How to find consulting clients?

W

Wendy01

I am planning to pursue my career as a independent quality consultant(ISO), I do have some experience as well as few certification to prove my crediblity. My question is that how do I look for clients, do I advertise or contact their purchasing departments or join some consultant company? Those of you who are established in this field I would appreciate your response on ways to swim through the struggling years.

Thanks
 

Marc

Fully vaccinated are you?
Leader
It's a crowded field if you're considering ISO 9001 implementations (sorta like you missed the Gold Rush of the 1990's). I really can't say myself. Many advertise. I got into consulting over 20 years go but I 'lucked' into it (long story). Most of my jobs over the years have been through recommendations, so I'd say consider networking. You could also contact consulting companies if you want to work for someone.
 

AndyN

Moved On
It's a crowded field if you're considering ISO 9001 implementations (sorta like you missed the Gold Rush of the 1990's). I really can't say myself. Many advertise. I got into consulting over 20 years go but I 'lucked' into it (long story). Most of my jobs over the years have been through recommendations, so I'd say consider networking. You could also contact consulting companies if you want to work for someone.

I agree, plus the 'feast and famine' issue is going to happen, too. When you're busy, you're not selling, and you don't get paid to sell!

One possibility is to find an existing group consulting practice and see if they would have you work as an associate...
 

Wes Bucey

Prophet of Profit
I am planning to pursue my career as a independent quality consultant(ISO), I do have some experience as well as few certification to prove my crediblity. My question is that how do I look for clients, do I advertise or contact their purchasing departments or join some consultant company? Those of you who are established in this field I would appreciate your response on ways to swim through the struggling years.

Thanks
Marc and Andy make valid points. We have two threads you should read through at this stage of your business preparation.
Consulting – Is it in YOUR Career Future?
Contracting/Temping - Viable Alternates in Tough Times

The important thing is to really clarify what YOU mean by "consulting" as you are able to, and intend to, provide it.

Once you have that firmly in hand, you can begin to develop your marketing plan. As part of that marketing plan, you have to be able to identify who your client base will be and what value they NEED before you can induce them to believe you can provide that value and that they should pay you to do so. (the world's greatest chef would probably not market his services to patients who must spend the rest of their lives on intravenous feeding.)
 
W

Wendy01

It seems from the discussion that bus is full and there is no room for new people. Thanks though for giving me reality check on this.:frust:
 

harry

Trusted Information Resource
It seems from the discussion that bus is full and there is no room for new people. ................

Not really. It means that the thigh and breast meat were gone and you will need more effort and time to hunt for meat among the bones in other places. :tg: :tg:
 

Marc

Fully vaccinated are you?
Leader
Well, I hate to be a negative person on this, but it is something one really has to think about closely. I mentioned that the 'Gold Rush' with respect to ISO 9001 is 'over' because there are so many people who have been throught it if only in a company they worked in. Add to that how many people are out of work, starting an ISO 9001 consulting business is a very popular idea. Unfortunately low hanging fruit is gone.

The big money in ISO 9001 was pre-2002 (to be generous). I was lucky my self because I started about 20 years ago. But by 2002 the 'big' money was gone as far as implementations go. Big companies were already registered, for the most part, so one had to concentate on smaller 'fish' who had less money to spend and were more indignant about having to register to ISO 9001 in the first place. It is almost always done as a customer requirement. I also cite 2002 as it was the last year I did any significant work in ISO 9001. By then even auditor pay had dropped significantly. By 2002 it had become relatively low paying with constant travel. I was lucky in that I had other income sources/investments so 'dropping out' wasn't that hard on me.

I was even luckier with the old QS-9000. While TS 16949 did come along and replaced QS-9000, QS-9000 was nothing short of a bigger gold mine. However, with TS 16949 the AIAG et al tied that up through tight control of who can become auditors so that is a difficult field to break into.

As a general comment, if you want to see how tough the field is these days, look to registrars who are having more and more problems finding and keeping new clients. Growth has become a problem. When the majority of large companies are already registered, the focus has become smaller clients which, as I said, pay less and aren't always happy about it in the first place.

A similar effect can be seen with the internet. I rarely go to internet web master forums these days because most of what is discussed is essentially 'old hat'. Tens of thousands of people are starting web sites and expect to get highly ranked in search engines quickly. The internet 'Gold Rush' is essentially over as well. A friend of mine has been in contact with me about a small site he started and wants to learn how to do this 'internet stuff'. It's a site for his brother's art work. As I told him, stop by any time. I'll even spend a couple days with him if he wants to come here and spend some time. But, no matter what knowledge I impart to him it will, like most small businesses, probably not become a significant income. Luckily the investment is relatively small initially. Then again, there are people who do quite well starting up internet sites which become profitable so it's not impossible. It just isn't as easy as it was years ago. The competition is fierce.

My honest belief is that to get into consulting you have to find a niche that you are good at and enjoy. But the problem is there are few niches left. Competition, especially from big, established companies, is everywhere. Most people do not do well as individual entrepreneurs. Finding a company to work for is usually the best bet.

Just some thoughts...
 

Marc

Fully vaccinated are you?
Leader
Not really. It means that the thigh and breast meat were gone and you will need more effort and time to hunt for meat among the bones in other places. :tg: :tg:
I agree, and well stated. As negative as I am, there are opportunities. They're just harder to find and take more work to get.

Remember that being a consultant is just starting a small business.
 
W

Wendy01

Marc:

Thanks again for such a valuable advice, I agree with your views. I do have expertise in Risk Management, and I believe right now this field is still not overwelhmed so will try to use this niche to get into the market. But will definately keep in mind the problems I may encounter on my way.:thanks:
 
B

blue moon

it depend on your location,

because most of people in company are familliar now with ISO 9001 and also many type of documents available at the internet

it is better if you can support consultancy for six sigma now it is popular and needed

thanks
 
Last edited by a moderator:
Top Bottom