Product Quality Certifcate types? (Certification by Lot)

[AirAusquin]

Hi, hello from Venezuela. I am back after some years of inactivity on QMSs. Our company is working towards ISO/TS certification, hence my post in this thread, although it is not essentially QMS related.

More than 10 years ago while defining the content of Product Quality Certificate (by Lot) for another company, I found a DIN standard that outlined the different levels of detail that could be included in the document, similar to the submission level table in the PPAP reference book.

Does anyone knows a similar reference or standard for the elaboration of the product quality certificate by lot??? a web search has resulted frustating as most results have to do to QMS or product certification services.

Our clients has not specified anything in this regard. They just ask for the document.

The inspection of the related parts is being done by attributes in some cases, so the final quality certificate of the lot will not show any results of variables measurement, as most people is acquainted to. We use a checking fixture that complies with all the dimensions in the product drawing. Conformance to material specifications is verified at receiving inspection.

Thanks in advance

Alejandro Irausquin

 

[Stijloor]

Re: Product Quality Certifcate types?

Hi, hello from Venezuela. I am back after some years of inactivity on QMSs. Our company is working towards ISO/TS certification, hence my post in this thread, although it is not essentially QMS related.

More than 10 years ago while defining the content of Product Quality Certificate for another company, I found a DIN standard that outlined the different levels of detail that could be included in the document, similar to the submission level table in the PPAP reference book.

Does anyone knows a similar reference or standard for the elaboration of the product quality certificate??? a web search has resulted frustating as most results have to do to QMS or product certification services.

Our clients has not specified anything in this regard. They just ask for the document.

The inspection of the related parts is being done by attributes in some cases, so the final quality certificate of the product will not show any results of variables measurement, as most people is acquainted to. We use a checking fixture that complies with all the dimensions in the product drawing. Conformance to material specifications is verified at receiving inspection.

Thanks in advance

Alejandro Irausquin

Hello Alejandro,

Did it look similar to this?
http://www.schaeffler.com/remotemed...qaa_en/2_PPAP_Production_Part_Approval_en.doc

Stijloor.

 

[AirAusquin]

Stijloor, thanks for your reply. No matter how much time I expend writing my question I totally missed the point.

I am talking about certification by lots. I slightly modified my question to reflect that.

Although PPAP is not what I am looking for, browsing your attachment gave me the idea of looking back at the PSW form. The declaration on it and the reference to drawings and checking aids looks like a good model.

Thanks again,

Alejandro

 

[AirAusquin]

Re: Product Quality Certifcate types?

Hello Alejandro,

Did it look similar to this?
http://www.schaeffler.com/remotemed...qaa_en/2_PPAP_Production_Part_Approval_en.doc

Stijloor.

Stijloor, I further analized the info in the document linked by you and found that the standard mentioned in section 3.2.2 is just the document I was familiar with (DIN EN 10204 / DIN 50.049)

I have found references that EN 10204:2004 can be used for any type of material (altough it is titled "metalic materials..."). The ISO equivalent is ISO 10474. See:
http://www.unsider.it/Pdf/Formazione/MemoriaUnsider.pdf

Thanks again for your help!

Alejandro