Posts: 275
From:ILLINOIS
Registered: Mar 2000

posted 02 May 2001 02:31 PM               

---

Every so often you run into a Spec identifier that you havent delt with.

Does anyone have information on standard reference DIN 936 ?
(assuming it has to do with Thread size manufacture)

It MAY have a comparable ISO standard but we have found no clear information on it as yet.

Reagrds
JIm

IP: Logged

Posts: 46
From:Romulus, MI, USA
Registered: Feb 2001

posted 02 May 2001 03:50 PM               

---

Jim
This spec is for metric hex jam nuts class 6s plain finish steel. The DIN specs are produced in Germany. Sorry but I do not know of an English source.

Greg

IP: Logged

Posts: 26
From:Jeffersonville, IN
Registered: Dec 2000

posted 02 May 2001 04:20 PM               

---

The full title is "M8 to M52 and M8 X 1 to M52 X 3 Hexagon Thin Nuts"

It is withdrawn with no superceding document.

You can purchase it from Global Engineering Documents http://global.ihs.com/ for $78.

IP: Logged

Posts: 275
From:ILLINOIS
Registered: Mar 2000

posted 03 May 2001 07:11 AM               

---

Thanks for your help - will be much easier to proceed with the info yu gave us.

Regards
Jim

IP: Logged

Posts: 275
From:ILLINOIS
Registered: Mar 2000

posted 03 May 2001 07:13 AM               

---

Thanks folks - our inspection staff now at least can find what they need.

Regards
Jim

IP: Logged

All times are Eastern Standard Time (USA)