Slide 76 of 262

This is meant to give you a basic idea of the intention / requirements. A detailed discussion is presented in Clause_Interp_and_Upgrading.doc.

7 PRODUCT REALIZATION

7.1 Planning of Product Realization

Also see: 5.4.1

The product is either a physical product, software, a process, or a service. In section 7.1 we look at the requirements for planning the realization of your product. Therefore, the actual method will be greatly affected by the type of product you produce. For example, a bank provides mostly services. They would plan the process of delivering the service.

In most cases, you begin with a Quality Plan. This is the same type of Quality Plan called for in TS 16949. You need to flowchart the realization of your product through time and tasks. To this you add the quality objectives, verification methods, criteria for acceptance, and the records to be maintained. Throughout, the goal is to assure yourself that the objectives are being met and the product you intended is the product you produced.

	The Deming PDCA Cycle	QMS Implementation	FMEA Information	APQP Information
Auditing Information	8-D Problem Solving	Statistics	Error Proofing (Poka Yoke)	Brainstorming
Identifying Waste	Pull Systems	Lead Time Reduction	Planned Maintenance	Quick Setup
Discovering Change	Process Capability - Cp vs. Cpk	Histogram Animation	Process Loop Animation	Taguchi Loss Function
		Fishbone / Cause and Effects Animation

Forums and Site Provided and Maintained by Marc Timothy Smith