D
DinuStan
Hi all,
Greetings!!!
For API 6A Chokes, i have some below queries reg testing of validations.
Chokes as per API 6A 20th Edition clause 4 with fulfill the requirements of clause 10.9.
1.What is the difference between the Table 86(Performance Test Requirement) as per clause 10.9 in API Spec 6A and Annex F PR1/PR2 Requirements? since Table 86 doesn't have any detailed procedure clauses and Annex F is just an informative section (it shall be applied if purchaser or manufacturer need).
2. can Table 86 PR1/PR2 test procedure be written by manufacturer since it is only cyclic test for chokes?
Thanks
Dinu
Greetings!!!
For API 6A Chokes, i have some below queries reg testing of validations.
Chokes as per API 6A 20th Edition clause 4 with fulfill the requirements of clause 10.9.
1.What is the difference between the Table 86(Performance Test Requirement) as per clause 10.9 in API Spec 6A and Annex F PR1/PR2 Requirements? since Table 86 doesn't have any detailed procedure clauses and Annex F is just an informative section (it shall be applied if purchaser or manufacturer need).
2. can Table 86 PR1/PR2 test procedure be written by manufacturer since it is only cyclic test for chokes?
Thanks
Dinu