The Cove Business Standards Discussion Forums
Please read this thread...
Software update
Monitor the Elsmar Forum
Courtesy Quick Links

Links Elsmar Cove visitors will find useful in the quest for knowledge and support:

Jennifer Kirley's
Conway Business Services

International Quality Services

Marcelo Antunes'
SQR Consulting, and
Medical Devices Expert Forum

Bob Doering
Bob Doering's Blogs and,
Correct SPC - Precision Machining

Ajit Basrur
Claritas Consulting, LLC

International Standards Bodies - World Wide Standards Bodies

AIAG - Automotive Industry Action Group

ASQ - American Society for Quality

International Organization for Standardization - ISO Standards and Information

NIST's Engineering Statistics Handbook

IRCA - International Register of Certified Auditors

SAE - Society of Automotive Engineers

Quality Digest

IEST - Institute of Environmental Sciences and Technology

Single Post View
Old 13th February 2018, 01:30 PM

Total Posts: 1,433
Re: Producing IATF 16949 compliant calibration certificates

You are going to have a real problem here. In general outside calibration labs must be 17025 certified -- so most customer are looking for the cert with that designation to file away and "show the auditor" when it comes up. Simple.

Your customers can have their own independent calibration done.

The second option is it allows an exception if the external lab is acceptable to the customer. So your customer's customer would have to sign off. Probably more likely to get an act thru Congress.

Your "out" is in the second part of which says: "Calibration services may be performed by the equipment manufacturer when a qualified laboratory is not available for a given piece of equipment. In such cases the organization shall ensure that the requirements listed in Section have been met." is the requirements for internal labs -- scope and such. You'll need to figure out how to get yourself into that exception. Good luck.

Sponsored Links

The time now is 08:26 PM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.

Misc. Internal Links

NOTE: This forum uses "Cookies"