• List of Reliability Standards
• Validating the AOI process (Automated Optical Inspection)
• Verification Test for Hydrogen De-embrittlement?
• Validate 99.5% reliability 90% confidence - Sample size calculation
• NPRD-95 "Non-electronic Parts Reliability Data"
• Where to buy a 4T mandrel for adhesion testing per ASTM B571
• MTBF calculations - Three student homework problems
• How Must Safety Integrity Level (SIL) For Ball Valves Be Calculated?
• Beta > 1 for new design? Durability test for a new system and no previous test data
• Information about FMECA for a Body Control Unit
• Calculating the MTBF for an assembly, Failure and Rework Prediction
• Life Cycle Cost worksheet - Reliability and Maintainability of systems
• Weibull formula in Excel needs to be verified.
• Life Cycle Cost for Repairable Systems and Weibull Analysis
• How to Calculate FIT
• Calculating Dissipation Factor (Df) for Air Capacitor Standards
• Industrial Standard on Accelerated Ageing test for plastic carrier tape
• Is there any tool to use for making internal specifications?
• Accuracy of the SN 29500 FIT values - Reliability Forecast and PPM
• Weibull Model - Reliability Analysis - Alpha, Beta & gamma value formulas
• Calculating MTBF for an electrical component
• Reliablity Block Diagram - RBD Concept
• How to implement Reliability Centered Maintenance (RCM)
• 'Solidity of Colour' Rubbing Test - Customer Requirement
• PCBA (Printed Circuit Board Assembly) Conformal coating material and thickness?
• Failures-in-time (FITs), DPPM and Probability Calculation Questions
• UL / Safety Testing Oscillators - Is there an "Industry Standard"?
• Calculating MTBF (Mean Time Between Failures) of different Electronic Components.
• Please help: I need the Ford WSB-M64J28-A1 specification
• How to calculate MTBF of a system based on subcomponents
• Maintainability Prediction and Analysis Programs
• A B C of Failure - Proactive Manufacturing and Maintenance
• Can anyone point me to free software (freeware) for reliabilty studies
• Definitions of a number of terms
• Using Weibull to Calculate an Optimal PCBA Burn-In Test?
• SAE AMS 2750D - Pyrometry - Heat Treating procedure wanted
• The difference between MTBF and MTBWSF and how to calculate MTBWSF of a system
• Testing Laboratory For Fire Resistance Test
• MTBF (Mean Time Between Failures) Calculation
• Does Anyone know how to check Universal Tensile Machine (UTM) ?
• Statistically Comparing Technician Techniques
• How to Measure Straightness of Small Bars or Tubes (Long Length)
• Calculating K2 and K3 Values Based on 6 Sigma - The SPC Manual
• Calculating a Standard Deviation with respect to MTBF
• Visual Inspection Standard Specification for Thick Film Hybrid Substrates
• Cpk 1.99 But Out of Specification Measurement Detected in Control Chart
• Sample for Failure Analysis - How to conduct Failure Analysis - Criteria
• Porosity Testing anyone? Ceramics using Liquid Ceramic Slurry
• Who can test to ASTM D808, ASTM D4327 and ASTM D1179 (Halide Ion)
• Interpreting Temperature Measurements
• Presentation on the concepts of reliability testing and calculations needed
• Automotive equipment sine wave vibration test condition - BMW requirement?
• The Anomaly of Calculating MTBF from Reliability
• Searching data for a reliability prediction - Calculating failure rate of an MCU
• Calculating the overall MTTR for an MTBF of 476, given four subsystems
• Validation of Processes for Production - How are doing it? Clause 7.5.2
• Reliability from Warranty data - We do not know the date put in service
• Failure Data of Cathode Stripping Machines - Reliability from the data attached
• What is Reliability? We supply an electronic assembly to the automotive industry
• MTTF Prediction for Customer Requirements - Parts-count MTTF prediction for the part
• Rms Spl And Peak Spl Spectrum - Sound Level Spectrum
• Scales and Accuracy - Getting scale companies to give out accuracy for their scales
• How many items should be tested to qualify an analog IC?
• Electronic Device Dead On Arrival (DOA) Rates
• MTBOMF ("Mean Time Between Operation and Mission Failure") - How to Calculate
• Which reliablity items should be tested for backside metallization process?
• GMW3172 - Thermal Shock and PTC cycles required to validate an electronic system
• 2 Reliability Problems - Have Answers, Need Formula
• MTBF to DPPM Calculation Based on the Unit's Typical Working Hours
• Reliability Tools - Weibull++7 and Alta
• What is the Scope and Role of a Reliability Engineer?
• Can I consider Reliability Test Plan part of the DVP&R, or the other way round
• How to choose Samples for a Gage R&R (GR&R) study?
• How to calculate tolerance intervals for non-normal data?
• Parallel RBD's (Reliabilty Block Diagram) help - Reliability & MTBF
• Minitab refuses to run saying the Design is Not Balanced - Gage R&R
• Master Validation Frequency in production - Absence of leak, thread presence, etc.
• Find the best fit of data: linear or quadratic
• Graphing MTBF (Mean Time Between Failures) or Reliability Data of a System
• Reliability and Maintainabilty plan - Example on how a R&M should be written
• Calculating Series System Reliability and Reliability for Each Individual Component
• How Can I compare measurements of different appraiser for a same product
• Test Method Qualification - Measurement Capability - What else is involved?
• Reliability test criteria for Engine Control Unit (ECU) ?
• ESD test 50% flashover discharge - Do anyone know that 50% flashover discharge means?
• Field Decay Test - Can any one recommend few independent and A2lA accredited labs?
• Analysis of failing parts - Mining equipment distributor
• Tangible Benefits from Elimination of Breakdown
• Grubbs Test for Outliers and Why there are no Z-values for N>25
• Asked to assist in Reliability and Maintainability planning for a new product
• Reliability Questions - System vs Component Reliability - Target Values
• Reliability Centered Maintenance - Anyone else doing RCM?
• Automotive Reference AIAG's THE-7
• Probability problem - The probability of picking 4 bad brakes out of 500
• Reliability & Maintainability (R&M) - Where can I find information?
• Reliability Definition - A Discussion thread
• Reliability Forum Started by Request - 11 January 2006
• Director of Reliability & Failure Analysis - Semiconductors
• Glass-Ceramic Kitchen Range - Reliability and Durability
• Seeking: Reliability & Maintainability Engineer - Aerospace - Stratford CT
• 8.2.3.1 Reliability, Maintainability and Availability - How to satisfy requirement?
• Data for reliability and measurability has not been established and included
• Software Reliability Measurement - Telecordia standard GR-282-CORE
• How to Calculate Reliability Acceptance Criteria
• Calculating MTTR - Mean Time To Repair - MIL-HDBK-472, Procedure V, Method A.
• A High Reliability Manager's Nightmare - The Lost Screw
• Ford's R&M (Reliability and Maintainability) Program - No MTTF or MTTR data
• System Reliability Projections using the Series Probability Formula
• Reliability Prediction of Complex Assemblies
• Ford Campaign Prevention Method - Ford Quality and Reliability Guidelines
• Reliability & Maintainability - No customers providing input into the R&M area
• Reliability Targets , End-of-Period In-tolerance

vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser