The Cove Business Standards Discussion Forums
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > >
Forum Username

Elsmar Cove Forum Visitor Notice(s)

Wooden Line

Receiving Inspection AQL - Am I allowed to just pick a AQL? - Page 2

Monitor the Elsmar Forum
Courtesy Quick Links


Links Elsmar Cove visitors will find useful in the quest for knowledge and support:

Jennifer Kirley's
Conway Business Services


Howard's
International Quality Services


Marcelo Antunes'
SQR Consulting, and
Medical Devices Expert Forum


Bob Doering
Bob Doering's Blogs and,
Correct SPC - Precision Machining


Ajit Basrur
Claritas Consulting, LLC



International Standards Bodies - World Wide Standards Bodies

AIAG - Automotive Industry Action Group

ASQ - American Society for Quality

International Organization for Standardization - ISO Standards and Information

NIST's Engineering Statistics Handbook

IRCA - International Register of Certified Auditors

SAE - Society of Automotive Engineers

Quality Digest

IEST - Institute of Environmental Sciences and Technology


Some Related Topic Tags
aql (acceptable quality level), receiving inspection
Reply
 
Thread Tools Search this Thread Rate Thread Content Display Modes
  Post Number #9  
Old 13th September 2018, 11:23 AM
Eredhel

 
 
Total Posts: 295
Re: Receiving Inspection AQL - Am I allowed to just pick a AQL?

You're on the right track, I just wanted to make sure you didn't think there was some sample size specific ISO 9001 requirement because there isn't. Like Scott said it's up to you all to balance the risk and pick something reasonable.

Sponsored Links
  Post Number #10  
Old 13th September 2018, 11:27 AM
AndyN's Avatar
AndyN

 
 
Total Posts: 9,119
Question Re: Receiving Inspection AQL - Am I allowed to just pick a AQL?

Quote:
In Reply to Parent Post by venom21 View Post

Hello,

I'm very new to this thread so I hope I'm in the right place....I have a question about receiving inspection AQL's. I'm ISO 9001:2015 certified and I have product coming in from an outside vendor and I would like to use MIL-STD-105E Table II-A the Single Sampling Plans for Normal Inspection (Master Table). The supplier I'm using provided Final Inspection IP's and Control Plans and sent me a sample part that I measured on my CMM and all of my measurements are within a .0001". With this in mind I would like to check each lot regardless of size (lots range from 10 pcs to 100 pcs) at a 6.5 AQL. My question is am I allowed to just pick a AQL? I feel like this has to be explained somewhere I'm not sure where.....

Thanks!
I've been heavily involved in this decision (or at least, the aftermath of the decision being made). Firstly, since your supplier provides their inspection data etc. can I ask WHY you feel it's necessary to sample?
Thanks to AndyN for your informative Post and/or Attachment!
  Post Number #11  
Old 17th September 2018, 07:53 AM
Mike S.

 
 
Total Posts: 2,270
Re: Receiving Inspection AQL - Am I allowed to just pick a AQL?

You and the supplier need to have an understanding as to what level of quality you need and expect. This should be done upfront.

Maybe you expect 100% good parts, but can't afford 100% inspection. How much risk can you tolerate? What happens if a bad part moves on to the next step?

How trustworthy is your supplier? Do they 100% inspect?
Reply

Lower Navigation Bar
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > >

Bookmarks



Visitors Currently Viewing this Thread: 1 (0 Registered Visitors (Members) and 1 Unregistered Guest Visitors)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Forum Search
Display Modes Rate Thread Content
Rate Thread Content:

Forum Posting Settings
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Emoticons are On
[IMG] code is On
HTML code is Off


Similar Discussion Threads
Discussion Thread Title Thread Starter Forum Replies Last Post or Poll Vote
Partial Incoming (Receiving) Inspection Delivery Inspection. Muhd Firdaus Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4 27th November 2013 12:21 PM
Inspection Forms - Receiving Inspection on Buses that will get Refurbished sgurusaran Document Control Systems, Procedures, Forms and Templates 7 3rd June 2011 12:10 PM
Critical Characteristics in Incoming (Receiving) Inspection - Inspection Levels luciano Inspection, Prints (Drawings), Testing, Sampling and Related Topics 18 21st April 2010 04:32 PM
Receiving Inspection Procedure - Visual inspection defined little__cee Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12 9th October 2009 11:25 AM
Process Control Plan and Inspection Plans - Receiving and final inspection required? krishkaar Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8 3rd November 2004 07:46 AM



The time now is 05:13 AM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.



Misc. Internal Links


NOTE: This forum uses "Cookies"