The 2nd printing of the AWS D17.1 2010 which was 2011 - Page missing?

W

weldins

In the 2nd printing of the AWS D17.1 2010 which was 2011 the PQR suggested form seems to have a page missing. My thought is that the WPS suggested form is the first page of the PQR.
Does anyone have the same or different thoughts?

AS well 5.3.3.1 states t thickness is .067 to 4t except where t is 1" or over then .067 to unlimited. The question is if t is below .067 then what is the range?

Thanks
weldins
 

mwccwi

Martin MC Weldtech AWS CWI/CWE, ACCP LVL II VT DT
It looks as if this post has been here a while with no response.
It would seem to me that your trouble is in how you reading it, You wrote “AS well 5.3.3.1 states t thickness is .067 to 4t except where t is 1" or over then .067 to unlimited. The question is if t is below .067 then what is the range?”.
You should have read -AS well 5.3.3.1 states t thickness is .067t to 4t except where t is 1" or over then .067t to unlimited. The question is if t is below .067 then what is the range?
The answer is 1” X 0.067 to unlimited.
 
Top Bottom