S
Sorin
So..the spec in question requirement is as follows:
''60 minutes minimum plus a further 60 minutes per each inch (25.4 mm) of
thickness or fraction thereof.''
My interpretation is that the soaking time will be 60 mins plus 60 mins for each inch or fraction of a inch of thickness.
Ex: Thickness 0.75'' = 2 hours / Thickness 1.25'' = 3 hours
Some of my colleagues disagree. Their interpretation is that the plus 60 minutes is for each inch or fraction of a inch over one inch
Ex: Thickness 0.75 = 1 hour / Thickness 1.25 = 2 hours
I am at the end of my arguments.
What is your take?
''60 minutes minimum plus a further 60 minutes per each inch (25.4 mm) of
thickness or fraction thereof.''
My interpretation is that the soaking time will be 60 mins plus 60 mins for each inch or fraction of a inch of thickness.
Ex: Thickness 0.75'' = 2 hours / Thickness 1.25'' = 3 hours
Some of my colleagues disagree. Their interpretation is that the plus 60 minutes is for each inch or fraction of a inch over one inch
Ex: Thickness 0.75 = 1 hour / Thickness 1.25 = 2 hours
I am at the end of my arguments.
What is your take?