The Cove Business Standards Discussion Forums
Please read this thread...
Software update
Go Back   The Elsmar Cove Business Systems and Standards Discussion Forums
Forum Username

Elsmar Cove Forum Visitor Notice(s)

These are the TOP 1,000 MOST RECENTLY USED Thread Topic Tags (out of 6500+ tags)
Tag Cloud
5s workplace organization methodology 21 cfr part 11 - electronic records and signatures 21 cfr part 111 - dietary supplements (misc) 21 cfr part 803 - medical device reporting 21 cfr part 807 - establishment registra. & device listing 21 cfr part 812 - investigational device exemptions 21 cfr part 820 - med. device mfger. qsr requirements 510(k) 510(k) exempt device 2016 2017 2018 accelerated life and stability testing acceptance criteria accessories (product) accreditation bodies accuracy (general term) accuracy of a measurement device acronyms action plans active medical device adverse event reporting aea - aerospace experience auditor aerospace standards and regulations aiag manual(s) alarp (as low as reasonably possible) aluminum (general topics) amdd - asean medical device directive ams 2750 - pyrometric requirements anab (ansi-asq national accreditation board) andons animal studies annex v/vii annex x anova (analysis of variance) ansi y14.5 - dimensioning and tolerancing ansi z1.4 - inspection by attributes api (american petroleum institute) api q1 - oil industry quality management system (qms) api q2 - oil and gas industry service suppliers app (mobile device software) applicable clauses documents legal requirements etc. approvals approved supplier list (asl) approved suppliers apqp (advanced product quality planning) aql (acceptable quality level) as9100 - aerospace quality management systems as9100 revision d (2016) as9101 - aerospace qms audit requirements as9102 - aerospace first article inspection (fai) as9110 - aerospace maintenance quality systems as9120 - aerospace qms requirements for distributors aspects and impacts (environmental) asq (american society for quality) asq certifications assembly (general term) astm (american society for testing and materials) attribute data attribute data msa (measurement system analysis) audit checklist audit man-days audit nonconformances and findings audit observation auditor qualification requirements and certifications auditors (general topics) auditor training audit plans and audit frequency audit questions audit reports audits and auditing audit scope australia australia tga authorized representative autoclaves automotive (general) automotive industry banks (financial) barcoding (upca - upce - ean8 - ean 13 - qr code) batch manufacturing (general) batch production battery (electric batteries) battery powered devices benefit(s) best practices bias study (measurement) bioburden biocompatibility biocompatibility requirements biocompatibility testing birthdays boeing books brazil brazilian b-gmp (good manufacturing practices) regulations bribes brochures bulk materials business processes business process maps cables (general) calibration (general topics) calibration (metrology) laboratories calibration interval (aka frequency) calibration procedures and methods calibration reports and certificates calibration verification calipers canada capa (corrective and preventive action) capability study (part dimensions from a process or machine) career changes careers catheters cba (certified biomedical auditor) cba (certified biomedical auditor) exam ce mark and ce marking certificate of conformance (c of c) certificate of free sale certificates (general) certification audits certification bodies (cb) certification certificate (content) certification process certifications (professional) certifications (to a standard) certified calibration technician (cct) cfda (china food and drugs administration) change(s) (general) change control change management change notice (process or product) aka pcn charts checklist or check sheet china chrysler class i exempt medical device classification(s) of parts or products class iii medical device class ii medical device class i medical device cleaning methods and processes cleaning validation cleanliness cleanrooms cleanroom validation clinical data management (cdm) clinical evaluations and reports clinical research clinical trials and studies and investigations cloud computing cmdcas (canadian med device conformity assmnt system) cmk cmm (coordinate measuring machine) cnc machine shop cnc machining cnc software coatings cofepris (mexico's medical device and ivd oversight) combination devices and related rules combination drug-device products communications community discussions company divisional differences company name change company policies comparison matrix competence assessments competency complaint files and reports complaint handling process complaints (general) compliance (general) compliance audit compliance to a standard component manufacturers components concessions confidential data connectors (electrical) construction company or industry consultants and consulting containment (related to nonconformances) contamination (also see fod - foreign object damage) context of the organization contingency plans continual improvement (also see continuous improvement) continuous improvement contract audits and contract auditing contract manufacturing contract research organizations (cro) contract review and approval contracts and agreements (general) contract services control chart limits control charts (general) controlled documents control limits control methods control plans controls convenience kits (medical device) copyrights correction and removal (fda term) corrective action (ca) corrective action request (car) corrective action systems cosmetics (parts and products such as painted surfaces) cots (commercial off-the-shelf) counterfeiting control counterfeit parts and products country specific standards and regulations cpk (related to process capability) cqe (certified quality engineer) cqe exam cqi 9 - heat treat cqi 23 - molding system assessment cqi requirements (customer specific requirements) creepage distance critical characteristics critical parts and components critical suppliers cross reference matrix customer approval customer communication customer complaints and customer found nonconformance customer feedback customer notification(s) customer requirements customer satisfaction customer service customer specific requirements (csr) cycle time data (general) data (import from and export to applications) data analysis databases data collection and/or entry data control data integrity data security datum (gd&t) datum feature references dcma (defense contract management agency) deaths declaration of conformity defect rate defects and defectives definitions delivery of products and services dental topics design and development design and engineering control design changes design control design engineering company design exclusion design history file (dhf) design history record (dhr) design inputs and outputs design of experiments (doe) design validation design verification deviations from a print or requirement device history record (dhr) device master record (dmr) dfars (defense federal acquisition regulation supplement) dfmea (design fmea) diagnostic devices (medical) diameter measurement dielectric strength differences (general) dimensional inspection dimensions displays (video monitors) distribution centers distribution of products distributors (distribution company) distributors (general) distributors (medical devices) dock audits document content & structure document control document control (electronic) document control software documented procedures (requirements for) document identification and numbering document references document retention document revisions and changes documents and documentation (general) documents of external origin dod (department of defense) drawing (also see prints) drug devices drug master file (dmf) drugs (medicinal) easa (european aviation safety agency) easa part - 145 maintenance organisation approval education effectiveness efficiency egypt electrical components parts and products electrical power cord(s) electrical safety electronic components parts assemblies and products electronic documents forms and templates electronic records electronic signatures and approvals elsmar emc (electromagnetic compatibility) employee awareness employee development and motivation employees (general) employee training and qualifications en 60601 - medical electrical equipment endoscopic equipment engineering change order (eco) engineering changes engineering drawings environment (environmental related) environmental management systems equipment qualification and validation equivalent medical devices essential performance essential requirements checklist ethylene oxide (eo) etl (intertek's edison testing laboratories) eto (ethylene oxide) sterilization eu 2017/745 europe european medical device regulations european union european union medical device directives (mdd) european union regulations and standards evidence exclusions of clauses in a standard exclusions of product lines in registration to a standard expiration date exports and exporting external audits and auditors external communications external document control external documents - prints standards etc. external issues external laboratories (including calibration and testing) external processes external services faa (federal aviation administration) faa part 145 (certified repair station) faa regulations and requirements faa repair stations failure modes fcc (federal communications commission) fda (food and drug administration) fda guidance fda requirements feedback final inspection and/or testing financial (finance) departments firmware first article inspection (fai) first article inspection report (fair) florida flowcharts fmea - failure modes and effects analysis fmea manual fmea rankings fod (foreign objects and debris) food (general) ford motor company ford q1 foreign manufacturing formats and formatting forms and templates (general) formula (mathematics/statistics) for sale forum software (general) forum software instructions forum software problems fraud functional requirements furls (fda's electronic registration and listing system) gage blocks gage r&r (repeatability and reproducibility) gages (measurement and monitoring devices) gamma irradiation sterilization gamp (good automated manufacturing practice) gamp validation procedures gap analysis gd&t (geometric dimensioning & tolerancing) gdp (good documentation practices) gdpr (eu general data protection regulation) general motors (gm) glp (good laboratory practices) gmdn (global medical device nomenclature) gmp (good manufacturing practices) go no-go gage gs1-128 barcodes gudid (fda global udi database) gui (graphic user interface) guidance documents haccp (hazard analysis & critical control points) hardness measurement harmonization of standards hazard analysis hazard identification and risk assessment health (general) health canada heat treatment hipaa (health insurance portability and accountability act) hipaa rules obligations requirements history holes in parts - location(s) holidays and related occasions home healthcare humidity control humor hypothesis test analysis iaf (international accreditation forum) iaqg (international aerospace quality group) iatf (international automotive task force) iatf 16949:2016 identification (products and parts etc) identification and traceability (general) iec 60335 - household electrical appliance safety iec 60601 - medical electrical equipment iec 60950 (information technology equipment - safety) iec 61000 - electromagnetic compatibility iec 61010 - safety requirements for electrical equipment iec 62133 - secondary cells and batteries safety requirements iec 62304 - medical device software life cycle processes iec 62366 - medical device usability engineering iec 62366-1:2015 medical device usability imdrf (international medical devices regulators forum) imds (international material data system) implantable medical devices (imd) implementation of a standard in a company implementing iatf 16949 implementing iso 9001 imports and importation improvement improvement plans and projects in-house calibration in-process inspection india indications for use information security information technology (it) department infrastructure injection molding innovation inputs (general) inspection (general) inspection devices tools and fixtures inspection methods and plans inspection records inspectors installation qualification (iq) instructions for use (ifu) integrated management systems interaction of processes (see process interactions) interested parties internal auditors internal auditor training internal audits internal communications internal issues internal laboratory international standards internet (general topics and news) interpretations interviews and interview questions investigational testing authorizations (ita) ipc 620 - cable and wire harness assemblies ishikawa diagram isms (information security management system) iso (int'l organization for standardization) iso 9001 - quality management systems iso 9001:2015 iso 10993 - biological evaluation of medical devices iso 11135 - medical device ethylene oxide sterilization iso 11137 - medical device radiation sterilization iso 13485 - medical device qms iso 13485:2016 iso 14001 - environmental management systems iso 14001:2015 iso 14155 - good clinical investigation practices iso 14644 - cleanrooms and controlled environments iso 14971 - medical device risk management iso 15223 - medical device label symbols iso 17020 - criteria for bodies performing inspection iso 17025 - testing and calibration laboratories iso 19011 - quality (qms) and ems audits iso 22000 - food safety management systems iso 26000 - social responsibility iso 27001 - information security management system (isms) iso 31000 - risk management iso 31010 - risk assessment techniques iso 45001 - occupational health and safety management standard israel itar (international traffic in arms regulations) ivd (in vitro diagnostic) devices and reagens ivdd ivdr (in vitro diagnostic regulations) japan job openings jobs (general) key performance indicators (kpi) korea kpi data labeling - eu labeling directive labeling content labeling requirements labels and labeling (general) label symbols laboratories (general) laboratory scope language requirements lead auditor(s) and related topics lead auditor course leadership leakage current leak tester lean lean six sigma legacy products legal requirements life cycle of a device or product lifetime (of a product) linkedin lithium ion batteries load cells low voltage directive 2006/95/ec machine shop machining processes maintenance management representative management review manuals (misc) manufacturing (general term) manufacturing location change manufacturing processes manufacturing site marketing (general) material certifications mathematical equations matrix mdd (medical device directive) mdd 93/42/eec mdel (medical device establishment license) mdr (medical device regulations) mdr (medical device reporting) mdr 745/2017 mds (material declaration sheet) mdsap (medical device single audit program) mdvr - medical device vigilance report measureables (also see metrics) measurement (general) measurement and monitoring and test devices measurement capability analysis measurement equipment resolution and tolerances measurement systems measurement techniques and procedures measurement uncertainty (mu) meddev - ec guidelines on medical devices medical device accessories medical device company or industry medical device electronics and electrical equipment medical device file medical device licensing medical device listing codes and classifications medical device parts and components medical device registration medical device repair and servicing medical device reports including incident reporting medical devices medical devices (disposable) medical device safety medical device software medical device standards and regulations medical equipment (general) medical software metal forming and stamping method validation metrics (measurables such as for objectives) mexico mhlw (japan's ministry of health labor and welfare) mhra (medical & healthcare regulatory agency) micrometers microsoft excel .xls .xlsx spreadsheet microsoft sharepoint software minitab (statistical analysis software) mmc (maximum material condition - gd&t) molds and molding monitoring monitoring and measurement moop (means of operator protection) mop (means of protection) mopp (means of patient protection) mra (mutual recognition agreement- tga australia and eu) msa (measurement system analysis) msa manual msa study msds (material safety data sheet) multiple business units multiple national or international locations multiple sites multiple standards in a company music nadcap (nat'l aerospace & defense contractors accred. pgm) nadcap ac7108 navistar ndt (non-destructive test) new processes new products and new product requirements news nist (nat'l institute of standards & technology) non-destructive testing non-normal data distribution non-sterile medical devices nonconformance recurrence nonconformance report (ncr) nonconformances nonconformance system nonconforming material product or service notified bodies medical devices (nb-med) notified body nrtl (nationally recognized testing laboratories) nylon oasis (online aerospace supplier information system) oasis database objective evidence objectives (quality environmental and other measureables) obl (own brand labeling) occupational health and safety (oh&s) occurrence ranking (fmea) oem (original equipment manufacturer) off the shelf (ots) equipment or parts or software ohsas 18000 & 18001 & 18002 ojt - on the job training (also see training) online internet training courses and universities operational planning operational qualification (oq) operator instructions opportunities (general) opportunities for improvement (ofi) optical comparators order processing organization organizational knowledge orthopedic implants outputs (general) outsourced products and processes outsourced software outsourcing ovens packaging (general) packaging labeling and related requirements packaging sealing packaging standards and specifications painted surfaces paper documents and records pcb (printed circuit board) pdca cycle (plan do check act) pear (process effectiveness assessment report) pems (programmable electrical medical system) performance measureables performance qualification (pq) performance testing personal health information personnel (also see employees and human resources) pfmea (process fmea) pharmaceuticals and pharmaceutical industry pin gages planning plastic injection molding plastic parts plastics plating & coatings pma (pre-market approval) pmda (japan) policies and policy statements policy documents post delivery activities post market activities (misc) post market clinical follow up post market surveillance ppap (production part approval process) ppap review and approval ppk (related to process performance) ppm (parts per million) pre-control chart premarket submissions presentations pressure gages preventive action (pa) preventive maintenance print (drawing) callouts prints (drawings or blueprints) privacy private label manufacturer problem solving procedure examples procedure format procedure pack (medical devices) procedures (general) process approach process audits process capability process changes and change notifications process controls and control plans process design and development processes (general) process flowcharts (process diagrams) process fmea process interactions process mapping process measurement and monitoring process performance process validation process verification and validation product audits product code production production line production processes product limits product safety products and services professional certifications and degrees profile of a surface project management prototypes and prototype testing psur (periodic safety update report) purchase orders purchasing purchasing controls purchasing department qms (quality management system) qualification (product) qualification of equipment and processes quality assurance (qa) quality control (qc) quality control data quality department quality management systems quality manuals (general) quality manuals - structure contents and examples quality objectives quality plans and quality planning quality policy quality records quality system manuals quality systems quality tools quotes (quotations for a service or product) raps (regulatory affairs professionals society) raw materials raw material suppliers reach (ec 1907/2006) reach rohs recalls (general) receiving inspection recertification (to a standard) record retention requirements records (evidence) and records control reference dimensions refurbishing registrar audits registrars (registration bodies) registration audits registration certificate registration requirements registration to a standard registration to multiple standards regulations and regulatory requirements regulatory affairs (ra) regulatory bodies regulatory compliance regulatory requirements relabeling (of products) reliability analysis and testing remote locations and sites repackaging repair and or overhaul reproducibility (gage r&r) required documents required procedures required processes requirements and specifications research and development (r&d) research thesis research use only (ruo) device or software reselling resistance (electrical) resources response time responsibilities returned products and/or parts reusable medical devices revalidation of a process or product revision control revisions to a document or standard rework rework and repair procedures ring gage risk and opportunities risk based compliance risk based thinking (rbt) risk management and analysis risk management file (rmf) risk register robotics rohs (restriction of hazardous substances) root cause failure analysis rta (refuse to accept) guidance rubber part or material russia s-charts safety (general) safety requirements and regulations salt spray testing samples and sampling plans sample size sampling plans for attribute data sampling plans for variables data sanctioned interpretations sap erp (enterprise resource planning) saudi arabia scales and balances scope (general term) scope of accreditation scope of certification (aka registration) scope of registration/certification changes scope of the qms scrap second party audit self certification sequence and interactions of processes serial numbers service company or industry service providers service provisions service realization severity ranking (fmea) shelf life shipping (general) and shipping requirements shop travelers signatures single use devices (sud) six sigma (general) small companies (small businesses) smed (single minute exchange of dies) software (general topics) software (off the shelf) software company or industry software development life cycle (sdlc) software medical devices software tools (for qa statistics doc control etc.) software validation soldering sop (standard operating procedure) spain spanish spare parts spc (statistical process control) special characteristics special processes specification details specifications (general term) sri lanka stability testing stainless steel stakeholders in a company standard deviation (stdev in statistics) standards (e.g. iso mdd ansi etc.) standards (measurement) startup business statistical analysis and studies statistical analysis tools statutory requirements sted (summary technical documents) sterile medical devices sterile packaging sterility and sterilization techniques sterilization (general) sterilization validation storage (general) storage requirements and specifications strategic planning and objectives student questions subcontracting and subcontractors supplier supplier audits supplier control and monitoring supplier corrective & preventive action supplier data supplier development supplier evaluation/rating/approval supplier nonconformances supplier performance supplier quality engineer (sqe) supplier requirements suppliers (general topics) supplier selection qualification and approval supply chain management support processes surface finish measurement surgical products surveillance audits surveys (general) sustainability swot (strengths weaknesses opportunities and threats) symbolization for devices symbols (general) taguchi designs and analysis tape measure taxes and taxation technical documentation technical files for medical devices tensile strength and tensile strength testing test equipment testing (general testing topics) testing laboratories test methods and procedures and plans test reports tga (therapeutic goods administration) thermocouples third party audits and auditing thread inspection gages thread plug gages and set plugs thread ring gages and setting plugs threads (of fasteners such as nuts and bolts) tolerances (dimensional or other units) top management torque wrench or tool toyota tpm - total productive maintenance tqm (total quality management) traceability (misc) traceability of calibration (measurement) standards traceability of parts materials and products training (general) training (on-the-job) training effectiveness training materials training plan and training matrix training records training requirements training sources and resources transition (between standards or revisions to a standard) transition audits transition period translations (languages) true position ts 16949 - automotive quality system standard ts 16949 4th edition turtle diagrams tyvek pouches uae (united arab emirates) ultrasonic testing uncertainty (aka mu - related to calibration) uncertainty budget (measurement) underwriters laboratories (ul) unique device identification (udi) united kingdom (uk) upper management upper management support usp (united states pharmacopeia) validation (general) validation of machines equipment processes design etc. validation plan validation requirements validation testing value stream mapping (vsm) vda 5 - measurement system analysis vda 6.3 - process audit vda standards verification (general) verification of calibration verification testing virtual manufacturing vision measurement systems (electronic) visual inspection want to buy warranties (general) webinar websites weee (waste electrical and electronic equipment) weekend random topics welding wifi wireless rf transmission wire wire harnesses work environment work instructions (wi) zero defects

Search by Tag

The time now is 12:44 AM. All times are GMT -4.
Your time zone can be changed in your UserCP --> Options.



Misc. Internal Links


NOTE: This forum uses "Cookies"