The Cove Business Standards Discussion Forums
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > >
Forum Username

Elsmar Cove Forum Visitor Notice(s)

Wooden Line

Raw materials as bulk materials (polymer, adhesive, etc) for PPAP

Monitor the Elsmar Forum
Courtesy Quick Links

Links Elsmar Cove visitors will find useful in the quest for knowledge and support:

Jennifer Kirley's
Conway Business Services

International Quality Services

Marcelo Antunes'
SQR Consulting, and
Medical Devices Expert Forum

Bob Doering
Bob Doering's Blogs and,
Correct SPC - Precision Machining

Ajit Basrur
Claritas Consulting, LLC

International Standards Bodies - World Wide Standards Bodies

AIAG - Automotive Industry Action Group

ASQ - American Society for Quality

International Organization for Standardization - ISO Standards and Information

NIST's Engineering Statistics Handbook

IRCA - International Register of Certified Auditors

SAE - Society of Automotive Engineers

Quality Digest

IEST - Institute of Environmental Sciences and Technology

Some Related Topic Tags
bulk materials, raw materials, ppap (production part approval process), ts 16949 - automotive quality system standard
Thread Tools Search this Thread Rate Thread Content Display Modes
  Post Number #1  
Old 16th February 2009, 10:04 AM

Total Posts: 59
Please Help! Raw materials as bulk materials (polymer, adhesive, etc) for PPAP

As stated in another thread, we are starting to flow back PPAP requirements to our suppliers, as we prepare for TS registration audits.

We make punched parts that go into electrical assemblies. Our automotive customers usually ask us for a level 3 PPAP.

Our process is mainly chemical. First we mix up some polymers and some other goodies, coat it, cure it, add adhesive, and then punch out the parts. A good majority of our raws come in 55gal drums and are catalog chemicals. Does this qualify these raws as BULK material, and we should be getting level 1 PPAP from them?

Any help would be apprciated.

Sponsored Links
  Post Number #2  
Old 17th February 2009, 09:23 AM
Marc's Avatar

Total Posts: 26,665
Re: Raw materials as bulk materials (polymer, adhesive, etc) for PPAP

Any takers on this one?

Lower Navigation Bar
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > >


Visitors Currently Viewing this Thread: 1 (0 Registered Visitors (Members) and 1 Unregistered Guest Visitors)
Thread Tools Search this Thread
Search this Thread:

Advanced Forum Search
Display Modes Rate Thread Content
Rate Thread Content:

Forum Posting Settings
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Emoticons are On
[IMG] code is On
HTML code is Off

Similar Discussion Threads
Discussion Thread Title Thread Starter Forum Replies Last Post or Poll Vote
Bulk Materials (Lead {Pb} Alloys) PPAP Requirements Bill Kirsch APQP and PPAP 5 24th April 2013 10:12 AM
Sample Sizes for 'Bulk' Fluids/ Materials (Polymer Synthesis Process) daamor Design and Development of Products and Processes 1 12th April 2013 09:57 PM
4th Edition PPAP manual - Bulk Materials - Can you guess what this means? Jim Wynne APQP and PPAP 12 13th August 2009 04:20 PM
PPAP Requirements for Raw / Bulk Materials? kmaechtlinger APQP and PPAP 6 25th July 2007 03:57 AM
Bulk Materials PPAP / FMEA - Appendix F of the PPAP manual philstunell APQP and PPAP 1 7th March 2007 11:16 AM

The time now is 09:44 PM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.

Misc. Internal Links

NOTE: This forum uses "Cookies"