5
56flh
I have a good understanding of calibrating OD micrometers, but I'm a little unsure about pitch mics.
The preparation would be the same for OD mics and pitch mics, but the anvils of a pitch mic are removeable/interchangeable so do each pair of anvils have to be certified as a set? When using a pitch mic, it is set up based on zeroing the mic with the anvils closed.
The preparation would be the same for OD mics and pitch mics, but the anvils of a pitch mic are removeable/interchangeable so do each pair of anvils have to be certified as a set? When using a pitch mic, it is set up based on zeroing the mic with the anvils closed.