The Cove Business Standards Discussion Forums
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > >
Forum Username

Elsmar Cove Forum Visitor Notice(s)

Wooden Line

What level PPAP for 5 critical parts? - Page 2

Monitor the Elsmar Forum
Courtesy Quick Links

Links Elsmar Cove visitors will find useful in the quest for knowledge and support:

Jennifer Kirley's
Conway Business Services

International Quality Services

Marcelo Antunes'
SQR Consulting, and
Medical Devices Expert Forum

Bob Doering
Bob Doering's Blogs and,
Correct SPC - Precision Machining

Ajit Basrur
Claritas Consulting, LLC

International Standards Bodies - World Wide Standards Bodies

AIAG - Automotive Industry Action Group

ASQ - American Society for Quality

International Organization for Standardization - ISO Standards and Information

NIST's Engineering Statistics Handbook

IRCA - International Register of Certified Auditors

SAE - Society of Automotive Engineers

Quality Digest

IEST - Institute of Environmental Sciences and Technology

Some Related Topic Tags
apqp (advanced product quality planning), critical parts and components, ppap (production part approval process)
Thread Tools Search this Thread Rate Thread Content Display Modes
  Post Number #9  
Old 19th May 2018, 08:22 PM
Jim Wynne's Avatar
Jim Wynne

Total Posts: 14,228
Re: What level PPAP for off-the-shelf parts?

In Reply to Parent Post by Jafri View Post

Thanks, Jim. You probably have saved us from many bad conversations with suppliers due to putting unnecessary demands on them.

So this is what it should be then:
- Material test results (only if material was a requirements from us)

In other words, for most items, just PSW should suffice.
That's the way many people deal with catalog items, but there are too many variables not in evidence here to be able to give you a definitive answer.

Sponsored Links

Lower Navigation Bar
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > >


Visitors Currently Viewing this Thread: 1 (0 Registered Visitors (Members) and 1 Unregistered Guest Visitors)
Thread Tools Search this Thread
Search this Thread:

Advanced Forum Search
Display Modes Rate Thread Content
Rate Thread Content:

Forum Posting Settings
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Emoticons are On
[IMG] code is On
HTML code is Off

Similar Discussion Threads
Discussion Thread Title Thread Starter Forum Replies Last Post or Poll Vote
Issue: Suppliers charge for complete Level III PPAP package - Heat Treated Parts vardar3 APQP and PPAP 16 15th December 2011 02:50 AM
AQL (Acceptable Quality Level) for Safety Critical Parts StorkSPA AQL - Acceptable Quality Level 13 18th February 2011 10:25 AM
Help with PPAP Level 3 for a small company! Machined parts ekonom APQP and PPAP 5 12th November 2009 01:56 PM
What is a Level 3 PPAP? Blueprint says "Level 3 PPAP is required" davidguo APQP and PPAP 10 6th September 2004 05:58 PM
PPAP Master Parts - Do we have to save the original PPAP parts? Dawn APQP and PPAP 2 27th October 1998 07:36 AM

The time now is 04:21 AM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.

Misc. Internal Links

NOTE: This forum uses "Cookies"