I would like to implement ISO 2859 standard for Incoming (Receiving) Inspection

tahirawan11

Involved In Discussions
Hi,'

I am working in a blade manufacturing company for Wind turbine industry, i would like to implement ISO 2859 standard for incoming inspection. Can anyone suggest me how should i implement the subject standard, such as by doing gap analysis etc
 
V

Vassilis

Re: I would like to implement ISO 2859 standard for incoming inspection

This ISO standard ( ISO 2859) is equivalent to MIL-STD-105E used for inspection of incoming materials.
There are 5 steps for implementing the above mentioned standard.

1. Define code letter ( A, B, C ) by the use of the table I in relationship to Lot size ( number of incoming parts per batch)
2.Define A.Q.L ( Acceptable Quality Level ) ( usually it is defined after agreement between customer and producer)
3.Define inspection type ( normal , reduced , tightened). Usually the inspection begins with normal inspection and after the inspection of some Lot's it is transformed, according to the inspection results , to reduced or tightened.
4.Define sampling type ( simple , double , repeated)
5. Use of appropriate table ( ISO 2859) for sampling plan identification.

I hope that i have helped you...:bigwave:

Vassilis
 

tahirawan11

Involved In Discussions
Re: I would like to implement ISO 2859 standard for incoming inspection

Thanks Vassilis,

my life is a bit easier now.
 
Top Bottom