The Cove Business Standards Discussion Forums
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > > > >
Forum Username

Elsmar Cove Forum Visitor Notice(s)

Wooden Line

UDI Direct Marking Compliance Date Clarification and one other UDI question

Monitor the Elsmar Forum
Courtesy Quick Links


Links Elsmar Cove visitors will find useful in the quest for knowledge and support:

Jennifer Kirley's
Conway Business Services


Howard's
International Quality Services


Marcelo Antunes'
SQR Consulting, and
Medical Devices Expert Forum


Bob Doering
Bob Doering's Blogs and,
Correct SPC - Precision Machining


Ajit Basrur
Claritas Consulting, LLC



International Standards Bodies - World Wide Standards Bodies

AIAG - Automotive Industry Action Group

ASQ - American Society for Quality

International Organization for Standardization - ISO Standards and Information

NIST's Engineering Statistics Handbook

IRCA - International Register of Certified Auditors

SAE - Society of Automotive Engineers

Quality Digest

IEST - Institute of Environmental Sciences and Technology


Some Related Topic Tags
labeling requirements, unique device identification (udi)
Reply
 
Thread Tools Search this Thread Rate Thread Content Display Modes
  Post Number #1  
Old 13th February 2018, 12:26 PM
katastic2908

 
 
Total Posts: 20
Please Help! UDI Direct Marking Compliance Date Clarification and one other UDI question

Good Morning,

Can anyone help me interpret this? Am I correct in reading it as - If a finished device was manufactured and labeled prior to the 24Sep2016 UDI labeling compliance date that you have until 24Sep2019 (1 year after the direct marking compliance date for Class II) to put a direct mark on those products, but if it was manufactured and labeled AFTER 24Sep2016 that we have until 24Sep2018 to direct mark it?

"Under 21 CFR 801.30(a)(1), a finished device manufactured and labeled prior to its compliance date for 21 CFR 801.20 is excepted from UDI labeling requirements until three years after the UDI compliance date for 21 CFR 801.20 for that particular device. Because direct marking requirements and GUDID data submission requirements are tied to the UDI labeling requirement at 21 CFR 801.20, the exception at 21 CFR 801.30(a)(1) applies to these requirements as well. For devices intended to be used more than once and intended to be reprocessed before each use, the expiration of the three-year exception under 21 CFR 803.30(a)(1) is still based on the
compliance date for UDI labeling requirements under 21 CFR 801.20, not the direct marking compliance date. For example, the compliance date for 21 CFR 801.20 for class II devices that are not implantable, life-supporting, or life-sustaining was September 24, 2016. Thus, an
individual class II device manufactured and labeled on May 1, 2016, that is not implantable, lifesupporting, or life-sustaining and that requires direct marking, would not be required to be in compliance with UDI labeling, GUDID data submission, or direct marking requirements until September 24, 2019."

https://www.fda.gov/downloads/Medica.../UCM452262.pdf

Sponsored Links
Reply

Lower Navigation Bar
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > > > >

Bookmarks



Visitors Currently Viewing this Thread: 1 (0 Registered Visitors (Members) and 1 Unregistered Guest Visitors)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Forum Search
Display Modes Rate Thread Content
Rate Thread Content:

Forum Posting Settings
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Emoticons are On
[IMG] code is On
HTML code is Off


Similar Discussion Threads
Discussion Thread Title Thread Starter Forum Replies Last Post or Poll Vote
Data Matrix and DPM (direct part marking) UDI Standards - ISO/IEC TR 29158 celticfrosting Other US Medical Device Regulations 2 5th March 2018 05:12 PM
UDI - Direct Marking and Reprocessing Clarification Mark Meer Other US Medical Device Regulations 12 8th February 2015 01:40 PM
Clarification on USe by date and EC Rep address on IVD INSTRUMENTS!! sreenu927 EU Medical Device Regulations 1 30th December 2009 09:36 PM
CE Marking: Date of Manufacture or Date of Shipment Asherlee EU Medical Device Regulations 1 17th June 2009 03:14 AM
Design Dossier up to date required - Audit finding - CE Marking revolution_2006 EU Medical Device Regulations 6 4th April 2009 02:06 AM



The time now is 09:25 PM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.



Misc. Internal Links


NOTE: This forum uses "Cookies"