2010 CB Aerospace Auditor Workshop scheduled for July in Atlanta, Georgia

Sidney Vianna

Post Responsibly
Staff member
Admin
#1
Elsmar Forum Sponsor
#2
Hello Sydney,

Will it be possible for you to convey a request to IAQG?

As this workshop is planned on Thrusday and Friday can IAQG organise the auditor transition course during same week in Atlanta?It would be a big help for auditors from other continents-specially from Asia.You can understand the travel cost for us and due to this we are not able to attend any Aerospace auditor workshop.Sure,IAQG would be interested to maintain the same quality for auditors from other continents.

I understand that the forthcoming auditor transition course would not be conducted by IAQG itself but sure they can arrange one.If a cousre is available in same week,many auditors from APEC region may be able to attend the workshop and training in a single trip.

I am keen to attend your prsentation:D and sure that you can find a way out.
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#3
Hello Sydney,

Will it be possible for you to convey a request to IAQG?

As this workshop is planned on Thrusday and Friday can IAQG organise the auditor transition course during same week in Atlanta?It would be a big help for auditors from other continents-specially from Asia.You can understand the travel cost for us and due to this we are not able to attend any Aerospace auditor workshop.Sure,IAQG would be interested to maintain the same quality for auditors from other continents.

I understand that the forthcoming auditor transition course would not be conducted by IAQG itself but sure they can arrange one.If a cousre is available in same week,many auditors from APEC region may be able to attend the workshop and training in a single trip.

I am keen to attend your prsentation:D and sure that you can find a way out.
Keep in mind that the IAQG is not the provider of the Sanctioned Training. (RABQSA/IRCA) approved Training Providers will be the ones delivering the sanctioned training sessions. From what I gathered this week, during the AAQG/RMC meeting in Daytona Beach, Florida, the sanctioned training will consist of 16 hours remote, e-learning and 3 (or 4) days of classroom sessions, plus test. There is an attempt to see if the provision of a sanctioned training session during that week in Atlanta is feasible, but it has not been decided yet. Remember, if the typical rules will apply for this sanctioned training, we normally limit the number of attendees to 20 in the classroom. Last year's workshop had over 180 attendees. This means that SEVERAL Training Providers would have to be available that week to train such a large number of auditors. According to OASIS, we have over 860 AS9100 AEA's around the World, presently and another 260 AA's ... a whole lot of people to be trained.
 
#4
There is an attempt to see if the provision of a sanctioned training session during that week in Atlanta is feasible
Praying the attempt to be successful.It could be of great help for auditors from APEC region.Auditors from North America may find courses near their home town and all participants to IAQG workshop may not opt for the course in Atlanta.

Is it clear now whether seperate courses need to be completed for three standards or it would be a common course?

Earlier you mentioned that it would be 2-3 days course but now it is 3-4 days plus e learning!

Is continual improvement being applied here also!:tg:
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#5
Let me preamble my further comments by reminding you this is all in a state of flux. My intention is to share some preliminary information with those who can not be present at the AAQG meetings. When you share early information, there is always a risk. So, be aware, things might change.
Is it clear now whether seperate courses need to be completed for three standards or it would be a common course?
All AS auditors would have to complete the 16-hour e-learning modules, 3 (or 4) days for the AS9100C transition, another 1 day for AS9110A transition and another e-learning module for AS9120A transition.
Earlier you mentioned that it would be 2-3 days course but now it is 3-4 days plus e learning!
 
#6
You are doing a great work for all.

No shot to you and if required you will get armoured plates for protection:tg:
 
K

kiwisfly

#8
Hi All,
EAQG Resolution E05 requires all AEA's to attend at least one Aerospace Auditor Workshop in their 3 year certification cycle. Does anyone know if attendance at the AAQA workshop is acceptable for this?

Does the AAQG have a similar requirement? I can't seem to find an AAQG Resolutions Log or an up-to-date IAQG Resolutions Log.

Thanks, :)
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#9
Hi All,
EAQG Resolution E05 requires all AEA's to attend at least one Aerospace Auditor Workshop in their 3 year certification cycle. Does anyone know if attendance at the AAQA workshop is acceptable for this?

Does the AAQG have a similar requirement? I can't seem to find an AAQG Resolutions Log or an up-to-date IAQG Resolutions Log.

Thanks, :)
As far as I know, the AAQG has no similar resolution. Actually I am surprised the EAQG would mandate something like this because, as we are told in the Americas Sector, the Europeans have nothing like the AAQG/RMC workshops. Can you please indicate where one goes to access the EAQG resolutions? I am only familiar with the IAQG resolution log, which identifies which sector(s) the resolution applies to.
 
#10
Resolution #60 October 15, 2009 All EAQG SMS authenticated AEAs are required to attend a national or sector Auditor Conference at least once over each three year authentication period. This resolution is to be effective for all re-authentications from 01/01/2011 and will be effective until superseeded by re-write of EN 9104-003.
Are you talking of this resolution?

I was also worried when I came to know about this but there is a ray of hope as AS 9104-3 will superseed this.
 
Thread starter Similar threads Forum Replies Date
J Aerospace AS9101, Rev D postponed? January 2010 Status AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 100
Sidney Vianna 40,000 new aerospace job openings will be available in 2010 Career and Occupation Discussions 0
H Critical Supplier Agreement acc. to NBOG 2010-1 Annex II EU Medical Device Regulations 5
Q Is EN 55011:2009+A1:2010 is expiring in early 2019? Other ISO and International Standards and European Regulations 1
C IEC 60601-1-6 2010 maps to IEC 62366:2007 - What about 62366-1:2015? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
I Process compressed air and contact with the product (ISO 8573-1:2010) Qualification and Validation (including 21 CFR Part 11) 0
T ISO 12100:2010 - Machine Safety Requirements Other ISO and International Standards and European Regulations 8
E Differences between IEC 60601-1-11:2015 and 2010 Other US Medical Device Regulations 0
L GMW15920-2010 Records Retention for GM Customer and Company Specific Requirements 3
R How to combine ISO 9001:2015 and ISO 29001:2010 into a single QMS Quality Manager and Management Related Issues 3
M VDA 6.3 - 2010 (newest) advanced excel form Document Control Systems, Procedures, Forms and Templates 8
E Gap Analysis for VDA 6.3:2010 and ISO/TS16949:2009 VDA Standards - Germany's Automotive Standards 5
L IEC 60601-1 Amendment 1 3rd Edition and Brazil ABNT NBR IEC 60601-1:2010 IEC 60601 - Medical Electrical Equipment Safety Standards Series 12
B Inquiry about IEC 60601-2-10:2012 & IEC 60601-1-11:2010 IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
W The 2nd printing of the AWS D17.1 2010 which was 2011 - Page missing? Various Other Specifications, Standards, and related Requirements 3
E EN 61010-1:2010 Requirements Interperation for a Product CE Marking (Conformité Européene) / CB Scheme 1
B Cross-reference list/table between HTM 2010 and ISO 17665 Other Medical Device Related Standards 1
4 Understanding ILAC policy P14:12/2010 6.3 part a) General Measurement Device and Calibration Topics 28
Marc Guide To Inspections Of Medical Device Manufacturers - 1997 (06/08/2010) US Food and Drug Administration (FDA) 3
P SharePoint for Document Control - 'Workflows' using SharePoint 2010 Enterprise Document Control Systems, Procedures, Forms and Templates 3
J When will EN 60601-2-4:2010 be harmonized? EU Medical Device Regulations 3
1 Excel 2010 Conditional Formating of Text Excel .xls Spreadsheet Templates and Tools 1
W EN ISO 15225 (2010) - Medical Device Nomenclature - A Harmonized Standard? EU Medical Device Regulations 1
M ILAC p14:12/2010 - Accredited Calibration Certificate Uncertainty General Measurement Device and Calibration Topics 2
S Putting Data Macros in a Form Fields - Access 2010 Quality Assurance and Compliance Software Tools and Solutions 5
J MS Office 2010 - Control of Records - ISO 9001 Clause 4.2.3 c Requirements Document Control Systems, Procedures, Forms and Templates 2
T US Crime (1970 through 2010) - News Article World News 5
Ajit Basrur Corruption Perception Index (CPI) 2010 Coffee Break and Water Cooler Discussions 2
D EFQM (European Foundation For quality Mgmt) 2010 - Processes, Products & Services Service Industry Specific Topics 1
T ISO 10993-10: 2002 vs 2010 version - What are the Major Changes? ISO 13485:2016 - Medical Device Quality Management Systems 2
Marc John Nabors - RIP - May 2010 :( Coffee Break and Water Cooler Discussions 5
I ISO 10993-10:2010 Guidance Document for Irritation and Sensitization Test - Changes ISO 13485:2016 - Medical Device Quality Management Systems 3
C Comparing PPM Year over Year - Determining the PPM decrease from 2009 to 2010 Benchmarking 10
Marc Christmas - 2010 Coffee Break and Water Cooler Discussions 1
P New IATF Communiqu? # 2010-010 - "Auditor Development Process (ADP) ? Process Update" ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 2
G Using Visio 2010 as a Mapping Program for Circuit Boards Quality Assurance and Compliance Software Tools and Solutions 3
Marc To All - Happy Holidays and Merry Christmas - 2010 Coffee Break and Water Cooler Discussions 19
J New Honda SQAM (Supplier Quality Assurance Manual) November 2010 Customer and Company Specific Requirements 10
A ASQ 2010 QP Salary Survey Career and Occupation Discussions 6
Marc iOS 4.2 for iPhone and iPad Released - 22 November 2010 After Work and Weekend Discussion Topics 7
Scott Catron Thanksgiving (USA) - 2010 Coffee Break and Water Cooler Discussions 18
Sidney Vianna Reasons for the Decline of ISO 9001 Registrations in North America (circa 2010) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 142
M Environmental Protection Virtual Event - 2010 Miscellaneous Environmental Standards and EMS Related Discussions 0
Howard Atkins A very Happy Diwali - November 2010 Covegratulations 10
Wes Bucey Halloween Costume this year? (2010) Funny Stuff - Jokes and Humour 14
Marc A NASA Failure Analysis of the April 28 2010 failed balloon launch World News 0
Marc NOAA's Winter 2010-2011 Weather Outlook World News 0
P New Fiat CSR (Customer Specific Requirements) - 26 October 2010 Customer and Company Specific Requirements 14
BradM 2010 Post-Season Baseball Coffee Break and Water Cooler Discussions 13
P New GM CSR (Customer Specific Requirements) - October 2010 Customer and Company Specific Requirements 2
Similar threads


















































Top Bottom