• Hydro test for Process tank as per API 650
• EN 10204 type 3.1 question - Chinese Steel Mill Certificate
• US Standard for Laser Welding of small parts
• NADCAP for machine shops
• NCA 3800 quality system vs. ISO 9001 - Commonalities
• Clarification of ISO 2768-1 - Inside bend radius tolerance - Metal stamped part
• CSA Inspection - Process equipment shipped elsewhere to process product
• Is ISO 10993 100% acknowledged in Japan?
• ITAR Compliance Manual Samples
• Japanese rule on EtO residuals in sterilized medical devices?
• UL (Underwriters Laboratories) vs. CE Marking (Conformité Européene)
• Mean Time Between Failures (MTBF) - SN 29500 Standards?
• Does anyone have any experience with NADCAP?
• EN 10204 Clause 3.1B - Definition, Summary and Form
• Procedure for New Product Introduction (NPI) - Build to print shop
• N 286.1 as it relates to 10 CFR Appendix B Part 50 - Nuclear Requirements
• Equivalent Steel for SPFH 590
• Taiwan GCP for Medical Devices in English
• NSA/CSS Policy Manual No. 3-16
• IPC-Std-610D Component Incoming (Receiving) Visual Inspection
• EN 388 & 374 Standards - Required or Recommended Testing Frequency?
• Penetrant Inspection NADCAP AC7114
• EN 556 European sterilization assurance levels
• KFDA Requirements (Korea) - ISO 13485 - Medical devices
• Canadian Medical Device Reg -- Mandatory Reporting?
• ANSI 14.5M - Dimensioning and Tolerancing - Where I can buy the standard
• ASTM A240 for valve housing
• National Pipe Straight Mechanical (NPSM) Specification?
• Is FMVSS302 equivalent to DBL5307.10
• Old Drawing from the 1940's references A.I. 2400.
• AMS 2750 - Tell me what troubles, specifically, you have had with AMS 2750
• Integrating Q, E & S Management Systems - who is doing it?
• Application of CQI-9 Heat Treat Survey for an Annealing Process - Steel Coils
• TSCA (Toxic Substances Control Act) Inventory List - Details and Samples?
• MQ12005 - Caterpillar Quality Certification Process
• NADCAP AC7108 and Supplements - Audit Observation
• AS9102 Revision A Released - 28 January 2004
• Japan's MHLW #169 vs ISO 13485:2003
• Gap analysis to demonstrate that we comply to CAN3-Z299.3-85
• Which Safety Registration Program to Choose? OHSAS 18001? Z10?
• LEEA examination for lifting equipment
• Ring Joint Gasket Defect Types and their Consequences
• Installation Document that meet NFPA 70 & 72
• NFPA 72 and NFPA 72 Standards - Electrical Installation and Fire Alarm Systems
• International System of Units (SI)
• Noise Thermometry may help redefine International Unit of Temperature
• F97 - An Older English Shipbuilders spec on hoists and cranes?
• DNV Standards for inspecting offshore containers and baskets
• How to get the International Railway Industry Standard (IRIS)
• How to phrase a DFARS compliance statement
• Help with AQAP related Quality Plan in compliance with NATO AQAP 2110 and AQAP 2210
• Microbial Standard for Bacteria, Fungus & Mold for Equipment
• AQL and Sample Size - Section 9.4 of ANSI Z1.4
• Looking to expand into Commercial Nuclear
• Classifying SMD chip resistor and SMD array resistor - Electronic Components
• PED (Pressure Equipment Directive) Certification - We hold an ASME 'S' stamp
• Standards and Norms for Composites used in Vehicles
• American Institute of Steel Construction
• ANSI-Y14.5M vs. ASME-Y14.5M - Does an ANSI-Y14.5M-1994 document actually exist?
• What is this UL document - Is it a Certificate or others?
• Defunct SAC (Semiconductor Assembly Council) Standards
• Formal CS1 Notification Letter Ideas and/or Template needed
• ASM handbook and stahlschlusel ?
• R A value tolerances for stainless steel finishes
• Concept of UL (Underwriters Laboratories) Numbering System - What´s in a UL Number
• Comparison of QMS regulations in US - Japan {21-CFR-820 vs PAL MO #169}
• Cancellation of Specifications - Question regarding cancelled specifications
• About FMVSS302 - What frequency do I have to test burn plastic material
• Resistance Static Testing of Stampings - M.O.ESS.F1B.F185
• Redefining the Kilogram
• Regional/Country Standards & Regulations for Non Dairy Creamer?
• Oxygen Cleaning and Surfactants used for leak detection
• UL & CSA (Canadian Standards Association) Mark - Need to go to both parties for it?
• What is the VDE (VDE Testing and Certification Institute)/UL Program?
• The difference between QA (Quality Assurance) and QC (Quality Control)
• AS9003 and AS9120 - First Accredited Registrars for AS9003 and AS9120.
• AEC Q200 REV C, page 58 of 111, Appendix 2 - PPAP Table Explaination
• FDA Part 820 Audit vs. ISO 9001 - Anything I should be aware of as an auditor?
• J-STD-002 - Japanese Standard - Solderability Tests - Where to find
• Ball Grid Array (BGA) component Incoming Inspection IPC-7095
• How to get a D-U-N-S (DUNS) Number
• Electrical Assembly Standards - IPC-A-610C "Acceptability for Electronic Assemblies"
• Oeko Tex - Certification of ecological textiles without harmful substances.
• BS EN 13012:2001 for petrol pumps - Need to know if Vibration is included therein?
• EN 10247 Laboratory that can perform the non-metallic inclusions test on steel
• Drafting Conventions per ASME Y14.5
• Reporting requirements/method for MIL-PRF-39012 Groups A & B Data
• European/ISO equivalents for ASTM Standards
• 'GO' & 'NO GO' Thread Plug Gage Standard
• Electronics Die Component - Military Standard 883 vs. MIL STD 750 TM2010 B.
• Implementing Kaizen in a Construction Company
• Is there a Kaizen Certification?
• What is the latest version of MIL-T-9047 standard?
• Where I can buy a Jaegar Eye Chart ?
• Looking for MIL-STD-1686B (MIL-STD-1686 revision B)
• Revised Safety Standards - ANSI has Revised the Safety Symbols
• GLP (Good Laboratory Practices) Certification Body
• Is there a JEDEC, EIA or Military standard for Chip Scale Package Inspection Criteria
• Bow Specification For Wood
• EN 10204 3.1B Material Certification and Identification
• ASTM D 380 Clause 16.1 - Methods of Burst Testing Rubber and Plastic Hoses
• Cleanroom Standard for Semiconductor Fabrication Wanted
• Has anyone ever written a Quoting Process?
• ISO 10993-1 (2003) - Chrome Plating Acceptance
• Service Media - Definition in NASA KSC-C-123H - Surface Cleanliness for Fluid Systems
• Organizing Medical Device Requirements - How you carried out yours?
• Why has Nadcap made AMS2750 a requirement for paint/dri-lubes cure ovens?
• UL Certified Isolation Transformer
• Mil Standard for Crimping
• Specification of Raw Materials - Can I accept one based on an earlier Revision?
• Valve Inspection and Testing - API Standard 598
• What is ISO DP 7631/1?
• API ISO/TS 29001 Certification Body in Malaysia
• PRC Safety Quality License (SQL) for boilers and pressure vessels
• ISO 15378 - Gap Analysis With PS 9000:2001- Pharmaceutical Packaging Materials
• Specified Retention Time of PWB (printed wiring board) Test Coupons
• What is PAthfinder Card used in EFQM (European Foundation for Quality Management)?
• ASTM-A-632 Rev 04 - Specification for Seamless and Welded Austenitic Stainless Steel
• CQI-9 or W-HTX - Which heat treating standard is more stringent?
• Acceptance Criteria for Scratches on Base Metal
• UL Approval for Medical Products
• Inspection Criteria for Foreign Objects in LCD Assemblies needed
• Reference Standard for Acceptance Criteria for Validation of a Reagent
• ANSI Y14.5M Absolute Limits and Measurement question
• Question on UL 746D - Is there a need to label each specific part as UL?
• Quality Training Framework (AQTF2007)
• Does anyone know where I can view Bac5300
• CCC (China Compulsory Product Certification) - Registration bodies in North America?
• Looking for some information on Kosher certification (for a mouthwash)
• Automotive Interior Trim - Vibration Standards - Anyone suggest One?
• Translation Of Foreign Language Standards
• Mil Specs (US Military Specifications) ..... FREE in .pdf Acrobat format
• Thickness not exceeding 2±0.3 mm - Value1 < value2±Value3
• I need MIL-DTL-5765 - MIL-STD-5765 F
• Where to get/buy Jedec Std - J-STD-005?
• OHSAS 18001 requirement that PPE follow a national or international standard?
• Units of Measure for Case Hardness such as HV, HRB, HRC, etc.
• Retention Sample Requirements ISO 13485 and 21 CFR Part 820
• New customer service guidelines from BSI - BS 8477
• GME 00004 + GME 60271 - Anyone ever heard of these norms for GM?
• Being Compliant to a Standard vs. Certified (Registered) to a Standard
• ITIL (the OGC's IT Infrastructure Library) Version 3 - Published Today
• Has Anyone Heard of Mil Std 155D?
• Where to find JIS (Japan) Standards
• Testing for toys: what is required for an art stamp?
• What are the Current OHSAS 18001 & ISO 14001 Revisions & Combined Systems
• Is ASME B89.1.5 a standard? Measurement of master discs or cylindrical plug gages
• Nuclear - ASME Section III N-Stamp - Requirements over and above AS9100 and ISO 9001
• Din Standards - DIN 28013 DIN 2605 DIN 2576 DIN 2635 DIN 2616
• Certificate of compliance (C of C) DOD requirements for commercial items in products
• Internal Thread Inspection reference - Actual data vs. Thread Gage
• SAE AS8879 interpretation - Using a Johnson thread gaging system
• Ink / Print Adhesion Standard (ASTM?) - Is there a Relevant Standard?
• Ensure customer confidentiality - TS 16949 Cl. 7.1.3 Confidentiality
• What is a manufacturing plan? What goes into a manufacturing plan?
• Chrysler PS-80 phosphating specification approval
• Management of Change regulations by the US EPA and the US OSHA
• "Cultural compatibility" EFQM excellence model
• Does anyone have a product specification template?
• A questionaire to suppliers regarding the standard SA 8000 needed
• Quality Standard, Requirements & Specifications
• Fate of T&E (Tooling and Equipment) supplement from QS 9000
• How do we obtain the product requirements for UL Approval?
• I am looking for CQI-9 "Heat treat system assessment"
• ANSI B89.1.10, AGD and Mil A-A-2348 Dial Indicator Standards
• What is "CLS"? Mercedes Benz Coupe, Long-wheel base and 'S' class finishing
• UL 746 D - Polymeric Materials - Fabricated Parts - Plastic Injection Moulding
• What do you think of QC080000? Environmental
• Laboratory Accreditation Requirements for US DOT Stackability CFR
• Where can I learn more about IPC-A-610D without training?
• Hardness check - We sometimes use a file to check the suface
• Resistance welding process - Cold rolled and some zinc plated welding
• Ams 7875(pwa53-5)
• ATEX certification of the Quality System
• Electric Signs Certification - UL standards exist - Are there any european ones?
• MIL-HDBK 57B - Listing of Fastener Manufacturers' Identification Symbols
• Labeling requirements when selling products manufactured in China
• Exporting medical devices to Australia - Regulatory system for medical devices
• CCCF - China Approval Agency - Difference of Opinion
• MIL-A-8625 Aluminum Anodizing... Is there another comparable standard?
• Chemical Spectrum Analysis by one of our group companies
• HT2005 for Heat Treating - Has anyone seen a copy of the DRAFT?
• Is there any standard for "Cost of Poor Quality" (COPQ) by ISO
• USCAR (US Standart) vs. AK (German Standart) - Differences?
• ASTM D709 - Does D709 give a wall thickness tolerance for tubing?
• Legal Requirements for Electrical Panel Manufacturing Industry
• Memory Tester Requirements for the US - Electronic Equipment
• Obsolete Standards - Need J 377:1987 SAE standard, where can i get this old one?
• Industry Standard for Brazed Joint Integrity - Customer Specification
• Aluminum T6-T61 Heat Treating - What Info/Std Do I Need?
• Elevated work platforms - No evidence of inspection being performed - Clarification
• Metal Coupon Impact Test
• ASME B&PVC Section VIII Div 1 question regarding "Seal"
• NACE MR0175/ISO 15156 (petrochem industry). Is anyone familiar with it?
• NAS 0331, Method 400
• Desco 06820 ESD Video - Needed
• CQI-9 vs. AMS 2750D - Are there discrepancies?
• Is there an international system standard for producing electrical components?
• How to start OHSAS 18001 and the EMS 14001 implementation?
• Safety requirement for snap-off ID strap - OSHA Requirement?

vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser