In-House Laboratory Scope - Calipers, Pin Gages and Digital Indicators

[ozziegood]

I am wondering about my in-house lab scope if I only perform calibration on calipers, pin gages and digital indicators. What would my internal lab scope need to entail??

 

[Hershal]

Ozziegood,

It appears you have adimensional lab, primarily length and diameter. I am presuming that the digital indicators are a length type instrument (like a dial indicator). The diameter part of the scope comes from the pin gages.

Your measurement uncertainty (MU) will likely be different for each of the three however.

Hershal

 

[Tom W]

I am wondering about my in-house lab scope if I only perform calibration on calipers, pin gages and digital indicators. What would my internal lab scope need to entail??

Welcome to the Cove.

The type of lab scope I typically see list the following:

Types of Equipment in the lab
Which of that equipment requires calibration
The types of tests you do in the lab
The specifications that the tests are done to.

I do not know anything about your situation but you might want to start with these items and fill in the blanks. Are you going for registration to a standard? If so what standard?

 

[gaugefixer]

Tom; good list; the only thing I would add to it is the resolution and the measurement uncertainty of the lab equipment.

Roger

Welcome to the Cove.

The type of lab scope I typically see list the following:

Types of Equipment in the lab
Which of that equipment requires calibration
The types of tests you do in the lab
The specifications that the tests are done to.

I do not know anything about your situation but you might want to start with these items and fill in the blanks. Are you going for registration to a standard? If so what standard?

 

[Marty6619]

Hi,
Im work in the smal PME and I need to do LAB SCOPE for a big customer.
Do you have already made a form that I could copy it's rush ???

Thank you Martin