Where do I get a good book on "Design for Manufacturability"?

kedarg6500

Quite Involved in Discussions
Hello everybody

Can any one share
1. A good handbook on "design for manufacturability "
2. GE's internal guide on ?manufacturing producibility handbook"?
a. where we can get it?

Kedar
 

outdoorsNW

Quite Involved in Discussions
Re: Where do I get a good book on "Design for Manufacturability" ?

Kendar,

What kind of products are you interested in?

What manufacturing processes are used (or are being evaluated) to make the products?

DFM can vary quite a bit by industry and manufactuing process.

Tom
 

kedarg6500

Quite Involved in Discussions
Re: Where do I get a good book on "Design for Manufacturability" ?

What kind of products are you interested in?
= A guidelines hand book

What manufacturing processes are used (or are being evaluated) to make the products?
= We manufacture hermatically sealed compressor

I hope I have answered your questions
 

John Broomfield

Leader
Super Moderator
Re: Where do I get a good book on "Design for Manufacturability" ?

kedarg,

I would recommend this book on DFM.

Mainly because I admire the work of its author.

John
 
Y

yaozhigang

Re: Where do I get a good book on "Design for Manufacturability" ?

it's just a reference book for those practicing or have interest in design for manufacturability
 

somashekar

Leader
Admin
Re: Where do I get a good book on "Design for Manufacturability" ?

What manufacturing processes are used (or are being evaluated) to make the products?
= We manufacture hermatically sealed compressor
While books have the highest position in being the bank of knowledge, I will recommend a good and thorough design review with several manufacturing personnel / several service personnel to bring out all possible knowledge and experience to the forefront to consider manufacturability in designs.
 
Top Bottom