attach the file, how can I do?
thanks

........................ nb:I can not attach the file, how can I do?
thanks

Welcome to the forum.

Read: File Attachments - How to Attach a File to a Post in a Thread (http://elsmar.com/Forums/showthread.php?t=10668)

Hello Harry,
thanks for the help :).

I hope the attached document is useful to someone
ciao