The Elsmar Cove Wiki More Free Files The Elsmar Cove Forums Discussion Thread Index Post Attachments Listing Failure Modes Services and Solutions to Problems Elsmar cove Forums Main Page Elsmar Cove Home Page

Go Back   The Elsmar Cove Forum > ISO (International Organization for Standardization) Standards > ISO 17025 - General Metrology, Measurement Device, Calibration and Test Laboratories > ISO 17025 and related Metrology Topics - Measurement Devices, Calibration and Test Laboratories
Reload This Page Full Scale Tolerance - How to apply full-scale accuracy specification to a gage?
Forum Username
Register Photo AlbumsBlogs FAQ Social Groups Calendar Search Today's Posts Mark Forums Read


Elsmar Cove Forum Sidebar
Custom Search
Monitor the Elsmar Forum
Monitor New Forum Posts
Follow Marc & Elsmar
Elsmar Cove Forum RSS Feed  Marc Smith's Google+ Page  Marc Smith's Linked In Page   Marc Smith's Elsmar Cove YouTube Page  Marc Smith's Facebook Page
Elsmar Cove Groups
Elsmar Cove Google+ Group  Elsmar Cove LinkedIn Group  Elsmar Cove Facebook Group
Sponsor Links







Donate and $ Contributor Forum Access
Sponsored Links
Courtesy Quick Links

Links that Elsmar Cove visitors will find useful in your quest for knowledge:

Howard's
International Quality Services

Atul's
Symphony Technologies

Marcelo Antunes'
SQR Consulting

Bob Doering's
Correct SPC - Precision Machining

NIST's Engineering Statistics Handbook

IRCA - International Register of Certified Auditors

SAE - Society of Automotive Engineers

Quality Digest Portal

IEST - Institute of Environmental Sciences and Technology

ASQ - American Society for Quality
 
 
Thread Tools Search this Thread Rate Thread Content Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 29th July 2004, 12:57 PM
e006823 e006823 is offline
Involved in Discussions

 
Registration Date: Nov 2003
Location: East Coast
  
Posts: 162
Thanks Given to Others: 2
Thanked 37 Times in 25 Posts
Karma Power: 56
Karma: 454
e006823 is appreciated, and has over 400 Karma points.e006823 is appreciated, and has over 400 Karma points.e006823 is appreciated, and has over 400 Karma points.e006823 is appreciated, and has over 400 Karma points.e006823 is appreciated, and has over 400 Karma points.
Question Full Scale Tolerance - How to apply full-scale accuracy specification to a gage?
Can someone explain to me how you apply full-scale accuracy specification to a piece of equipment? For example a flow meter, with accuracy specified as +/- 1% full scale, does this mean that when reading at 50% of scale I apply +/- 1% of the full scale tolerance to the results?

Thanks,
Bob
 

Lower Navigation Bar
Go Back   The Elsmar Cove Forum > ISO (International Organization for Standardization) Standards > ISO 17025 - General Metrology, Measurement Device, Calibration and Test Laboratories > ISO 17025 and related Metrology Topics - Measurement Devices, Calibration and Test Laboratories
Reload This Page Full Scale Tolerance - How to apply full-scale accuracy specification to a gage?

Do you find this discussion thread helpful and informational?


Bookmarks

« Previous Thread | Next Thread »

Visitors Currently Viewing this Thread: 1 (0 Registered Visitors (Members) and 1 Unregistered Guest Visitors)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Forum Search
Display Modes Rate Thread Content
Threaded Mode Threaded Mode
Rate Thread Content:

Forum Posting Settings
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Discussion Threads
Discussion Thread Title Thread Starter Forum Replies Last Post or Poll Vote
Conductivity Meter Specification - What Is Accuracy +/- 1% Full Scale + 1 digit Dongzkie ISO 17025 and related Metrology Topics - Measurement Devices, Calibration and Test Laboratories 9 9th October 2011 07:22 AM
How to understand the "full scale peak-to-valley output" mentioned in IEC 60601-2-27 raymond02302 IEC 60601 - Medical Electrical Equipment Safety Standards Series 4 23rd May 2011 05:42 AM
Gage R&R Total Tolerance question - Use the full process tolerance? 02SCvette Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10 4th August 2008 10:18 AM
Digital Caliper Calibration vs. Verification - Full Scale vs. Used Range JSmith ISO 17025 and related Metrology Topics - Measurement Devices, Calibration and Test Laboratories 8 7th January 2005 02:06 PM
Determining Weighing / Counting Scale Tolerance - No manufacturer specification etdiyas ISO 17025 and related Metrology Topics - Measurement Devices, Calibration and Test Laboratories 24 4th September 2003 02:25 PM



The time now is 04:06 AM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.

Contact Marc - Elsmar Cove Home Page - Privacy & DMCA/Copyright Information - Terms of Service - Top

   


Marc Timothy Smith - Elsmar.com
8466 LeSourdsville-West Chester Road, Olde West Chester, Ohio 45069-1929
513 341-6272