7.5.1.3: Verification of job setup query, sample WI required.

AMIT BALLAL

Super Moderator
#1
Hi !

I am little confused about requirement of "7.5.1.3 : verification of job setup" clause of ISO/TS16949, whether it requires a work instruction for Job setup Or Varification of job setup. :confused:
Please help.

Can any body share a sample work instruction as required in 7.5.1.3: Verification of job setup?

Statement of clause:
"Job set-ups shall be verified whenever performed, such as an initial run of a job, material changeover or job
change.
Work instructions shall be available for set-up personnel. The organization shall use statistical methods of
verification, where applicable.
NOTE Last-off-part comparisons are recommended."


Thanks in advance,:thanx:
Amit:
 
Elsmar Forum Sponsor
Q

q8792271

#4
Yeah, I am sorry about that.

I have no WI example about "Verification Job set-up".

Mark this thread, waitting for other info.
 

Golfman25

Trusted Information Resource
#5
Hi !

I am little confused about requirement of "7.5.1.3 : verification of job setup" clause of ISO/TS16949, whether it requires a work instruction for Job setup Or Varification of job setup. :confused:
Please help.

Can any body share a sample work instruction as required in 7.5.1.3: Verification of job setup?

Statement of clause:
"Job set-ups shall be verified whenever performed, such as an initial run of a job, material changeover or job
change.
Work instructions shall be available for set-up personnel. The organization shall use statistical methods of
verification, where applicable.
NOTE Last-off-part comparisons are recommended."


Thanks in advance,:thanx:
Amit:
The work instruction is generally the "how to" set up the job. It could be as simple as this tool, this material and this machine or a detailed step by step checklist. Verification is checking that first piece to prove the setup was done properly.
 

AMIT BALLAL

Super Moderator
#6
The work instruction is generally the "how to" set up the job. It could be as simple as this tool, this material and this machine or a detailed step by step checklist. Verification is checking that first piece to prove the setup was done properly.
Hi,

As per your answer- do I consider that, for clause 7.5.1.3 (Verification of job setup) clause- Work Instruction is required for Job setup & not for Job Setup approval.


Thanks,
Amit
 
Thread starter Similar threads Forum Replies Date
M IATF 16949 8.5.1.3 Verification of job set-ups - Do we need secondary check? IATF 16949 - Automotive Quality Systems Standard 7
C IATF 16949 Cl 8.5.1.3 - Verification of job set up IATF 16949 - Automotive Quality Systems Standard 4
Q Inquire TS 16949 standard - Clause 7.5.1.3 Verification of 'Job Set-Up' IATF 16949 - Automotive Quality Systems Standard 8
R TS 16949 Clause 7.5.1.3 - Statistical Methods of Verification of Job Set-ups IATF 16949 - Automotive Quality Systems Standard 6
C Verification of CA (Corrective Action) for infrequent job? Nonconformance and Corrective Action 5
L How do I record verification & traceability of production tools to job? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
A Verification of job set-ups - "Last-off-part comparisons are recommended"? 7.5.1.3 IATF 16949 - Automotive Quality Systems Standard 4
C Using SPC charts for Verification of Job Setups Statistical Analysis Tools, Techniques and SPC 3
J Crimp inspection and process verification AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
Q Does a gage used for a visual verification need to be calibrated? Manufacturing and Related Processes 7
M Risk-based approach to Test Method Validation for Design Verification? US Medical Device Regulations 4
K Design: Verification Vs Validation And Validation Vs Transfer ISO 13485:2016 - Medical Device Quality Management Systems 19
B Verification and Validation of calculations (FEA) in OCTG components. Oil and Gas Industry Standards and Regulations 9
D API Q1 clause (5.6.3) Verification of Purchased Products or Activities ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
Cats Clause ISO 9001 - verification of Tape Measures and Steel rules ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 33
S Why does GAGEpack drop the temperature and humidity readings out of the verification event card? Quality Assurance and Compliance Software Tools and Solutions 0
K ISO 17025 Method Validation and Verification for Test Lab ISO 17025 related Discussions 4
C IATF 16949:2016 Major NC pertaining to 7.1.5.2.1 Calibration/verification records IATF 16949 - Automotive Quality Systems Standard 15
T Who's responsible for verification of customer specifications? IATF 16949 - Automotive Quality Systems Standard 17
J Design Input Verification 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
G Injection Molded Parts in Verification & Validation Other Medical Device and Orthopedic Related Topics 3
M Root Cause and Corrective Action for CAPA's lacking validation/verification ISO 13485:2016 - Medical Device Quality Management Systems 19
B Use of Statistical Techniques in Design Verification Design and Development of Products and Processes 18
G Software verification vs. system verification IEC 62304 - Medical Device Software Life Cycle Processes 3
S Nadcap - Heat Treatment Proof of Verification question for Digital results AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
placebo_master What is the difference between "Fitness for Purpose" and "Calibration/Verification"? General Measurement Device and Calibration Topics 6
G Pad Printing Validation OR Verification ISO 13485:2016 - Medical Device Quality Management Systems 4
G Seeking reference guides/ documentation /tips on verification best practices Other Medical Device Related Standards 6
G Verification of Expected Service Life: Max # Reprocessing Cycles IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
G IATF 7.1.5.2.1 Calibration/verification records :Program/software verification IATF 16949 - Automotive Quality Systems Standard 7
G Calculating Ppk for Design Verification - Variable Sampling Design and Development of Products and Processes 15
A Formel Q Konkret : § 4.3.1 D/TLD verification IATF 16949 - Automotive Quality Systems Standard 1
J Design Verification Testing and Statistics Reliability Analysis - Predictions, Testing and Standards 3
G How to Record Informal Testing (Not Verification/Validation) Other Medical Device and Orthopedic Related Topics 15
C Items used for Design Verification Design and Development of Products and Processes 7
I User ID verification for in-house e-signature compliance Qualification and Validation (including 21 CFR Part 11) 2
R Validation of Software used in Verification Testing ISO 13485:2016 - Medical Device Quality Management Systems 2
R SaMD Verification & Validation IEC 62304 - Medical Device Software Life Cycle Processes 6
H CAPA effectiveness verification methods for different types of CA Nonconformance and Corrective Action 10
J Managing design verification regression testing of design changes Design and Development of Products and Processes 1
M Validation of Data verification tool per 21 CFR 820 Quality Assurance and Compliance Software Tools and Solutions 1
placebo_master Risks of executing a verification protocol against existing data ISO 13485:2016 - Medical Device Quality Management Systems 4
placebo_master Verification Protocols - when to implement them (and when to skip in lieu of a report) 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
I Software (SaMD) mobile application verification testing: objective evidence Medical Information Technology, Medical Software and Health Informatics 2
M Reference part calibration or verification General Measurement Device and Calibration Topics 12
J Verification of purchased product / supplier questionnaires ISO 13485:2016 - Medical Device Quality Management Systems 2
H Verification of the purchased products which are services, like continuous IT services ISO 13485:2016 - Medical Device Quality Management Systems 7
K Why does load cell supplier requires force verification General Measurement Device and Calibration Topics 3
D Use Error Risk Controls and Control Verification ISO 14971 - Medical Device Risk Management 6
M Software verification and validation AS9100 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4

Similar threads

Top Bottom