New Folks - Please Take a Minute & Introduce Yourself/Say Hello! (2009 - 8/2010)

[Stijloor]

In Reply to Parent Post by Jefry

Hi..my name is fairuz. I'm working in GMS, M'sia as a sales executives. I'm new in this Quality issue. I'm looking for ISO flowchart and procedure for my company machine job shop (5-10 machinist). Hope our friend out there can help me to solve this problem. Thanks in advance

Hello Jefry, and welcome to The Cove Forums!

Thank you for your first post. This is the introduction Forum. If you have a specific question, please feel free to post your question in the appropriate Forum.

Stijloor, Forum Moderator.

[glnn78]

Hi all,
My name is Glenn, I have worked in the automotive leather bussiness for 20+ years now starting in manufacturing and then in technical managment, working closely with the quality group.

I am currently consulting for a Tannery, assisting in setting up a quality and enviromental system (from scratch) . I have some experince in internal auditing but should have listened a little better to my peers when they were getting prepared for the TS 16949 and 140001 audits.

This web site is awesome as far as the information I have recieved here it is a great help.

Regards to all.
Glenn

[NHopkins]

1. My name is Nick Hopkins
2. QHSE/Purchasing/Inventory Manager
3. GOM Oilfield, Subsea controls, Chemical Injection
4. Stella Maris, lafayette louisiana
5. Spent 2 years as a DNV cert Auditor with another company but took over this position about 1 year ago.
6. Most of my oilfiled experience was on the other side of the fence, purchasing/inventory control, foreman...etc so I have a great dedication to keeping this QMS as simple and "plain english" as possible.
7. My pet peeve when is comes to quality is that our company is young, 4 years, and never really worked a QMS before, so there's allot of uphill fighting to be done.
8. If you could change the world of quality, what would you do? Cut allot of the repetition out. Make it clean and effecient and clearly understood.

Really glad to have lucked upon this place. Seems like every question I have there's an answer hanging about from someone in the same boat.

[clintm6]

Hi all from the soggy, dismal, dreary, Pacific Northwest! (Only about four more months of rain to go till summer!)

1. Name: Clint Mann
2. Job Title or explanation of what you do: Quality Manager
3. Industry you're in or have been in: Currently in aviation manufacturing
4. Company you work for and location: Oregon Aero, Inc. located in the PNW as mentioned earlier!
5. Length of time in quality function: Been in quality for 25 years, more or less
6. Something personal that sets you apart: I'm an optimist, really
7. Your pet peeve in quality (pet peeve is a minor annoyance that can instill a great level of frustration): Everyone thinks quality is my job, alone, by myself, the Quality Guy...
8. If you could change the world of quality, what would you do?: Give all of us an across the board 10% raise, corner office with great view (and sunshine!), and the respect that we deserve for trying to keep our companies running (and the bosses out of jail!)

That's it for now, I have to get up and move around every so often because up here all stationary things tend to grow mold, rust, or other things to horrible to mention....

Clint

[williamv]

1. Name - William Villet
2. Job Title - QA Co-ordinator and Occupational Health and Safety
3. Industry - Duck Processing and Breeding
4. Company - Luv-A-Duck
5. Length of time in quality function - 15 years - 12 years fishing industry including a fair bit of sea time, 3 years biscuits manufacturing and recently joined a duck processing company.
6. Something personal that sets you apart - I support the Springboks, enjoy my sailing, yet live in the middle of Victoria, Australia
7. Your pet peeve in quality - lack of commitment by all management
8. If you could change the world of quality, what would you do? Ensure that each manager reads the QM thourougly, get them to sit a 10 hour exam and make them reaslise that they are responsilbe for the possible hospitalisation, if not death, of others.

[illanrob]

I have really gotten a lot out of this forum and all of you who participate. I was curious, though, who all of you are and what you do. How about letting us know a little bit about you and your background?

1. Name: Robert Illan
2. Job Title or explanation of what you do: Sr Reliability Eng.
3. Industry you're in or have been in: Aerospace
4. Company you work for and location: ARES Corporation Huntsville, AL
5. Length of time in quality function: 15yrs
6. Something personal that sets you apart: Own 2 surfboards east and west coast
7. Your pet peeve in quality (pet peeve is a minor annoyance that can instill a great level of frustration): Colleagues concerned with their own job security
8. If you could change the world of quality, what would you do? Assure that they all have manufacturing floor experience

[Stijloor]

Welcome to all our new Members!

Glad you found us! We look forward to your questions and answers.

Please read the post from our host, Mr. Marc Smith.

Stijloor, Forum Moderator.

[wiwi6910]

1. Name: William Guo
2. Job Title or explanation of what you do:*Sr Quality engineer.*
3. Industry you're in or have been in: *Automobile*
4. Company you work for and location: *Beijing D&W consultant compant, in Beijing China*
5. Length of time in quality function: *20yrs*
6. Something personal that sets you apart: *Enjoy to sing at Karaoke*
7. Your pet peeve in quality *I bought one parts for German, but the quality is no good, as I was busying for another project, didn't to check it. My colleague went to there and feedback to me, it's ok. but when these parts arrive German, they aren't meet specification. too pity*
8. If you could change the world of quality, what would you do? *Trainig all level managers , no quality no result.