The Cove Business Standards Discussion Forums
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums >
Forum Username

Elsmar Cove Forum Visitor Notice(s)

Manufacturing Processes Topics Manufacturing Processes blog Topics
Old
Rating: 1 votes, 3.00 average.

Laminaria - Biocompatibility Study?

Posted 15th August 2014 at 10:31 AM by sherley13

Laminaria it is Ocean Kelp dried and cut to 60mm size and classified by mm thickness size. It is a natural product of vegetable origin. Being a Class 2 Device by FDA and by Medical Device Directives of the European Union, we are required to study the...
Involved in Discussions
Views 2505 Comments 1 sherley13 is offline
Old

Is tool wear a special cause? No...

Posted 26th February 2014 at 09:52 AM by bobdoering (Bob Doering)

Tool wear is common cause. It is a cause intrinsic in the process and can not be eliminated. It affects every part. Special causes are not intrinsic in the process, and do not affect every part - such as tool breakage, start-up, warm-up, etc. It is non-random...
bobdoering's Avatar
Stop X-bar/R Madness!!
Views 3291 Comments 0 bobdoering is offline
Old
Rating: 2 votes, 5.00 average.

Preparing an X hi/lo-R Chart in Infinity QS ProFicient

Posted 27th September 2010 at 12:50 PM by bobdoering (Bob Doering)
Updated 27th September 2010 at 02:57 PM by bobdoering

I am no expert in preparing charts in InfinityQS, but Steve Wise at InfinityQS helped me fab up a trial. I hope this explanation can get one started if they have this software handy.

When using InfinityQS, I found that one could fabricate...
bobdoering's Avatar
Stop X-bar/R Madness!!
Views 4914 Comments 0 bobdoering is offline
Old
Rating: 1 votes, 4.00 average.

Tobacco and CSR (Corporate Social Responsibility)

Posted 17th May 2010 at 11:47 PM by Dr. L. Ramakrishnan

I was invited for a talk on Green Procurement by the Indian Institute of Management, Bangalore, at their ADB sponsored workshop on Environmental Management. The programme for the day was held at the Infosys campus, Bangalore and the conference arrangement...
Elsmar Cove Forum Moderator
Views 5421 Comments 2 Dr. L. Ramakrishnan is offline
Old
Rating: 1 votes, 5.00 average.

Total Variance Equation and process capability

Posted 10th January 2010 at 12:34 PM by bobdoering (Bob Doering)
Updated 13th January 2010 at 08:15 PM by bobdoering
Some Related Topic Tags nonnormal, normal, p vlaue, process capability

When determining process capability, you need to understand the sources of variation. What is the process, and what would one expect the distribution to be? Often the time-ordered run chart has as much to say about the distribution than just jumping...
Attached Thumbnails
Click image for larger version

Name:	Total Variance.jpg
Views:	1454
Size:	51.9 KB
ID:	29  
bobdoering's Avatar
Stop X-bar/R Madness!!
Views 14056 Comments 1 bobdoering is offline

Do you find this blog post helpful and informational?

The time now is 04:47 AM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.



Misc. Internal Links


NOTE: This forum uses "Cookies"