The Cove Business Standards Discussion Forums More Free Files Forum Discussion Thread Post Attachments Listing Cove Discussion Forums Main Page
UL - Underwriters Laboratories - Health Sciences
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > National and International Business System Standards > Various Other Specifications, Standards, and related Requirements
Forum Username

Elsmar Cove Forum Visitor Notice(s)

Wooden Line

Development of a WPS / Qualification Test Records for D17.1


Elsmar XML RSS Feed
Elsmar Cove Forum RSS Feed

Monitor the Elsmar Forum
Sponsor Links




Courtesy Quick Links


Links that Cove visitors will find useful in your quest for knowledge:

International Standards Bodies - World Wide Standards Bodies

ASQ - American Society for Quality

International Standards Organization - ISO Standards and Information

Howard's
International Quality Services


Marcelo Antunes'
SQR Consulting, and
Medical Devices Expert Forum


Bob Doering
Bob Doering's Blogs and,
Correct SPC - Precision Machining


Ajit Basrur
Claritas Consulting, LLC


NIST's Engineering Statistics Handbook

IRCA - International Register of Certified Auditors

SAE - Society of Automotive Engineers

Quality Digest

IEST - Institute of Environmental Sciences and Technology


Some Related Topic Tags (Not all threads are Tagged)
aws d17.1 - fusion welding, qualification (product), qualification of equipment and processes, welding
Reply
 
Thread Tools Search this Thread Rate Thread Content Display Modes
  Post Number #1  
Old 2nd December 2014, 03:33 PM
spectredotsix

 
 
Total Posts: 2
Please Help! Development of a WPS / Qualification Test Records for D17.1

Hello All,

I had a question about WPS and Qualification test records, etc. for the AWS Standard D17.1

How do we go about establishing a WPS, and when the company welders perform test weldments at various thicknesses of each alloy group, do we fill out the Qualification Test Record form for them and send this to an NDT facility with CWI's for Visual / NDT Testing? What specific tests are they required to perform, and are they supposed to sign the "Qualifier" portion of the form?

I just started work on quality engineering for an FAA Repair Station, and it is approaching the time for the welder recertification and such. Any light on the situation would help me establish and formalize the welding setup we have at our facility. Thanks in advance.

-Charlie

Sponsored Links
  Post Number #2  
Old 29th December 2014, 05:45 PM
tonefordays

 
 
Total Posts: 42
Re: Development of a WPS / Qualification Test Records for D17.1

Before proceeding, I would suggest getting a copy of AWS D17.1 (latest edition) if you haven't already and also AWS B2.1.

When creating a Welding procedure specification (WPS), it's crucial that you capture all the essential variables related to the welding process plus whatever additional requirements (if any) the customer may require, or if there is any preheating, or post welding heat treating involved. AWS D17.1 doesn't provide much in regard to these essential variables, but rather references AWS B2.1 Standard for welding procedure and performance qualification. This standard will provide more in depth information regarding the requirements for procedure qualification.

Some things to consider when creating a WPS are;

-Welding Process (GTAW,GMAW, etc)
-Manual, Auto etc.
-Backing (if used)
-Material type and specification
-Material thickness
-Filler metal type and classification
-Filler metal size
-Welding position
-Joint detail (groove, fillet, etc)
-Shielding gas(s)
-Flowrate
-Preheat info (if applicable)
-Post weld heat treat (if applicable)
-Tungstes size/type (GMAW)
-Mode of metal transfer (GMAW)
-Amperage
-Voltage
-Travel speed
-Electrical current (AC or DC)

This is an abbreviated list, but considering the amount of variables involved, it's important that everything is captured. Remember, the WPS is basically a "recipe" for the welder to follow which allows them to produce an acceptable weld with a given process and base metal. The more information available, the better the chances of success.
If you?re not sure, you can always call the testing facility you plan on using, and they may provide you with some useful information.

Hope this helps.
Thanks to tonefordays for your informative Post and/or Attachment!
Sponsored Links

  Post Number #3  
Old 6th April 2017, 08:53 PM
Aluminumship

 
 
Total Posts: 1
Re: Development of a WPS / Qualification Test Records for D17.1

tonefordays, just finished my cwi training and the company wants me to do wps..any suggestion how to start creating wps?
  Post Number #4  
Old 7th April 2017, 08:51 AM
tonefordays

 
 
Total Posts: 42
Re: Development of a WPS / Qualification Test Records for D17.1

First thing you'll need to know is what code you will be working with?

In the code you will find all the essential variable information needed on the WPS. But before you get too far ahead of yourself, some basic things that will need to be determined ahead of time are, material type, thickness, process, position, joint configuration, shielding gas (if applicable), filler metal type and size. Knowing this will help you find the requirements within the code. Remember the WPS is a recipe for the welder to follow to be successful, so any welder should be able to read and understand the information that is on the WPS, so you'll want to make sure it's clear and easy to understand.
The code books have recommended forms you can use for your WPS/PQR, however keep in mind these are minimum requirements, and may not fully capture all the information for your particular situation. You can add more requirements than what is shown on the form, if your situation requires it, however if there is no need for additional requirements, I would keep it as simple as possible.
Writing a WPS can be a little time consuming, however if you do a little homework ahead of time, things should fall into place. Also, AWS B5.1 does requires that a CWI be able to interpret and understand a WPS, however it is not a requirement that a CWI know how to create a WPS. That would fall under the responsibility of a SCWI or the employer.
Once you have put together a preliminary WPS, discuss it with your employer or welders and make necessary changes. When everyone is in agreement, it's time to move on the the PQR where you will witness the welding and the variables.
Before the welder strikes an arc, it is very important that they understand what YOU expect from them during the test so there aren't any surprises.
If doing a multi pass weld, the welder needs to know that EVERY welding pass needs to pass a visual welding inspection to the code requirements. If one pass does not meet the requirements, it should be decided before the test begins if grinding or any type of rework is allowed. AWS D1.5 is the only code I know of that does not allow the use of any power tools during the test. If you feel the work being performed in your shop should or shouldn't allow for the use of power tools during welding, be sure everyone is in full agreement before starting the test.
When I administer a welding test, I don't allow for any leniency. Typically they are working in "ideal" situations with clean metal and good fit up so if they struggle with that, it's only going to be more difficult in the shop or in the field where often times they don't have ideal situations.

Hope that helps.
Reply

Lower Navigation Bar
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums > National and International Business System Standards > Various Other Specifications, Standards, and related Requirements

Bookmarks



Visitors Currently Viewing this Thread: 1 (0 Registered Visitors (Members) and 1 Unregistered Guest Visitors)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Forum Search
Display Modes Rate Thread Content
Rate Thread Content:

Forum Posting Settings
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Emoticons are On
[IMG] code is On
HTML code is Off


Similar Discussion Threads
Discussion Thread Title Thread Starter Forum Replies Last Post or Poll Vote
Go/No Go Qualification of a Test System cheowkwen Statistical Analysis Tools, Techniques and SPC 2 20th March 2015 08:19 AM
AWS D17.1 - Fusion Welding - Qualification Test Record Sorin Various Other Specifications, Standards, and related Requirements 4 8th March 2010 05:56 PM
Supplier Development - How to buy off on tooling and material qualification mynicky APQP and PPAP 2 11th July 2008 12:36 PM
Test records shall show actual test results data - 8.2.4.1 Inspection documentation clara AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4 26th January 2007 12:37 PM
Machinery Qualification Runoff test mibusha QS-9000 - American Automotive Manufacturers Standard 3 15th December 1999 07:24 AM



The time now is 09:49 AM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.


 
 


NOTE: This forum uses "Cookies" - A Peachfarm Internet Property