• Another binomial use/misuse question
• Looking for a Kaplan-MacDonald Sampling Plan
• Inspector to Technician Staffing Ratio
• Material Thickness - Customer does not give us a tolerance
• Attribute Gage R&R on Torque Wrench
• Seeking Information about DISCUS Software
• Determining sample size for drop test and waterproof testing
• What does "C" in C=0 mean?
• How to inspect the 5 different dimensions using an optical comparator
• Anybody can Define about Precision and Accuracy ?
• Sampling Plans for Critical Defects
• Performing Ring Gage Calibration
• Sample Size Determination - Medical Devices
• Which control chart for incoming (receiving) inspection - Sample size of 10
• Geomeasure CMM + Mitutoyo Bright-A910 CMM: Using a SCR200 Tool Changer
• AQL vs. Cpk - Sample Size and Reduced Sample Sixe
• PRG format saved in PCDMIS PRO V4.2 can't export to CATIA V5R16
• Validation Testing - How many unit should I test prior to launch?
• GeoMeasure 6000 - Exporting buffers to a file
• Pre-Control Chart to guide in-process inspection / adjustment decisions
• Color Management - Confirming Color for Injection Molded Plastic Parts
• Rounding up Measurement results - Is it still within specification limits?
• MIL-STD-105D & MIL-STD-105E Differences
• Sampling Spreadsheet to help determine the sample size for sampling plans
• Checking Profile Tolerance on CMM's
• How to define process sampling frequency?
• Design of Lot Acceptance Sampling Plan - Zero Acceptance Number Sampling Plans
• How to know if a measurement tool is "good enough"
• Rubber O-Ring Inspection Standard - SAE J515?
• Do Package Inserts Meet the FDA Definition of Cut Labeling?
• Sampling - Measuring and Inspecting a part with both Variable & Attribute Data
• Quantity of Samples (Variables and Attributes) vs. C/I and T/I
• Philosophy of CMM Software and CMM
• Confusion on Lot Sampling - How to use sampling plans
• Reference Distance - Print which shows "1.656 REF" as a dimension
• Acceptance Sampling Methodologies
• OPL (Open Point List) in audit - Incoming inspection result
• Converting solid model formats for a Calypso CMM
• Sample Sizes for Design Verification of Medical Devices
• MIL-STD-1916 vs MIL-STD-105E, which do you choose?
• Distance between two holes tolerance
• Zero Acceptance Sampling Plan By N.L. Squeglia
• How to achieve Inspector Consistency? Specialty vehicle manufacturer
• Sampling AQL - Am I understanding it correctly?
• How clean is clean and how do you know? Small machined aluminum part
• Letter of Guarantee - EN 12546-3 (Mechanical & Physical testing on an ice pack)
• ANSI/ASQ tables (Z1.4) / OC Curves - Percent accepted, how'd I do?
• Is there any place for sampling plan if customer requirement is 20 DPPM
• CMM Inspection Approach: Teach CMM geometry by manual probing or program from nominal
• Slurry information before Test Sampling
• Product inspection specification sheet form - Examples needed
• How to Measure a Diameter - Average or Maximum/Minimum?
• Who is responsible for 100% Inspection (QC) activities?
• Screw Thread Major and Minor Diameters - parts vs. gages
• Lamination Defect in Structural Steel Plate
• Information on GD&T Symbols, what they mean, and how to inspect features
• Measurement of Large Radius (30.0") on Product - No CMM available
• Should we consider Precision of Machine Reading when setting Inspection Specs?
• What do I do when I can not find a spec from the manufacturer-Panduit ferrule crimper
• Help needed from a Zeiss Calypso expert
• Help me out please - Trig diameter question
• CMM Machine upgrade - Ways to reduce CMM inspection cycle time
• Seeking examples of Work Instructions for progressive line
• Visual inspection and acceptance criteria
• Aerospace Distributor Standards help
• Gardner Color to APHA Color Approximation
• Looking for a Source for Thread Centers
• Defining Inspection Frequencies
• How to convince customer with sampling check on lot quantity?
• Sampling Method for CNC Machined Products
• Minimum Inspection Test Plan for PCBAs including Key Characteristics
• Conversions - Decimal degrees into thousands - CMM that measures an angle
• Cyclic Destructive Testing - Continuous vs. Segments
• Medical Devices - How to justify the Sampling Plan used?
• Quality Control for Rubber Mixing and/or link to related forum
• Visual Weld inspection training
• Enquiry and Contract Records - Review and Approval
• Inspection of clamps
• ISO 9001 Certification for Landscape Gardening Company - can design be excluded?
• Sampling plans for large quantities along lines of ISO 2859-1:1999
• Draft Angles (aka Draft Allowance) - Plastic Injection Molded Parts
• Determining the Appropriate Sampling Regime when Assigning Values to an IVD Device
• Need supplier, error-proof inspection of ID threads present attribute
• Spur Gear DOP (Dimension Over Pins) Measurement - 2 or 3 Pins?
• Looking for a company that makes check fixtures (N.E. Ohio area)
• Feature Control Frame - Interpretation - Two Tolerances?
• Sampling Plan on a Centerless Grinding Process
• Leak Test - Building a master pump to calibrate pump tester
• Plastic Flexibilty - Polypropylene H1500 material
• Dimensional Inspection of Molded Plastic Parts in Seoul, Korea
• Sampling plan for Inspection by Variables (high volume production)
• GD&T Q&A session - Interpreting FCF (Feature Control Frame)
• Density Measurement of small volume of sample
• Sampling Plans - ISO 2859-1: 1999 - How to calculate the switching score?
• Rockwell Hardness Testers – Brand Recommendation
• Inspection notification processes
• How to get chemical technical data sheets
• Air gaging information - Federal/Mahr Federal 'Dimensionair' Air Gages (EAG-31111)
• How to connect AQL to confidence level?
• Statistically valid method for multiple raw material sampling
• Calculate expiration date of a product by studying stability test
• Material, Links & Information on some basic exercise on PC DMIS & CMM Metrology
• Proper GD&T for spindle & housing
• Raw Material Testing - Number of samples that should be drawn
• Inspecting Glued Components - Bubble size - Medical Device
• Where can I take a peek at ASTM standards without buying?
• Looking for a Karl Fischer test method - Mettler DL37 KF Coulometer
• Final Inspection - 1st Article Dimensions before Anodize and Passivation
• Expiration Date for Standardized Rockwell Hardness Blocks
• Use of OD Indicator Micrometers - Round Feature vs. Flat Surfaces
• Sample determination using minitab if everything elses is a variable
• Universal Master Square/Toolmakers Surface Plate Square
• Looking for a copy of MIL-I-45208
• Bevel Protractor - Which one to choose?
• Countersink Hole Inspection - Old School Technique.
• GD&T: True Position interpretation
• Non Contact OD Measurements of Ceramic Coated Rods
• How to Select a Statistically Valid Sampling Plan
• Perfect Form at MMC is Not Required.
• Tell me why I should no longer reference MIL STD 105E?
• Sealed bag testing equipment
• Do you know a portable hydraulic oil analyzer?
• Runway Crane or Hoist Inspection Checklist needed
• Urgent Release System for Medical Devices
• Tool Rack Inspection - Load test for the tool racks
• Chain Hoist and Slings Inspection Sheet - Needed
• Asian Supplier Sampling Plans besides MIL-STD-105? My thought was ISO 2859?
• Surface Roughness Testing - Comparison of models for measuring Ra, Rmax, Rt, Rz
• Is it a must for IQC department to issue VCAR when a lot rejected?
• Big Batch (Large Lot) Sampling - Label Printing - MIL-STD-105E
• Laboratory Service for Qualification of First Article
• Recommendations for detecting "Triangle Effect"
• IQ/OQ/PQ in a Tool Shop with a Small Injection Molding Plant
• Sheet metal inspection - constrained or not constrained
• What does NS stand for in reference to threads?
• Surface Finish on machined brass (or other metals)- Attribute or Variable inspection?
• Grain size per ASTM - "Austenitic grain size of 5 or finer" - Steel Industry
• How do I Calculate a Weight Tolerance? Plastic Injection Moulding
• Sample Size and Confidence question for Small Sample Size on Large Lots
• Variations in Tool Use Techniques and How to Improve Consistency?
• Concentricity - Down & Dirty Method?
• How do I convert inches of mercury to pounds per foot
• Finding Reasonably Priced Ring Gages
• Sampling Plan for Verifying Inventory Status
• Which Standard Regulates Dirt, Fibers, Hairs, etc. on/in a Medical Device?
• Percentage of tolerance reported by supplier using the MIN or MAX dimension values
• Portable Hardness Testing and Testers for Incoming Bar Stock Testing
• Attribute or Variable Measurement? Outer Diameter of a Tube
• Relationship of ANSI Z1.4 2003 and ISO 21247:2005
• MIL-STD 1235C - Is it still Valid or has it been Superseded by another Standard?
• Improving the Effectiveness of a 100% Control that uses a Bore Gage
• Recieving Database Help?
• Controlling Temperature and Humidity in the CMM Room and does anyone use Artifacts?
• Koslow Scientific Metal Test Kit - Control and Calibration
• Dimensioning Help GD&T
• Magnetic Particle Inspection - Where's the threads?
• GD&T True Position structure
• Is it acceptable to use a Sampling Plan and not use the Switching Rules?
• GD&T Call Out - True Postion Call Out on Datums
• What Inspection Level for Small Lot Size and Special Levels (S1-S4)?
• Layout Table (very large surface plate) Manufacturer Options - Warranty Hub
• Tolerances +/- 1 standard deviation?
• Acceptance Sampling is Better Than 100% Inspection
• Fasteners - Thread Inspection Questions
• Hologram QC criteria - brightness variation?
• GD&T Rule 1: Gage size for form check at MMC (maximum material condition)?
• Lot Size vs. OC Curve (n,c) of a Continuous Data Collection Process
• Force Testing Instrumentation Question
• Sampling Plans for Corrective and Preventative Maintenance Service Orginizations
• Receiving Inspection Process methods discussion
• Acceptance Criteria for Attribute Data Sampling Plans shall be Zero Defects
• Sample Size for 95% CI - Lot size is 25,000 - 2% Defect Rate Process
• CMM Software Conversion - Converting from Zeiss/Calypso to Brown & sharpe PCDMIS
• Sampling Multiple Times from One Master Lot
• Setting a Sine Plate with Roll Pins - Roll Dimensions for Sine Plates
• What is AQL, Inspection Level, and Type of Inspection
• How to Calculate a True Position on a Square Slot - GD&T
• Checking Runout on Internal Bore of Main Shaft
• Please vote: term for an inspection plan for a family of parts
• Demonstrate Receiving Inspection Sampling Method is Statistically Adequate
• Green Channel Parts - No Receiving Inspection - Cable Harness Contract Manufacturer
• Inspection Check Fixtures for Blow Molded / Injection Molded Components
• Inspection Plans for Different but Similar Parts
• Why MIL-STD-105E is obsoleted but ANSI/ASQC Z1.4 is still implemented? Need Opinion
• Calibration accuracy ratio
• The Best Way to Document In-Process Inspections using MIL-STD-1916 1/12
• Final Inspection - QTY (Quantity) Check - Offset Printing Service
• Requirements for Quality Inspectors to have Yearly Eye Exams
• Incoming Material Inspection Plan - Drawing CTQ (Critical to Quality) features linked
• Visual Inspection Validation - Developing a New Medical Device
• Can you Set Inspection Frequencies Scientifically?
• How to Evaluate the Outgoing Quality Level of a Calibration Laboratory?
• Simpler Method of Recording In-Process Inspection Data - Machine Shop
• Viscometer Gage R&R (GR&R) Questions
• Using a CMM for Confirming Circular or Total Runout??
• First Piece vs. First Article - QC Inspection Terminology
• Is the first piece inspection method supposed to be in the Control Plan?
• Quality Tagging Electronic Components - ESD (Electro-Magnetic Discharge) Concerns
• What's your interpretation of Clause 7.6 - Calibration 'Interval'?
• Non Destructive Testing of plain Carbon steel castings using Eddy Current

vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser