The Elsmar Cove Forum How to calculate the sigma level of a process and Relationship of DPMO
 Forum User Name Keep Me Logged In Password
 Register Photo Albums Blogs FAQ Registered Visitors Social Groups Calendar Search Today's Posts Mark Forums Read

 Search the Elsmar Cove @import url(http://www.google.com/cse/api/branding.css); Custom Search Monitor the Elsmar Forum Monitor New Forum Posts Follow Marc & Elsmar Elsmar Cove Groups Donate and \$ Contributor Forum Access Courtesy Quick Links Links that Elsmar Cove visitors will find useful in your quest for knowledge: Howard'sInternational Quality Services Marcelo Antunes'SQR Consulting Bob Doering'sCorrect SPC - Precision Machining NIST's Engineering Statistics Handbook IRCA - International Register of Certified Auditors SAE - Society of Automotive Engineers Quality Digest Portal IEST - Institute of Environmental Sciences and Technology ASQ - American Society for Quality

#1
21st April 2005, 11:41 AM
 jackylpt Involved - Posts   Registration Date: Aug 2004 Location: Canada / Toronto Posts: 38 Thanks Given to Others: 0 Thanked 0 Times in 0 Posts Karma Power: 44 Karma: 10
How to calculate the sigma level of a process and Relationship of DPMO

Hi there,

Now the six sigma is buzzword in many area. My question is how to calculate process sigma level.

For exmaple, suppose there is no shift in process, our process means is 100, taget is also 100,process sigma(by R/d2 calculating) is 1.8, specification is 90--110,

Question1: how to calculate sigma level?
is it (110-90)/6*1.8?
Question2: now I am also confusing how to calculate the cpk of this ?

thanks

michael

#2
24th April 2005, 01:14 PM
 Bob Ablondi Involved - Posts   Registration Date: May 2002 Location: USA Age: 89 Posts: 46 Thanks Given to Others: 0 Thanked 1 Time in 1 Post Karma Power: 54 Karma: 15
Calculating sis sigma

The calculation of a Sigma level, is based on the number of defects per million opportunities (DPMO).

In order to calculate the DPMO, three distinct pieces of information are required:
a) the number of units produced
b) the number of defect opportunities per unit
c) the number of defects

The actual formula is:

DPMO = (Number of Defects X 1,000,000)

((Number of Defect Opportunities/Unit) x Number of Units)

Example:

A manufacturer of computer hard drives wants to measure their Six Sigma level.
Over a given period of time, the manufacturer creates 83,934 hard drives.
The manufacturer performs 8 individual checks to test quality of the drives.
During testing 3,432 are rejected.

Defects 3432 DPMO 5111.158768
Opportunities 83934 Sigma Level 4.1
Defect Opportunities per unit 8

Six Sigma Table: 1 690,000
2 308,000
3 66,800
4 6,210
5 320
6 3.4

__________________

#3
25th April 2005, 12:42 AM
 Marc Your Elsmar Cove Host   Registration Date: Jan 1996 Location: West Chester - Southern Ohio - USA Age: 64 Posts: 24,152 Thanks Given to Others: 9,598 Thanked 5,257 Times in 3,319 Posts Blog Entries: 4 Karma Power: 400 Karma: 32427
Thanks for the help on this one, Bob!

__________________

A Search is a terrible thing to waste!
One Test is Worth 1000 Expert Opinions - The plural of anecdote is not data - Correlation does not imply Causation
We can't solve problems by using the same kind of thinking we used when we created them. - Unknown
#4
27th April 2005, 11:57 AM
 jackylpt Involved - Posts   Registration Date: Aug 2004 Location: Canada / Toronto Posts: 38 Thanks Given to Others: 0 Thanked 0 Times in 0 Posts Karma Power: 44 Karma: 10
Quote:
 In Reply to Parent Post by Bob Ablondi The calculation of a Sigma level, is based on the number of defects per million opportunities (DPMO). In order to calculate the DPMO, three distinct pieces of information are required: a) the number of units produced b) the number of defect opportunities per unit c) the number of defects The actual formula is: DPMO = (Number of Defects X 1,000,000) ((Number of Defect Opportunities/Unit) x Number of Units) Example: A manufacturer of computer hard drives wants to measure their Six Sigma level. Over a given period of time, the manufacturer creates 83,934 hard drives. The manufacturer performs 8 individual checks to test quality of the drives. During testing 3,432 are rejected. Defects 3432 DPMO 5111.158768 Opportunities 83934 Sigma Level 4.1 Defect Opportunities per unit 8 Six Sigma Table: 1 690,000 2 308,000 3 66,800 4 6,210 5 320 6 3.4
Dear Bob,

thank you so much for your infomation. I have anther way to calcuate it, but the result is different. Would you please give me some suggestion?

DPU: 3432/83934=0.0408
Y=FPY=e(-DPU)=e(-0.0408)=0.96
probability of a defect {P(d)}=1-Y=1-0.96=0.04
using Z value table is 1.75 sigma

so it is different.

thanks

Michael
#5
27th April 2005, 05:04 PM
 Bob Ablondi Involved - Posts   Registration Date: May 2002 Location: USA Age: 89 Posts: 46 Thanks Given to Others: 0 Thanked 1 Time in 1 Post Karma Power: 54 Karma: 15
Quote:
 In Reply to Parent Post by jackylpt Hi there, Now the six sigma is buzzword in many area. My question is how to calculate process sigma level. For exmaple, suppose there is no shift in process, our process means is 100, taget is also 100,process sigma(by R/d2 calculating) is 1.8, specification is 90--110, Question1: how to calculate sigma level? is it (110-90)/6*1.8? Question2: now I am also confusing how to calculate the cpk of this ? thanks michael
The method shown is with a plus/minus 1.5sigma shift based on Motorola's allowance for process variation in manufacturing.

Bob

__________________

#6
27th April 2005, 05:28 PM
 Tim Folkerts Super Moderator   Registration Date: Sep 2003 Location: Kansas, USA Age: 51 Posts: 975 Thanks Given to Others: 29 Thanked 366 Times in 218 Posts Karma Power: 153 Karma: 5879
That pesky 1.5 sigma shift sure makes life difficult! And the question of what an "opportunity" is!

There is a "Sigma calculator" you can use at

If you have a situation with...
* 83934 units
* 3432 defective units
* each unit is 1 opportunity

Then you have 4.1% defective = 41,000 DPMO. The calculator above says that if the process is centered then this is a 1.74 sigma process. Using the "standard" 1.5 sigma shift says this is a 3.24 sigma process. (these numbers aren't too hard to come up with - they assume a normal distribution that would produce a similar number of defects at the closer spec limit.)

If you considered each test as an opportunity, then you would have 8 times as many opportunities, and a correspondingly better sigma value.

For the example you gave, with x-bar=100, limits at 90 & 100, and sigma = 1.8, you are currently (110-100)/1.8 = 5.56 sigma from the closest spec limit. However, since the "standard" calculation assumes that the process might drift 1.5 sigma, i.e the center might drift by 1.8*1.5 = 2.7. You would then be only (110 - 102.7)/1.8 = 4.06 sigma from the closer spec limit. This would, I believe, be the "official" sigma level for the process.

Tim F

__________________

To wonder is to begin to understand.
#7
6th July 2005, 10:30 PM
 Arvind E-Mails Invalid or Rejected by Recipient System   Registration Date: Oct 2004 Location: Canada Posts: 58 Thanks Given to Others: 0 Thanked 3 Times in 3 Posts Karma Power: 0 Karma: 24
Calculation of sigma from DPMO for defects < 55 %

#8
1st August 2008, 05:27 PM
 CarlosDelgado - 2008 E-Mails Invalid or Rejected by Recipient System   Registration Date: Jul 2008 Location: PERU Posts: 2 Thanks Given to Others: 0 Thanked 0 Times in 0 Posts Karma Power: 0 Karma: 10
Re: How to calculate the sigma level of a process and Relationship of DPMO

Quote:
 In Reply to Parent Post by Tim Folkerts That pesky 1.5 sigma shift sure makes life difficult! And the question of what an "opportunity" is! There is a "Sigma calculator" you can use at http://www.isixsigma.com/sixsigma/si...asp?m=advanced If you have a situation with... * 83934 units * 3432 defective units * each unit is 1 opportunity Then you have 4.1% defective = 41,000 DPMO. The calculator above says that if the process is centered then this is a 1.74 sigma process. Using the "standard" 1.5 sigma shift says this is a 3.24 sigma process. (these numbers aren't too hard to come up with - they assume a normal distribution that would produce a similar number of defects at the closer spec limit.) If you considered each test as an opportunity, then you would have 8 times as many opportunities, and a correspondingly better sigma value. For the example you gave, with x-bar=100, limits at 90 & 100, and sigma = 1.8, you are currently (110-100)/1.8 = 5.56 sigma from the closest spec limit. However, since the "standard" calculation assumes that the process might drift 1.5 sigma, i.e the center might drift by 1.8*1.5 = 2.7. You would then be only (110 - 102.7)/1.8 = 4.06 sigma from the closer spec limit. This would, I believe, be the "official" sigma level for the process. Tim F
I cant accept your apreciation as simple as you say

If is a continuous process, How do you calculate DPMO ..... its depen of the kind of the testing, testing frecuency ........... for me yield must be equal to sigma levels in cetered, normal distribution variable ................... if that we can use the same formula said (Upper Level less media)/sigma.......... we must say exactly what we got real in our process and it work for us ........ theory is not required please...... I dont know if you get my email but is carlos.delgado@ca.sabmiller.com and cdelgadonieto@yahoo.com........... whenever you want to dicussed it please send it ....... if you know about 6sigma and know your process we can learn join

Best regards

 The Elsmar Cove Forum How to calculate the sigma level of a process and Relationship of DPMO

 Bookmarks

 Visitors Currently Viewing this Thread: 1 (0 Registered Visitors (Members) and 1 Unregistered Guest Visitors)

 Forum Posting Settings You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

 Similar Discussion Threads Discussion Thread Title Thread Starter Forum Replies Last Post or Poll Vote Black Belt Auditor Six Sigma 17 8th June 2010 05:46 PM Stephane Dubreuil Six Sigma 8 19th June 2009 12:57 PM Przemek Six Sigma 2 24th April 2009 06:23 PM jackylpt Six Sigma 5 25th October 2005 05:26 AM jackylpt Six Sigma 3 24th July 2005 05:26 PM

The time now is 12:38 AM. All times are GMT -4.

 The Deming PDCA Cycle ISO 9001 QMS Implementation FMEA Information APQP Information Auditing Information 8-D Problem Solving Statistics Error Proofing (Poka Yoke) Brainstorming Identifying Waste Pull Systems Lead Time Reduction Planned Maintenance Quick Setup Discovering Change Process Capability - Cp vs. Cpk Histogram Animation Process Loop Animation Taguchi Loss Function Fishbone / Cause and Effects Animation

Marc Timothy Smith - Elsmar.com
8466 LeSourdsville-West Chester Road, Olde West Chester, Ohio 45069-1929
513 341-6272