10 Foot Straight Edge Calibration

Hershal

Metrologist-Auditor
Staff member
Super Moderator
#11
dear NTAinc, I would find an accredited lab that can cal large granite plates.

The concept is the same except one direction. A repeat-o-meter or auto-collimator is useful and can give a detailed description and allow detailed uncertainties.

Should be real simple for such a lab.
 
Elsmar Forum Sponsor
N

NTAinc

#12
We actually don't have a surface plate but I was able to find a calibration lab capable of the calibration.

Thanks to everyone for sharing you ideas and expertise.:thanks:
 
D

Daniel Walker - 2011

#13
We actually don't have a surface plate but I was able to find a calibration lab capable of the calibration.

Thanks to everyone for sharing you ideas and expertise.:thanks:
Care to share the name of the lab that you found?
 
Thread starter Similar threads Forum Replies Date
B AAMI Standard - 6 Foot Radius Patient Vicinity Various Other Specifications, Standards, and related Requirements 2
N Procedure/calculation for determining the foot pressure of dial thickness gauge General Measurement Device and Calibration Topics 11
M Getting your foot in the door? Entry level QA Career and Occupation Discussions 4
Marc Great Lakes - 24 foot waves possible! October 2012 Coffee Break and Water Cooler Discussions 1
E Clean Room Cost per sq foot is to have a class 100,000 clean room built Manufacturing and Related Processes 3
Q How do I convert inches of mercury to pounds per foot Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
L Generic Accuracy of a 100 foot Tape Rule General Measurement Device and Calibration Topics 10
K Inspection: Looking for ways to check 10 x 20 foot "checking aid" mylars Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
Icy Mountain Reasonable calibration? 50 foot measuring tape and other basic M&TE General Measurement Device and Calibration Topics 25
H Five Foot Caliper vs. Tape Measure - Tolerance issues General Measurement Device and Calibration Topics 5
Gman2 Give it to me straight - We are going to fail our TS 16949 Re-Certification Audit IATF 16949 - Automotive Quality Systems Standard 11
Roberticus Can Buyer stipulate that all product quality efforts be directed straight through her Supplier Quality Assurance and other Supplier Issues 3
M DIN6930 What table to use - Tolerances of straight line and radii measurements Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
V Can I apply for AS9100 Straight Away? (We don't have any ISO certificates) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
hogheavenfarm ISO then International Railway Industry Standard (IRIS) Or straight to IRIS? Other ISO and International Standards and European Regulations 3
ScottK National Pipe Straight Mechanical (NPSM) Specification? Various Other Specifications, Standards, and related Requirements 6
J Would you recommend starting at Yellow Belt or go straight to Black Belt? Six Sigma 7
Wes Bucey Interview questions - the straight dope! Career and Occupation Discussions 2
H Excluding Design - Would like to go straight to AS9100 for the Aerospace Industry Design and Development of Products and Processes 6
N Non traumatic edge - Remark in some of my company drawings EU Medical Device Regulations 1
D What foreign language proficiency would give the biggest edge to medical device regulatory affairs professionals in the world today or in future? Career and Occupation Discussions 6
J ISO 13715 Edge Condition Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
J Drawing Callout - Arrow pointing to an inner edge where there is a radius Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
somashekar Adhesive Seepage from Die Cut Parts Edge Manufacturing and Related Processes 13
P Inspecting a difficult part - Measuring the centre of a hole to the edge of a rod Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
S Sharp Edge testing method for Plastic or Sheet Metal Enclosure Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
S Cut Edge Quality Specifications for Mild Steel Quality Tools, Improvement and Analysis 6
J Measuring the Small Radius on the Edge of a Strip of Metal Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
J Press Brake Tooling / Back Gauging - Holes for the back stop instead of the Part Edge Manufacturing and Related Processes 8
W Powder Coating Adherence to sharp edge of Steel Manufacturing and Related Processes 6
D Measuring a round edge - Looking for a 20 degree radius gauge General Measurement Device and Calibration Topics 8
M Massachusetts' New Med/Pharma Marketing Law...Leading Edge Various Other Specifications, Standards, and related Requirements 0
BradM Would you go to the edge? Coffee Break and Water Cooler Discussions 13
R What does "deburr" and "edge" mean? Manufacturing and Related Processes 11
B Sharp Edge Measurement - Method of measuring how sharp the edge of a machined part is Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
Marc What Can The US Do To Keep Its Tech Edge? Philosophy, Gurus, Innovation and Evolution 24

Similar threads

Top Bottom