Automotive Physical Testing Methods (Norms) and Requirements

Hi, good day!

I'm starting to do physical testing for automotive division, we are Tier 3 and our customers are requiring do the lab test according the automotive standars, I asked already to my customer if they do have this information, but they didn't have them because they supply my material to other place. My question for you all is that if someone can provide me the next information:

GMW FORD CHRYSLER VW GMW3182 FLTM BN 106-01 DIN EN 12127 DIN EN ISO 5084 GMW 4090 ASTM D3887 DIN EN 14971 GMW 3010 ASTM D5034 grab method, speed 305mm/min (average 5 samples each direction) DIN EN ISO 13934-1 *elongation @50N & at break GMW 3010 (50N) SAE J1885 PV 3909 FLTM BN 105-01 TL 522 54 / DIN 53377 GMW 3208 SAE J948 (500g, CS-10,150cycles) (BONDEADA) TL 522 54 GMW3326 (trapezoid method) ASTM D1117 DIN EN ISO 13937-2 ISO 105-X12 FLTM BN 107-01, AATCC eval. procedure 3 DIN EN ISO 105-X12 GMW 14102 PV 3922 GMW 3232 ISO 3795 / SAE J369 TL 1010/FMVSS 302 GMW 3220 FLTM BN 151-05 DIN 53 357 SAE J1885, ISO 105-A02, AATCC evaluation Procedure 1 PV 1303 FLTM BN 117-03 method A FLTM BN 112-08 FLTM BN 119-01 FLTM BO 131-01 SAE J1756 PV 3015

Please, if somebody can share with me this information will be a great help, other wise, can you tell me where I can get it!?

Thank you.

MM

That's a list of customer specific requirements and various other standards. We don't have those posted here - You have to buy them and get the CSRs from either the companies themselves or through your customer.