• General Quality Assurance Glossary - By Bill Pflanz
• Wiki vs. A Specific Forum for Acronyms, Definitions, Etc.
• Definitions Forum and the Cove Wiki
• HOW TO USE The Definitions/Acronyms Forum Including ALPHABETICAL LISTING
• A 'New' Aspect of the Cove - A Definitions and Acronyms page?
• Fit, form, and function - Origin and defintion of fit, form, and function
• Technical Files - Please explain differences and what information would be included
• Design Goals vs. Design Requirements and Product assurance plan - Definitions
• Rework vs. Repair - ISO 13485 definition
• Near Miss - Definition of Near Miss (Hit) - OHSAS 18001
• Functional and Allocation Baselines - MIL-STD-973 Definitions
• Negative coil set - Steel coil industry - Definition needed
• Major Nonconformity vs. Minor Nonconformity - Definition and Differences
• NPI (New Product Introduction) Readiness - Definition
• Control Feature - Definition as per API Q1
• Safeguarded from Adjustment - Definition - Calibration - 7.6 d)
• Accreditation, Registration and Certification - What are the differences?
• Q - Definitions of all the Q's - QM, QMS, QP, QSR, etc.
• Basic Definitions
• Engineering Change and Document Change - Definitions
• Definition of 'Disposition' when used in the context of ISO 9001
• Layered Process Audits - What are Layered Process Audits?
• FORD Acronyms (aka 'Initialisms' - Not Always True Acronymns) List
• Bench Test - Definition (in FDA context) and its difference with Clinical Study?
• Variant - Definition within Medical Device Directive
• Verification vs. Validation - What are the differences?
• Complainant - Definition of Complainant?
• Performance standard - What does that mean? Definition
• Sterile Field - Legal/formal definition
• Calibration vs. Verification - A Good List of Definitions
• Metrology Terms and Metrology Definitions - A very nice Glossary
• QRQC - Quick Response Quality Control - A problem solving tool
• Excursion - Semiconductor, Definition for
• Quality Control vs. Quality Assurance - The difference according to Juran
• Pygmalion Effect - The Self-fulfilling Prophecy
• Measurement System Analysis - What is MSA?
• Reference Standard vs. Working Standard - Differences
• Subcontracting vs. Outsourcing - Differences
• Premarket Approval - What is a Premarket approval? Class 1 Medical Device
• Stop Gap - Definition - What does "stop gap" mean?
• Kamishibai (kamishibai board is a visual management tool) audits
• Measurable Goal vs. Relevant Goal vs. Realistic Goal - Definitions
• Product Audit (8.2.2.3) vs. Layout Inspection (8.2.4.1) - What are the differences?
• Certificate of Conformance - Meaning and Definition of - Medical Device Manufacturers
• Manufacturer vs. manufactured by - What is the difference?
• Material or Materiel? Definition
• Statement of Fact - Considered Objective Evidence?
• Process vs. Activity - What are the differences?
• 1st, 2nd and 3rd Party Audits - Definition
• Critical Component Definition
• Quality Assurance - An Abbreviated History
• P-Diagram (Parameter Diagram) in FMEA Preparation
• OEM (Original Equipment Manufacturer) - Exact definition of OEM
• Rework vs. Repair - What's the practical difference?
• Procedure vs. Instruction - What constitutes a procedure? What are the differences?
• Malcom Baldrige NQA Vs European's EFQM Model
• Desk Top Procedure - Definition
• Meaning of "Triangle" Symbol alongside the CE & UL mark on electrical fan?
• Pareto Analysis (80/20 rule) - Definition of
• Core Procedures and Supporting Procedures - Definitions
• S-type Tolerance - Unilateral tolerance where the desired value is 0 (zero)
• Bulk Material - What is bulk material? Coil processing plant
• Tooling - Define Tooling in AS9100B Clause 7.5.1
• Peer Evaluation - What does Peer Evaluation mean?
• Synchronous Material Flow - TS 16949 Clause 6.3.1
• ISO Interpretation - What are Levels 1, 2 and 3 Documents?
• Probability Density Function - Definition
• Plating and Coating
• Standard - Definition of a Standard
• IAF - International Accreditation Forum
• ILAC - the International Laboratory Accreditation Cooperation
• Potential Failure Mode Definition and How to identify Failure Modes?
• ATP Requirements (QAT, FAT, OSAT, FAI) - How to Satisfy FAT and OSAT?
• TDU (Total Defects per Unit) and RTY (Rolled Throughput Yield) Definitions
• How do I measure Pounds per Linear Inch (PLI) of a Continuous Wire?
• Econometrics - What does Econometrics mean?
• Non-Conformance vs. Nonconformance vs. Non Conformance - Which is correct?
• Likert (Rensis Likert) Principles - What is the Likert Principle
• COPQ (Cost of Poor Quality) and COQ (Cost of Quality) - Differences
• Lifetime of the Medical Device - What is the most appropriate definition?
• Linearity and Eccentricity Point Definitions - Ref: ISO/IEC 17025:2005
• Quality Assurance (QA) vs. Quality Control (QC) - What are the differences?
• Management Process - What is a Management Process?
• Supplier vs. Vendor - What is the difference?
• Inverted Delta - What does an inverted delta on a print represent?
• QC and QA - Different concepts?
• Dock-to-Stock Process based on Historical Quality Performance of a Part and Supplier
• What does LCS mean as it relates to the purchasing of material?
• Deviation - Deviation Request - Definition
• Multi-Agent-Based Simulation on Supply Chain Management - Student Seeking Information
• Quality Control Circle - Student Seeking Information
• GD&T Clarification - Callout for Profile of a Surface Reference to the Datum
• Is ISO an acronym or not?
• Inverse Brainstorming
• Pass-through Characteristics Qualification
• Value Added - Definition of 'Value Added' and the Three Levels of Value Added
• Major Non-conformance and Non-conformance - Looking for official definitions
• COPQ - TS 16949 Clause 5.6.1.1 - My definition - What do you think?
• PPV or Purchase Price Variance - What is it?
• What is exactly meaning of word between "Supplier" and "Vendor" ?
• Methods or Procedures - What is the difference?
• What is SCRF?
• What is DFARS - Defense Federal Aquisition Regulation Supplement
• Multidisciplinary Approach - What is multidisciplinary approach?
• Management Representative - Can anyone define Management Rep. Sec-5.5.2
• Calibration vs. Verification of Calibration vs. Verification - Definitions
• Calibration Criticality Number - The meaning of Calibration Criticality Number
• OTP CIRC - Old drawing (1968) that calls out a dimension within .005" OTP CIRC
• WSBH and WAH - Lean Thinking
• Service Provision - ISO 9001:2000 Clause 7.5 - Meaning of Service Provision
• DPPM - Quality Indicator? Using DPPM instead of DPMO as our OQA quality indicator
• Correct SI Pronunciation
• REACH - Registration, Evaluation and Authorisation of CHemicals
• Quality or Quality Assurance - The term "assurance" should not be used?
• Controlled Shipping Containment
• First Time Quality and how First Time Quality is used to determine capacity?
• Quality Glossary from ASQ
• Outsourcing vs. Subcontracting - The Differences
• Key Process Equipment (KPE) - Some criteria and / or a good definition
• Quality Management System (QMS) vs. Quality Control (QC) vs. Quality Assurance (QA)
• NOE and SNN - Boeing Acronyms
• TWI - Training Within Industry Definition
• Theory of Constraints (TOC)
• Rv and RvK in Statistical Analysis - Inner diameter between the bearing rollers
• Internal Customer - Definition - TS 16949 Clause 8.2.1
• Major vs. Minor Finding During external ISO audit - Definitions
• Internal Customer vs. Process Partner - Definition of
• Blueprint reading, Implied use? Drawing shows an implied orientation
• Participative Management - What is Participative Management?
• Internal Laboratory as defined in TS16949 - Definition
• Independent vs. Dependent Research Variables - Define and distinguish
• Point-Cloud Data - Understanding of the term "Point-Cloud Data"
• Does VOC (Voice of the Customer) include customer specific requirements?
• Start of Saleable and Ship to Commerce - Definition of GM Terms
• Sampling - What does it mean by Sampling in ISO:IEC 17025
• Key Product Characteristics (KPC) and Critical Characteristics (CC) - Differences
• Error Proofing vs. Mistake Proofing - Differences?
• Preventive Maintenance vs. Predictive Maintenance - Distinction between
• Preventive vs. Predictive Maintenance - What is the difference? TS 16949 - 7.5.1.4.
• Value Engineering - What is Value Engineering?
• Pass Through Characteristics - Definition
• Copy Exact - Committment to abide by a Process Control Plan without deviation
• MDR, MDVR, MPR - Definitions - ISO 13485 - Medical Devices
• Gemba is a japanese term for place (Where the action is)
• GAGE vs. GAUGE - Difference between Gage and Gauge
• Silent Content - Definition of "Silent Content"? [implied consent]
• Nonconformance - How is this Top Management Definition of Nonconformances?
• Bimodal Process - What is a Bimodal Process?
• Standard Measurement Methods - Definition
• Major vs Minor NonConformances - Definition of
• IDEM - What does IDEM mean?
• Product Audit - What is a Product?
• MMOG LE aka Global MMOG LE
• Raw Material - AS9100 Definition Of A Raw Material
• KISS - Keep It Simple, Stupid
• Low Volume Manufacturing - What is Low Volume Manufacturing?
• ATP (Acceptance Test Procedure) vs. QTP (Qualification Test Procedure)
• Talent Management and Employee Engagement - HR Buzzwords
• Attribute Screens - ASQ CSix Sigma Black Belt Body of Knowledge mesurement method
• Measure, Monitor and Control in Quality Terms - Differences
• TPM (Total Productive Maintenance) - What is TPM?
• SOP (Standard Operating Procedure) vs. Work Instruction vs. Procedures
• Material flow - Evidence for the material flow to our customer
• KPC and KCC - Definitions
• Total (Blueprint) B/P tolerance - I am not entirely sure what B/P stands for
• Factored Products - Will have another contractor manufacture material for us
• Management System - Definition of
• Tier one, Tier two and Tier three suppliers? What do these mean?
• Top Management - Definition of
• Product Lifetime - Including ISO 13485 Definition
• SPAP - I've heard of PPAP, but SPAP???
• Finishing Services - TS 16949 Section 3.1.6 references finishing services
• SOX - Sarbanes Oxley Act of 2002 - US Specific
• DPMO - Defects Per Million Opportunities
• Zero Acceptance Number Sampling Plan - C=0
• Zero Acceptance Sampling - Is anyone is actually using this?
• Lean Manufacturing - Definitions of (thesis assignment)
• Recall - Definition of Recall by the Canadian Mde dev reg, CMDR
• Code vs. Standard - What are the differences?
• Error-Proofing vs. Mistake-Proofing - Differences
• DCX - Can someone tell me what is DCX stands for? DaimlerChrysler?
• Cp Cpk Pp and Ppk Definitions - I'm doing SPC and Capability Analysis
• Cp and Cpk - Definitions
• Supplier - Definition of supplier
• Vendor (Supplier) - Definition
• Annealing Process definition and Its Contribution
• What does 99.9% really mean
• Measurement Uncertainty - Measurement Uncertainty in Measurement Results
• Standard vs. Specification - What are the differences / definitions?
• Process Audit - Internal and External - ISO9000 - A Definition
• Standard Deviation - Working vs. Thinking
• Accreditation vs. Certification vs. Traceability - What are the differences?
• Registration - Definition of
• Certification - Definition of
• Accreditation - Definition of
• DCP - Dynamic Control Plan - Ford
• Gage and Gauge - Difference between the terms
• Cleanliness standard - What is?
• Availability - Measurability - Manufacturing Process Capability - Definitions
• Critical Supplier - Definition of

vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser