11th Cycle Survey (2001)

gpainter

Quite Involved in Discussions
#1
The 11th cycle survey is available at the ISO website. A few numbers as of December 2001.

510,616 certs. worldwide in 161 countries of those 44,388 are to ISO 9001-2000
 
Elsmar Forum Sponsor

gpainter

Quite Involved in Discussions
#3
Exactly, get your dates set with your auditor up till Dec of 2003. With the added enforcement and change of guide 62, I think more companies will opt out of the registration program.
 
Thread starter Similar threads Forum Replies Date
Ajit Basrur Google celebrates 11th birthday (and other Google artwork) Coffee Break and Water Cooler Discussions 11
J Scope of ISO 9001 clause 10.2 in the product life cycle ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
K Product (Device) Life cycle - Product Life AFTER the Post Market Phase Medical Device and FDA Regulations and Standards News 3
Y Commanded life cycle management tool IEC 62304 - Medical Device Software Life Cycle Processes 1
M Setting deadlines (ex. 45 days) for Document Registration & Review Cycle Document Control Systems, Procedures, Forms and Templates 3
M Informational Draft ANSM’S GUIDELINE Cybersecurity of medical devices integrating software during their life cycle Medical Device and FDA Regulations and Standards News 0
Q ISO 14001:2015 accredited but import most product - CB Raised minor NC on Life Cycle Perspective ISO 14001:2015 Specific Discussions 2
qualprod Calculate number of people in processes, considering cycle time/takt time = quantity of people Lean in Manufacturing and Service Industries 9
qualprod Cycle times, value stream mapping, inventory, average values? Lean in Manufacturing and Service Industries 1
qualprod Criteria for print shop - How do you consider the cycle time in a print shop? Lean in Manufacturing and Service Industries 21
M PDCA cycle - Process mapping - Environmental ISO 14001 ISO 14001:2015 Specific Discussions 1
R ISO 13485:2016 Registration - NC on full cycle of internal audits ISO 13485:2016 - Medical Device Quality Management Systems 7
J Manufacturing Cycle Time Apps General Information Resources 2
R ISO 14001:2015 Life Cycle Perspective ISO 14001:2015 Specific Discussions 11
R Product life cycle and compliance obligation ISO 14001:2015 Specific Discussions 6
R Life Cycle Assessment of a Product Misc. Quality Assurance and Business Systems Related Topics 6
Z Understanding Cycle Time - Why the time of the other activities are left out Lean in Manufacturing and Service Industries 11
P ISO 14001:2015 and Life Cycle Assessment ISO 14001:2015 Specific Discussions 18
O Is a full Internal Audit cycle every year required? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
A Quality system vs SDLC (Software Development Life Cycle) (or ALM)? Other US Medical Device Regulations 2
S Product Bio-burden Limits and Sublethal Cycle Requirements ISO 13485:2016 - Medical Device Quality Management Systems 4
A Stuck at 'Analyse' stage of DMAIC Improvement Cycle on Cosmetic Specification Manufacturing and Related Processes 10
B Number of Biological Indicators for Routine Monitoring of ETO Sterilization Cycle Other Medical Device Regulations World-Wide 8
M Revision of ISO 16142 - Clause on use of standards in the medical device life-cycle Other Medical Device Related Standards 3
S Fractional cycle fail in Eto sterilization validation ISO 13485:2016 - Medical Device Quality Management Systems 3
D QMS 1st Cycle - Indicators and Data ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
2 Complete Cycle for Complaint Process - Idea Searching Customer Complaints 7
K Task and Sub Tasks of Software Life Cycle Phase Quality Assurance and Compliance Software Tools and Solutions 1
arios Understanding adoption of a product to an existing Sterilization Cycle Other US Medical Device Regulations 1
J Line Balance Study and maybe Takt Time and Cycle Time Lean in Manufacturing and Service Industries 3
E Where to Buy IEC 62304 Software Life Cycle IEC 62304 - Medical Device Software Life Cycle Processes 7
V Examples of Risk Assessment (FMEA) through the Life Cycle of the Product Development ISO 14971 - Medical Device Risk Management 16
M Calibration Cycle for Standard Iron & Steel Plate Gage General Measurement Device and Calibration Topics 17
Y Definition Traffic Cycle and Chart Deck Story - Terms related to Quality Management Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 6
L EO Sterilization Cycle Revalidation Intervals ISO 13485:2016 - Medical Device Quality Management Systems 2
P 3 Year Audit Cycle (ISO 17021:2011) General Auditing Discussions 2
somashekar Sampling Technical Files Continually throughout the Certification Cycle EU Medical Device Regulations 6
A TS 16949 Audit Cycle for Remote Locations IATF 16949 - Automotive Quality Systems Standard 17
V Implementation of Traceability Matrix in Validation Life Cycle of Equipment Qualification and Validation (including 21 CFR Part 11) 2
A When does a project end inside a software product? Life Cycle issue IEC 62304 - Medical Device Software Life Cycle Processes 5
D Testing to determine Life Cycle of a Medical Device Reliability Analysis - Predictions, Testing and Standards 7
Hami812 Question on Cycle time for Repair of Electronics Products Lean in Manufacturing and Service Industries 3
P Methods for Measuring Cycle Time in Assembly and Machining Activities Manufacturing and Related Processes 4
J Assembly (Mounting Screws) from Backside and Frontside together in 1 Cycle Manufacturing and Related Processes 8
S Calculating Cycle-Time for a factory line that produces each-design-different parts? Lean in Manufacturing and Service Industries 7
J Within the 3 year certification cycle, is surveillance audit frequency changeable? General Auditing Discussions 3
C Cycle Time Limitation - Conveyor Assembly Line Manual Work Lean in Manufacturing and Service Industries 4
R How do we show our Software Develoment Life Cycle is similar to IEC 62304 Other US Medical Device Regulations 3
M What is your most significant experience in Reducing Injection Moulding Cycle Time? Manufacturing and Related Processes 18
P Takt Time & Cycle Time Calculations Lean in Manufacturing and Service Industries 6

Similar threads

Top Bottom