• Changes in AS9100 Revision C
• AS9100 & Related Aerospace Standards - List
• New AS9101-The Coordination Draft. Not the Official Release
• Implementing an AS9100 Quality System
• Configuration Management for sub-contractors working to Customer Drawings
• AS9100 aerospace standard in California - Need Help
• Configuration Management Basics - AS9100
• Registrar Registration Certification Fees
• Are ISO 9001:2008 and AS9100:2009 going to be the official dates used?
• Compliance with AS9100 Configuration Management Requirements
• First Article Inspection - FAI for every new product launch
• Lot acceptance when samples have nonconconformities
• Handling drawing notes within AS9102
• Successful AS9100 Audit - Thank You to everyone here
• Meeting AS9100 Clause 7.4.3 e) Delegation of Verification requirements
• Departmental Measurable Objective Needs for AS9100
• Does each shot peening timer require calibration - AS9100 requirements
• Documentation and procedures to support AS9100 Clause 7.1e
• An example of a meaningful preventive action for aero suppliers who use titanium
• Certificate of Conformance/Compliance (CofC) - Share your best business practices
• Periodically validate test reports for raw material - AS9100 7.4.3
• AS9100 - Right of entry requirement
• Stamp Requirements for Paperless Traveler
• OASIS database: approaching the 10,000th certificate
• What is the Best Way to Structure my Approach to Implementing AS9100?
• Risk Management Procedure - Please review
• AS9100 Initial Exposure - Completed my first AS9100 Scope Extension audit
• IAQG Guidance PCAP 001 - Competence Management Guideline
• Configuration, Risk Analysis and Project Management in one procedure
• Supplier Excellence Alliance (SEA) - What is the SEA?
• CB Registration Marks - Use on company letterheads
• AS9102 lapse in production requirements - Customer FAI request
• EASA Part 21 Subpart J – DOA - Here is my understanding of the DOA
• Defining your Scope of Approval - AS 9100 7.4.1(a)
• Outsourcing Special Processes - Clause 7.5.2
• Is there a Specification for safety wire installation - Aerospace, SAE or otherwise
• Is a dual ISO9001 AND AS9100 QMS Feasible?
• FAI Help - Subcontracting out all manufactured items (PCB & machined parts)
• Identification and Traceability requirements - Clause 7.5.3
• Currently implementing Part 145 repair work - CMM (Component Maintenance Manual)
• Control of Non Conforming Product procedure explaining the process for approval
• NonConforming product NCR during Manufacturing vs. NCR only at final inspection
• NC working face have a repair-toolbox in machining.
• Quality Objectives in line and focused with the AS9100 standard
• How maintain an AS9100 QMS that allows us to produce non-AS product
• AMS 4218 Spec, Equivalent
• Added Value of EN9100 Certification for the Business - Aerospace and defence
• Technical Notice vs. Service Bulletin - Definition and differences
• Traceability (Details to assembly/sealant) - AS9100 7.5.3
• AS 9102 requirement for parts that need further treatment such as Anodizing
• AS9102 FAI for Circuit Card Assembly - Measure each hole and document it?
• Have our DOA (EASA Pt21 Subpart J) the authority to audit our suppliers?
• What are the FAI requirements for an assembly? New to AS9102
• Witness Auditor - Should they be listed on both OASIS and RABQSA auditor listings?
• Quality Objectives Vs. Quality Policy - Setting Quality Objectives and Goals
• Should I remove references to AS9120 / ISO 9001 from my Quality Manual and QMS?
• Classifying findings as Major vs. Minor findings in the AS9100 world
• AS9100 - Easier Than TS16949? Spring & Pressing company
• Risk Management - AS9100 revision C - Early advice please!
• Aerospace Supply Chain Management Handbook (SCMH)
• First Article Inspection Reports - Manual assembly of components
• AS9100B Quality Policy - Suggestions needed
• AS9102 Form 2 and Standard Hardware clarification
• AS9100 vs. Boeing D6-82479 - Transition Matrix
• FAI for bulletproof glass normally for autos?
• AS9102 Form - Do you hate it as much as I do?
• Monthly SPC original data sheets - What should be done with the reports?
• Will EN9100 get a reciprocal change?
• Internal Audit - Process based vs. Procedure based
• Analysis of Data (Rookie Auditor Needs Help) - AS 9100 8.4
• AS9100 certification of more then one facility
• 8.3 Non-Conforming Product Aerospace
• Configuration Management Exemption? AS9100
• FDA 21CFR820, ISO13485 and AS9100 co-existence?
• AS9100 in Plain English vs. FAR145, ECAR145 - Seeking Cross Reference Matrix
• What do I need to know in Aerospace? Medical Devices moving to Aerospace
• Is it Compulsory to complete Management Review before Stage 1 Audit?
• AS9100 training required in UK - Urgent
• ISO 9001:2000 vs. AS9100:2004 Rev B Comparison Matrix
• Customer Product or Material - Machining of very expensive material
• AS9102 First Article Inspection - Who signs?
• Should we look at receiving EN9120 EN9130 certification?
• What certification needed when doing Metal Parts for Aerospace Industry?
• Penetrant Inspection NADCAP AC7114
• Control of Production Equipment, Tools and NC Programs: 7.5.1.3
• Send a Supplier an Audit Plan prior to conducting an audit at their premises?
• AS9100 and EN9100 listed on Certificate - European business certificate requirements
• AS 9100 Certification Gap Analysis needed
• Commercial and AS9100 operation
• Can an organization without FAA145/EASA145 certification be certified to AS9110?
• Audit Results Question - Part Characteristics database - Distribution Company
• Configuration Management Process flow
• OASIS database - deadline for setting up an administrator is fast approaching
• Questions in translating AS9104/3 into Chinese
• EASA (European Aviation Safety Agency) Part 21 Subpart G
• Understanding AMS 2750D compliant calibration report - items under 3.2.6.2
• AS9100 Standard in different languages?
• AS9100 timeline from ISO 9001
• AS9100 7.2.2 Review of requirements
• Configuration Audits - Writing a Configuration Managment Work Instruction - AS9100
• Is Airbus enforcing implementation of these other AS/EN standards?
• If Boeing is your customer and you are AS9100 certified, pay attention
• AS9100 comparison with draft changes
• The Aerospace ICOP Scheme - Concerns over the Scheme's Efficacy/Effectiveness
• Rendering Product unusable... if it's owned by the Customer?
• NADCAP and Gap Analysis for a Heat Treating facility
• Approving equipment for welding
• Review My Process Map - Services Company
• Is anyone familiar with PRI - Nadcap?
• Evaluate Compliance to AS9100 Paragraph 7.6
• Difference between Documents and Records? How to control them?
• AS9100 Clause 8.3 "Rendering Scrap Unusable"
• New OASIS database feature - Contact the CB with concerns about a supplier
• Process for Approving Personnel Making Decisions - AS9100 Clause 8.3
• Hoeyster QM - Goal: Eliminate "Final Inspection" - Aerospace precision machining
• Planning vs. Quality Buyoff - AS9100
• How make the objective evidence for the control of Foreign object damage?
• Measurement, Analysis and Improvement - General Questions
• Suggestions for: Control of Monitoring and Measuring Devices? (see 7.2.1) (1)
• Control of Work Transferred, On a Temporary Basis, Outside the Organization’s Facilit
• Preservation of Product - Service Industry - AS9100 Clause 7.5.5
• Control of Production Equipment,Tools and Numerical Control (N.C.) Machine Programs
• ISO9001:2000 vs. TS16949 vs. AS9100 - Differences and General Questions
• FAIR (First Article Inspection Report) for Engineering Services Organisations needed
• What Defines “Flight hardware?”
• Service Organization - Which Standard?
• Is Disposition Applicable if We are in the Service Side of the Industry?
• Authority for Disposition of Nonconforming Product - AS9100
• AS9100 certification first time through
• Approving Suppliers - Consultants
• Required number of auditor days (Audit Man-Days) for AS9100
• AS 9100 Awareness Training Material
• Airbus AP1003 (environment) form filled in
• ISAGO - IATA Safety Audit for Ground Operations
• Purchase Order (PO) Quality Clauses - AS9100 7.4.2 Purchasing Information
• AS9102 FAI Reports. Need for Standard Parts?
• Special Processes - Qualification and approval prior to use.
• AS9100 Audit Coming up and We are Behind in a Few Areas!
• Sample Failure/Qualification Test Failure? - A few units were tested many years ago!
• Sec 5.3 Quality Policy (Objectives)
• AS9100B - 4.3 Configuration Management - What do I do?
• Upgrading from ISO9001:2000 to AS9120 - Difficulties?
• AS 9100 Clause 7.1 thru 7.2.2 - Examples of related documents
• Approving Suppliers under 7.4.1 - AS9100
• Example for Key Characteristics - AS/EN 9100 Clause 7.3.3
• AS9110 Requirement - Who requires the AS9110 standard?
• AS9100 Clause 7.5.1.5 - Control of Service Operations - We do not do servicing
• PCDMIS Fair Populating Software, Anyone Use It ??
• Control of CNC Machine Programs in Engineering Workshops (Aerospace, AS9100)
• AS9100 Registrar Accreditation Audit Tips - Accreditation audit witnessed by ANAB
• Clarification on the Interpretation of a Few AS9100 Clauses
• AS 9100 Applicability - Environmental Chambers and Vibration Systems Manufacturer
• Validation Of Outsourced Special Processes under AS9100
• First Article Applicability - All parts produced or just the Aerospace parts?
• AS9100 Certification Process
• Getting started (beyond the standard) and getting up to speed with AS9100?
• AS9100 Clause 7.4.3 Verification of Purchased Product (audit Finding)
• How to become approved supplier by Sikorsky Helicopter?
• AS 9100 Certification Details
• Is First Article Inspection considered "Sampling"?
• AS9100/AS9006 process documentation - Aerospace software consulting company
• AS9100B Cl 7.5.1.3 - How to comply with validation of production tools requirement?
• Validation of Production Equipment, Tools, NC Programs - AS9100B Clause 7.5.1.3
• Overcoming Management Misunderstanding - QMS not fully functioning
• Boeing Letter Re: AS9003 and ICOP - D6-82479, Boeing Quality Management System (BQMS)
• Deployment of AS9110 - What are your thoughts?
• Configuration Management Audit Sample?
• AS9100 Lead Auditor Requirements
• Configuration Management, Need to review ISO 10007, anybody have one?
• Nonconformity Caused by Human Error - How to make a Corrective Action?
• AS9100 Getting Started - What time frame /cost / major obstacles can we expect
• Has AS9120:2002 been replaced by AS9120:2005?
• Material Dispositioned for Scrap Positively Controlled - AS9100 Clause 8.3
• Job Router examples? - Job routing systems small aerospace jobbing shops use
• Getting the most current Boeing Specifications
• Scope of approval portion of AS9100 section 4.6, 04 (AS 9101, sec 4.6.2, Q4)
• Is Checklist Required for Internal Audits - AS9101
• Integrating EN ISO 9001 with JAA Regulations, QS, CAMO & MRO (Aviation Regulations).
• AS9100:2004 Checklist needed
• FAI (First Article Inspection) for Chemical companies
• What are Variable Measurements - EN 9100 Clause 7.5.1
• AS9120 Request
• ISO 9000 vs. AS9100 in a Local Fabrication and Machine Shop
• Are FIR's performed per AS9102, either at Tier 2 or from Tier 3's?
• AS9102 First Article Inspection Requirements Flowdown to Suppliers
• Can we provide full traceability in our certs while protecting our supplier base?
• Service Company dealing with FAI requirements - Small stocklist broker
• Interpretation of AS9100 Clause 8.2.4.1.d Inspection Documentation
• Creating a New QMS (Quality Management System) from Old
• Extension of Measurement Device Calibration Due Date.
• Benefits of AS9100 Certification vs. Cost of AS9100 Certification
• Can I exclude Service even though we do some service?
• From TS 16949 to AS 9100 - Any Views, Experience and Gap Analysis Tool to share?
• Intended Applicability of the Aerospace 91XX Standards
• Help needed with brilliantly engineered FAI (First Article Inspection) form 3
• AS9100 for 'Non Production Part' Company - We make check fixtures
• Production Accountability - Instilling Quality Values in the Production Workers
• AS 9100 vs. EN 9100 - What AS 9100 issue is EN 9100:2003 is based on?
• Quality of Product Metric for AS9100 Rev.C
• Explain the meaning of 8.2.4 Monitoring and Measurement of Product

vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser