Acceptance criteria for gauges

SACHIN GUPTA

Starting to get Involved
#1
Dear all ,
We had an audit of customer , he asked us about the acceptance criteria for gauges which we are using . we show him our acceptance criteria but he refused and asked from where you have taken this criteria from which standard like ISO, ASTM,IS. etc. I have search and found an Indian Standard for Maximum possible error in gauge We can take maximum possible error as a our acceptance criteria or not. of we have take from Standard .

waiting for your reply .
 
Last edited by a moderator:
Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#2
What do you mean by "acceptance criteria for gauges..."? The standard you posted is for vernier calipers. Are you actually using vernier calipers, as opposed to dial or digital calipers?
 

SACHIN GUPTA

Starting to get Involved
#3
For calibration purpose we have decide our acceptance criteria , what method we follow to define acceptance criteria for verniers ,external micrometer,height gauge, depth gauge,plunger dial indicator,lever dial indicator.
 

AMIT BALLAL

Trusted Information Resource
#4
Dear all ,
We had an audit of customer , he asked us about the acceptance criteria for gauges which we are using . we show him our acceptance criteria but he refused and asked from where you have taken this criteria from which standard like ISO, ASTM,IS. etc. I have search and found an Indian Standard for Maximum possible error in gauge We can take maximum possible error as a our acceptance criteria or not. of we have take from Standard .
For reference I am attaching standard of IS 3651:1982 .
waiting for your reply .
Please do not upload any standards / copyrighted documents here.
 

AMIT BALLAL

Trusted Information Resource
#5
For calibration purpose we have decide our acceptance criteria , what method we follow to define acceptance criteria for verniers ,external micrometer,height gauge, depth gauge,plunger dial indicator,lever dial indicator.
Sachin, you can define acceptance criteria for gages you are using referring to standards as mentioned in the standards on calibration report of the gage. You can talk to the calibration agency in case of any doubts. Additionally, you can define it based on the accuracy required (based on the requirement of your organization).

Enclosed herewith an example of acceptance criteria.
 

Attachments

SACHIN GUPTA

Starting to get Involved
#6
Sachin, you can define acceptance criteria for gages you are using referring to standards as mentioned in the standards on calibration report of the gage. You can talk to the calibration agency in case of any doubts. Additionally, you can define it based on the accuracy required (based on the requirement of your organization).

Enclosed herewith an example of acceptance criteria.
thanks for your suggestion
 
#7
Please do not upload any standards / copyrighted documents here.
Dear Sir,
In MSA in attribute study
1. How to calculate cross tabulations?​
2. How to calculate Effectiveness, Miss Rate & False Alarm Rate?​
3. What is the alpha value and how do I determine this?​
4. Kappa - how exactly to use the formula​
please suggest.
 
Thread starter Similar threads Forum Replies Date
A Plug Gauge Size shows increase after use? Criteria for acceptance of the gauges? General Measurement Device and Calibration Topics 5
H Medical Device Label Acceptance Criteria Manufacturing and Related Processes 4
D What are the acceptance criteria/requirements for Stability Study? General Measurement Device and Calibration Topics 7
L Gage R&R TMV Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M V&V phase: Justification of acceptance criteria (statistical method ) - (Medical Device) Design and Development of Products and Processes 2
O GR&R Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
S Shore A hardness Tester Acceptance Criteria Standard Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 2
lanley liao Purchase Acceptance Criteria - Tensile testing Oil and Gas Industry Standards and Regulations 2
R Procedure, Frequency and Acceptance Criteria for Replicate, Recalibration, Before-After and Intermediate Checks ISO 17025 related Discussions 8
M Characterization Testing - NO acceptance criteria, no minimum performance requirement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
J AIAG PPAP: 2.2.11.3 Acceptance Criteria for Initial Study (page 9, 4th edition) APQP and PPAP 1
C FDA on changing acceptance criteria re: analytical method validation US Food and Drug Administration (FDA) 1
B IATF 16949 Cl. 8.6.6 - Acceptance Criteria - Zero Defects Attribute Data Sampling IATF 16949 - Automotive Quality Systems Standard 2
P Medical Device Validation Protocols and Reports - Acceptance Criteria Other Medical Device and Orthopedic Related Topics 3
C Software Unit Acceptance Criteria (5.5.4) IEC 62304 - Medical Device Software Life Cycle Processes 3
J Acceptance Criteria in 8.1.1 e) of IATF 16949 IATF 16949 - Automotive Quality Systems Standard 2
O Acceptance criteria bacterial endotoxins immunosera for human use Manufacturing and Related Processes 3
I As a part of validation, should i include the acceptance criteria of CPk index >1.33? Qualification and Validation (including 21 CFR Part 11) 4
V Acceptance Criteria Gage R&R - Simple vs Complex Techniques Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
A 5.5.3 - Software Unit Acceptance Criteria (Risk Control Measures) IEC 62304 - Medical Device Software Life Cycle Processes 3
M Establishment of Acceptance Criteria for a Weigh Balance General Measurement Device and Calibration Topics 3
X How to define Calibration Acceptance Criteria General Measurement Device and Calibration Topics 3
P Gage R (no reproducibility) - Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
V Validation Test and Acceptance Criteria for Compressed Air Qualification and Validation (including 21 CFR Part 11) 3
I Dual Acceptance Criteria: Cpk and Individual Values Statistical Analysis Tools, Techniques and SPC 3
L Acceptance Criteria for External Calibrated Standards IATF 16949 - Automotive Quality Systems Standard 1
A Risk Acceptance Criteria in ISO 14971 ISO 14971 - Medical Device Risk Management 19
G Acceptance Criteria when Verifying a Gauge General Measurement Device and Calibration Topics 2
D Renault Painting Defect Acceptance Criteria Manufacturing and Related Processes 4
B Surface Roughness Tester Acceptance Criteria Calibration Frequency (Interval) 4
H Package Integrity Testing Acceptance Criteria ISO 13485:2016 - Medical Device Quality Management Systems 3
D 21 CFR 820.80 In-Process Acceptance Criteria requirements for IVDs 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
S Acceptance Criteria for Scratches on Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 3
JoCam Nadcap AC7120 (Audit Criteria for Circuit Card Assemblies) - Acceptance Criteria AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
A Acceptance Criteria - ISO 9001:2008 Clause 8.2.4 - Questionable Audit Finding? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 40
Q How to meet Clause 7.1.2 Acceptance Criteria in ISO TS 16949 IATF 16949 - Automotive Quality Systems Standard 7
J IPC-A-610 E Thermal Plane Acceptance Criteria for D-Pak Component Other ISO and International Standards and European Regulations 2
S Acceptance Criteria at Design Verification Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Labels - ASTM D3330/D3330M Acceptance Criteria for Adhesion 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
optomist1 Tensile Test Crimped Electrical Terminal Acceptance Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
V The approach/criteria of setting Acceptance Limits Method Validation Parameters Statistical Analysis Tools, Techniques and SPC 1
6 Acceptance Criteria For pH Meters and other Laboratory Equipment Measurement Uncertainty (MU) 16
V How to define Risk Acceptance Criteria? ISO 13485:2016 - Medical Device Quality Management Systems 3
Rameshwar25 Acceptance Criteria for Attribute MSA Study Effectiveness Summary Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
D What are API Equipment Cleaning Requirements and Acceptance Criteria? US Food and Drug Administration (FDA) 3
V How are the Acceptance Criteria for Content Uniformity & Dissolution Superior? Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
Q Sampling Plan Acceptance Criteria - ISO TS 16949 Clause 7.1.2 IATF 16949 - Automotive Quality Systems Standard 8
1 Acceptance criteria and related standard for 1 micron Lever Type dial Indicator General Measurement Device and Calibration Topics 5
M Acceptance Criteria for Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
R Acceptance Criteria for Calibration by an External Calibration Laboratory General Measurement Device and Calibration Topics 9

Similar threads

Top Bottom