• Alternatives to welding two pieces of aluminum extrusion together at a miter joint
• Measurement of long pieces of Aluminum extrusions
• Juice seperation in 50% Orange Juice cordial
• Ultrasonic Welder Branson 8700 series Service manual
• Is there a standard concentricity?
• Need New AMS 2750 Compliant Temperature Data Logger
• Dry vs. Wet Grinding
• Intermittent failures either due to component or machine variations
• Requesting help on SMT related issues (Moisture Sensitive Components)
• Traceability in Electronics Assembly
• Labeling and Identification of stainless steel parts in process
• Soliciting recommendations for a fast turnaround calibration house - Mass Flow Meter
• Dimensional change with PA raw material product
• Color Codes for different gases
• Color Codes and visual floor marking - Are there any Standards?
• Cost Estimation of Sand Casting Process including the Pig Loss in estimation
• Numbering system for inventory of bolts, washer, and nuts
• Taber Wear and Abrasion Testers
• How to specify Paint or Plastic Color - Pantone or Manufacturer Specification?
• Injection Moulding Tooling validation checklist - Example wanted
• Phenolic Resin - Colour Variation - Will oxidation change its color?
• How to evaluate or measure the complexity of product?
• Information needed on Morflex Bimetal
• Granite Surface Plates - Maintenance, DOs and DON'Ts
• Can you change the test specifications based on Histogram?
• Controlling CNC Machine Programs - Your recommendations appreciated
• Steel Casting defects - Again - Pressure Test Failure
• PCBA Visual Inspection Tools & Methods - discounting Optical Tools
• Gloss/color - How much does gloss affect the appearance of color?
• German drawing of cylindrical gear - Glossary - What does "a" or "Aae/Aai" mean?
• Step by step process for Wire Harness Fabrication needed
• Manufacturing Milling and CNC FMEA Examples
• Holes or Voids in co-extruded 65A TPE & 50D part
• Check sheet for assembly operation station audit
• Control of a Harness Board - Our auditor wants the engineer to Control
• Cleanroom vs. Clean hood - MIL-PRF-38534, Class K (space level) for hybrids
• Wordless Assembly Instruction examples
• Photomask Processing Equipment Manufacturing and SPC
• Costing work sheet for Plastic Injection
• Injection Molding Process Regulations
• Ultrasonic Welding of PBT plastic parts - Defining the cause of over-welding
• Cleanroom Class for hybrids
• The Unholy Trinity - Sales, design and production
• Material Handling & Storage work instructions
• ASTM F 745-07, Specification for 18Chromium-12.5Nickel-2.5Molybdenum Stainless Steel
• RUBBER PART has a special strong smell - Over-moulding with NBR rubber
• Measuring Variation in Straightness of Barstock
• Steel Casting Defects (Cold Shut) - Expert Advice needed
• Manufacturing Cost Estimation and Costing Procedures
• Visual Acceptance Criteria for Porosity in Ferrous Castings
• OEE for Food Manufacturing - Non Dairy creamer manufacturing
• Overall Equipment Efficiency (OEE) calculation of 2 different scenarios.
• Missing inserts in injection molding
• I need help with containment practices - First off/coil change containment
• Cladding on Brass - Seeking companies that clad on parts such as brass pieces
• Have you ever been rejected for a reference dimension being out of tolerance?
• Plating Internal Threads in Tapped Holes - Go Gage no longer enters
• Recycling Thermoset Material
• Plastic Identification/Test - Melt Flow Index to Determine Correct Material?
• Part Number Assignment, Should be coded or Random?
• Implementing external customer changes procedure
• Inspection Help need to make a cast impression
• Blueprint reading, Implied use? Drawing shows an implied orientation
• Need help finding medical grade wire
• ECO (Engineering Change Order) Revision - Letter change or part number change?
• Heavy duty rust protection advice needed!
• Disposal of Controlled Substances
• FDA - "Net Quantity of Contents" - Manufacturing filling process
• Gemba Lot / Box Label Printing?
• SMT Mounter: 2 general questions (air release pressure & machine history)
• Who does most of your inspection - QC or Production
• What is acceptance criterion for get new machine ?
• FPY (First Pass Yeild) Calculations for Sampling
• Operating programs - Good or Bad? Looking at JobBoss
• Process Control in Casting Industry?
• Trying to decipher drawing - Hole Size
• Corrective Action Template needed
• Formula for determining finished good roll diameter
• Yields & Through Put Rates - Food processing industry
• Slip fit - Size on size dilemma for pin and plug gages
• Chrome plating visual standards
• What are the inputs and outputs of the general budget process?
• Tolerance Chart in machining process (stack up)
• Solderability - Objective Evidence of Conformity to Standards - J-STD-610
• What would Cause hole size smaller during the punching process of plexiglass?
• Average fill label - "e" Mark, probably a UK specific requirement.
• Yellow stains on anodized surface
• What is meant by two throws, three throws etc, when applied to Compressors?
• Fullscope with Microsoft AX ERP System
• Need help in defining a World Class Certified Workcentre
• Effective FIFO (First In - First Out) - Materials Management
• Changing manufacturer's part number
• Dimensions and Tolerance Callout - Straightness of shaft - Concentricity
• Caterpillar JS-13 Standard Required
• Critical Component Definition
• Gold Wire Intermetallic Test (Wirebonding Process)
• Weld Specifications - EU vs. AWS - Are AWS procedures recognized by the EU?
• Plant Layout System from Scratch (AutoCAD)
• Customer Approval to Substitute Nylon 6/10 with 6/12?
• Identifying the 7 Wastes and Adding "Lack of Creativity" as the 8th Waste
• How does "Manufacturing Manager" differ from "Production Manager"?
• OEE (Overall Equipment Effectiveness) Downtimes Calculation
• Assembly Line Traceability using Green Tags - Conformance with ISO9001
• Manufacturing Process for a Front Bumper - Passenger Car Application
• Best ERP, MRP Application, considering Quality?
• Intelligent Part Numbering Schema for Part/Material Traceability
• Machine Tool Calibration - Machine Capability Studies on CNC Machine Tools
• Brass bar stored in green wood boxes tarnished
• Beverage Bottle Closure - Torque Problems - Rotary Cappers
• Dimensioning Anodized Parts
• Experts on Aluminum? 2024 T4 and T351 Bar Question
• Test Method - DIN ISO 1133 for melt flow needed to verify supplier results
• Need advice to implement CAPP (Computer Aided Process Planning) change.
• Traceability of Product - Company A to Company B
• MIL-PRF-38534 Cost to Implement
• Do inserts need to be preheated to tooling temperature in injection molding?
• 316LVM Cannulated Mill Needed
• Cleaning Validation Protocol Help
• Soft Ware program for control of the assembly/manufacture process
• Anodized Aluminum Surface Defects - Stains, raised surfaces, imperfections
• What is the shelf life of injection molded plastic parts?
• Industrial Engineering department hierarchy
• Online Pantone PMS chart for opaque plastics
• Overall equipment effectiveness - Computing OEE taking all machines taken together
• What does "deburr" and "edge" mean?
• Serial Numbers for Product - Common sense? Optical Components for Telecommunications
• Changing the CNC program - Money Saving Idea - Thanks to all of you.
• What to manage after Plastic Injection Molding - Plastic Parts
• Thread Quality in Aluminium - Problems with the threads stripping out
• What is an Epoxy suitable for autoclaving?
• Validation & which processes are called special processes & why not all the processes
• Problems with a counter bore & the I.D. hole - .0685mm to .0762mm I.D. hole
• Thread Presence Detection - What are companies using?
• Injection Molding Quality Assurance - Best methods, practices, tools, education
• Hand Tool Selection to Remove Microjoints and Slivers off of Small Parts - Advice
• Mass vs. Temperature vs. Time - Determining Time in a Temperature Controlled Room
• Waivers - Deviations - Responsibility -- Potential departmental conflict of interest?
• Line Accumulations - Are line accumulations acceptable in today's market?
• Bowed Steel Blanks in Stamping Process
• Does your Company Supply Calipers for Employees?
• Single Minute Exchange of Die - Preparing to launch a SMED project
• Facility setup for Substrate & PCB Visual Inspection
• Product Development Management System (PDMS) that's too complex.
• Eliminating Systemic Errors in the Labeling Process
• Can we comingle Gauging Vision System and 3 Point Micrometers?
• Characterization and Measurement of Surface Wear
• Informing Customers of Process Changes - Is this considered a process change?
• Rotary Slitter for Cutting Paper or Packaging Materials - How to make it?
• Cost Estimating Spreadsheet for a CNC Machine & Weld Shop
• Single Minute Exchange of Dies (SMED) Information
• Work Sampling of a Manufacturing Operation - FORM needed
• Is an empty inspection box on form OK? Suggestions?
• Surface Finish parameters - Mechanical stylus based testing of a cylindrical part
• Surface Finish Requirements (Ra 150) for Blasted Titanium Surfaces
• Shelf Life - The best way to monitor products with an expiry date
• Any rule to set Generic Process Target % (per cent)
• Surface Finish Measurement Technique
• Customer wants to Reduce GD&T Tolerances on Sheet Metal Subassemblies
• Medical Devices and Mixed Lots
• Benefits of an Out of Box Audit on High End IT Products
• Automated Processing and Placing Parts
• How to manage production? How to become an excellent production manager?
• Manufacturing, Purchasing & Planning Functions under Engineering - Good idea?
• How to classify maintenance level of equipments?
• Tyco TMS 2000Plus Replacement
• Generic Label Die Cutting Process flow
• "Scale Counting" practices
• Die Cutter for Kevlar Fabric
• Which sample to use for PV test or DV test
• How can I die cut foam - I'm thinking of a simple hand machine?
• Production Planning, Scheduling and Warehouse Management
• Traffic, Distribution, Imports - Reducing Cost, Traffic Process
• 6-32 UNC-2B Threads are Tight after Cleaning before Painting?
• CNC Machining of Small Engineering Plastic Parts for the Semicon Industry
• Pareto Analysis for Common Defects - To pareto or not to pareto
• Potential Failure Mode - Mix Charge for Hardness - Casting Process
• How to Create a Traceability System in Manufacturing Process
• One Tailed Process Validation - Process with only a lower specficiation limit
• Grade D Laboratory Environment Airlock Requirements
• Energy Savings in Glass Tablewares Company - Continuous Improvement
• KPIs for Verification Processes - Masters Thesis
• Tooling Validation and Verification Improvement
• Qualification of a Poron Gasket for a Silicon Acoustic Sensor Chip
• Paperless Chart Recorder to Monitor Oven Cycle Temperatures
• Cost of Duplicate Part Numbers
• Process or Work Instruction (WI) to Change a Progressive Stamping Die
• Certification of Raw Materials for RoHs Compliance
• Heat Treatment Validation - Titanium (6Al 4V) for 2 hours @ 700 Deg C
• Tool Kits to Reduce Direct Time on Milling Machine
• Best/Worst Production Demonstration Runs (PDR) - Share yours
• General MIG Weld Workmanship Standard or Procedure
• Production schedule that adds actual value and makes sense?
• this is only a test
• Positional Tolerance Matrix to save us the the hassle of using the formula
• MS21075L3 nutplates versus MF5000-3
• Ideas On Wiring Configuration Control - Help STOP a Non Conformance!
• Zinc Phosphate problems - Green Bath has turned White
• Printing Industry Quality Control Traveler / Checklist needed
• How do I set up GMP's for a flexible packaging converter?
• Welding Process Control

vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser